[PlanetCCRMA] HDSP 9652 - test drive kernel

[Mark Knecht]

Fernando,
   Hi. Not totally there, but making some headway. I got my sound card
transferred over to the new machine. The good news is that alsaconf
recognizes it. The bad news is the driver doesn't load. Messages below.

NOTE: I noticed that alsaconf says that you can turn logging on with the
-L option, but I cannot find the log file. The --help option says /tmp,
but it's not there. Can anyone see this file?

Thanks,
Mark

[mark@Wizard mark]$ uname -a
Linux Wizard 2.4.20-1.12.ll.acpi #1 Sun Feb 2 22:52:36 PST 2003 i686
athlon i386 GNU/Linux
[mark@Wizard mark]$ lspci -v
<SNIP>
00:0e.0 Multimedia audio controller: Xilinx, Inc. RME Hammerfall DSP
(rev 68)
        Flags: bus master, medium devsel, latency 32, IRQ 10
        Memory at e9800000 (32-bit, non-prefetchable) [size=64K]
<SNIP>

<SNIP - from alsaconf>

Loading driver..
Starting sound driver snd-hdsp
/lib/modules/2.4.20-1.12.ll.acpi/kernel/drivers/sound/pci/rme9652/snd-hdsp.o: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
      You may find more information in syslog or the output from dmesg
init_module: No such device
/lib/modules/2.4.20-1.12.ll.acpi/kernel/drivers/sound/pci/rme9652/snd-hdsp.o: insmod /lib/modules/2.4.20-1.12.ll.acpi/kernel/drivers/sound/pci/rme9652/snd-hdsp.o failed
/lib/modules/2.4.20-1.12.ll.acpi/kernel/drivers/sound/pci/rme9652/snd-hdsp.o: insmod snd-hdsp failed
                                                           [FAILED]
Setting default volumes..
===============================================================================

 Now ALSA is ready to use.
 For adjustment of volumes, please use alsamixer or gamix.

 Have a lot of fun! 
[root@Wizard etc]#

<SNIP - from dmesg>

Adding Swap: 1052216k swap-space (priority -1)
ip_tables: (C) 2000-2002 Netfilter core team
Broadcom 4401 Ethernet Driver bcm4400 ver. 1.0.1 (08/26/02)
eth0: Broadcom BCM4401 100Base-T found at mem ea000000, IRQ 3, node addr
00e018ec47ff
bcm4400: eth0 NIC Link is Up, 100 Mbps half duplex
NETDEV WATCHDOG: eth0: transmit timed out
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found