[PlanetCCRMA] Still stuck with Hammerfall HDSP.....

[raf@interaccess.com]

I noticed that Ludo has a USB controller also using IRQ 5.  Doing something to get one or the other on its own IRQ might be worth while. I think Fernando's suggestion to try moving the HDSP to another slot is based on this same suspicion, but I wonder: is that USB controller on the motherboard? Perhaps disabling it (or even unplugging it if it's a PCI card) would be informative.

  --Bob Falesch, who's about to try setting up an HDSP :)  


00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 02) (prog-if
00 [U
HCI])
        Subsystem: Intel Corp.: Unknown device 5247
        Flags: bus master, medium devsel, latency 0, IRQ 5
        I/O ports at e880 [size=32]


01:00.0 Multimedia audio controller: Xilinx Corporation RME Hammerfall DSP
(rev 96)
        Flags: bus master, medium devsel, latency 32, IRQ 5
        Memory at ff8f0000 (32-bit, non-prefetchable) [size=64K]