[Long posting!] Re: [PlanetCCRMA] Self-configuring system Was:*Solved*
Midisport8x8/s Was:Chasing my tail with ALSA
Michael
mikes@tbc.net
Tue Feb 17 19:16:01 2004
Apologies for the long post, people... lots of information to wade
through ;-)
Mark Knecht wrote:
>On Tue, 2004-02-17 at 17:05, Michael wrote:
>
>
>>Hi all,
>>Rebooted, and still don't have the Midisport 8x8. Yep, I even tried
>>unplugging it, and replugging it hot to see if the system would pick it
>>up, but it didn't (though lsusb acknowledged it's removal when I pulled
>>the cable, and it's presence when recabled). Well, at least Qjackctl and
>>Audour works :-) Now if I can only get the Midisport 8x8 to work this
>>would system be perfect.
>>
>>-Mike
>>
>>
>>
>Mike,
> You might just want to post your current modules.conf file one more
>time to let us take another look. Also, I don't know if it's still
>required, but much earlier we had to make changes to the /etc/hotplug
>directory and put some values in files there to get the system to
>recognize the 2x2. Did you do anything like that? It may all be in the
>standard files now and not be necessary. I don't know. Fernando's got a
>page on this sort of stuff on the Planet site. I'm sure you've gone
>through this completely already. However, the state you are currently in
>is the state I was in when hotplug wasn't actually getting run. The
>Midisport 's require the system to load firmware, so two potential
>problems pop up:
>
>1) The system recognized the device but doesn't load the right firmware.
>
>2) Hotplug doesn't actually run.
>
>To me it sounds more like the first of the two.
>
> Anything in /var/log/messages? dmesg?
>
>Good luck,
>Mark
>
>
Due to this long posting, look/search for @@@ at the begining of my
comments.... I have to agree with you, I think about the firmware not
running, but why is it I can get it to run after pushing the system
through a configuration manually, but lose it on reboot? Is that right?
@@@ Here is my current modules.conf file as suggested by Fernando:
options ide-cd ignore='hdc hdd'
alias usb-controller usb-uhci
# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF verion 0.9.0 ---
alias char-major-116 snd
alias snd-card-0 snd-emu10k1
alias snd-card-1 snd-usb-audio
# --- OSS compatibility
alias char-major-14 soundcore
alias sound-slot-0 snd-card-0
alias sound-slot-1 snd-card-1
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
alias sound-service-1-0 snd-mixer-oss
alias sound-service-1-3 snd-pcm-oss
alias sound-service-1-12 snd-pcm-oss
# --- Options
options snd major=116 cards_limit=2 device_mode=0666
options snd-emu10k1 index=0
options snd-usb-audio index=1
# --- Keep modules from being autocleaned
add options -k snd-card-0
add options -k snd-card-1
@@@ In /etc/hotplug, I have:
#
# Listing a module here prevents the hotplug scripts from loading it.
# Usually that'd be so that some other driver will bind it instead,
# no matter which driver happens to get probed first. Sometimes user
# mode tools can also control driver binding.
#
# Syntax: driver name alone (without any spaces) on a line. Other
# lines are ignored.
#
# uhci ... usb-uhci handles the same pci class
usb-uhci
# tulip ... de4x5, xircom_tulip_cb, dmfe (...) handle same devices
de4x5
# At least 2.4.3 and later xircom_tulip doesn't have that conflict
# xircom_tulip_cb
dmfe
# Fernando's suggestions to get my machine going again.... 02-14-04
audio
usb-midi
@@@ For var/log/messages, I have: (one more comment below....)
Feb 17 20:45:47 localhost syslogd 1.4.1: restart.
Feb 17 20:45:47 localhost syslog: syslogd startup succeeded
Feb 17 20:45:47 localhost syslog: klogd startup succeeded
Feb 17 20:45:47 localhost kernel: klogd 1.4.1, log source = /proc/kmsg
started.
Feb 17 20:45:47 localhost kernel: Linux version
2.4.24-1.ll.rh90.ccrmasmp (root@cmn19.Stanford.EDU) (gcc version 3.2.2
20030222 (Red Hat Linux 3.2.2-5)) #1
SMP Mon Jan 5 13:48:52 PST 2004
Feb 17 20:45:47 localhost kernel: BIOS-provided physical RAM map:
Feb 17 20:45:47 localhost kernel: BIOS-e820: 0000000000000000 -
000000000009fc00 (usable)
Feb 17 20:45:47 localhost kernel: BIOS-e820: 000000000009fc00 -
00000000000a0000 (reserved)
Feb 17 20:45:47 localhost kernel: BIOS-e820: 00000000000e0000 -
0000000000100000 (reserved)
Feb 17 20:45:47 localhost kernel: BIOS-e820: 0000000000100000 -
000000001fec0000 (usable)
Feb 17 20:45:47 localhost kernel: BIOS-e820: 000000001fec0000 -
000000001fef8000 (ACPI data)
Feb 17 20:45:47 localhost kernel: BIOS-e820: 000000001fef8000 -
000000001ff00000 (ACPI NVS)
Feb 17 20:45:47 localhost kernel: BIOS-e820: 00000000ffb80000 -
00000000ffc00000 (reserved)
Feb 17 20:45:47 localhost kernel: BIOS-e820: 00000000fff00000 -
0000000100000000 (reserved)
Feb 17 20:45:47 localhost kernel: 0MB HIGHMEM available.
Feb 17 20:45:47 localhost kernel: 510MB LOWMEM available.
Feb 17 20:45:47 localhost irqbalance: irqbalance startup succeeded
Feb 17 20:45:47 localhost kernel: On node 0 totalpages: 130752
Feb 17 20:45:47 localhost kernel: zone(0): 4096 pages.
Feb 17 20:45:47 localhost kernel: zone(1): 126656 pages.
Feb 17 20:45:47 localhost kernel: zone(2): 0 pages.
Feb 17 20:45:47 localhost kernel: ACPI: RSDP (v000
AMI ) @ 0x000ff980
Feb 17 20:45:47 localhost kernel: ACPI: RSDT (v001 D815EA D815EEA2
0x20021106 MSFT 0x00001011) @ 0x1fef0000
Feb 17 20:45:47 localhost kernel: ACPI: FADT (v001 D815EA EA81510A
0x20021106 MSFT 0x00001011) @ 0x1fef1000
Feb 17 20:45:47 localhost kernel: ACPI: DSDT (v001 D815E2 EA81520A
0x00000023 MSFT 0x0100000b) @ 0x00000000
Feb 17 20:45:47 localhost kernel: Kernel command line: ro root=LABEL=/
hdc=ide-scsi hdd=ide-scsi
Feb 17 20:45:47 localhost kernel: ide_setup: hdc=ide-scsi
Feb 17 20:45:47 localhost kernel: ide_setup: hdd=ide-scsi
Feb 17 20:45:47 localhost kernel: Found and enabled local APIC!
Feb 17 20:45:47 localhost kernel: Initializing CPU#0
Feb 17 20:45:47 localhost kernel: Detected 994.630 MHz processor.
Feb 17 20:45:47 localhost kernel: Console: colour VGA+ 80x25
Feb 17 20:45:47 localhost kernel: Calibrating delay loop... 1966.08 BogoMIPS
Feb 17 20:45:47 localhost kernel: Memory: 513248k/523008k available
(1687k kernel code, 9372k reserved, 585k data, 208k init, 0k highmem)
Feb 17 20:45:47 localhost kernel: Dentry cache hash table entries: 65536
(order: 7, 524288 bytes)
Feb 17 20:45:47 localhost kernel: Inode cache hash table entries: 32768
(order: 6, 262144 bytes)
Feb 17 20:45:47 localhost kernel: Mount cache hash table entries: 512
(order: 0, 4096 bytes)
Feb 17 20:45:47 localhost kernel: Buffer cache hash table entries: 32768
(order: 5, 131072 bytes)
Feb 17 20:45:47 localhost kernel: Page-cache hash table entries: 131072
(order: 7, 524288 bytes)
Feb 17 20:45:47 localhost nfslock: rpc.statd startup succeeded
Feb 17 20:45:47 localhost rpc.statd[1110]: Version 1.0.1 Starting
Feb 17 20:45:47 localhost kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
Feb 17 20:45:47 localhost kernel: CPU: L2 cache: 256K
Feb 17 20:45:47 localhost kernel: Intel machine check architecture
supported.
Feb 17 20:45:47 localhost keytable: Loading keymap:
Feb 17 20:45:47 localhost kernel: Intel machine check reporting enabled
on CPU#0.
Feb 17 20:45:47 localhost keytable:
Feb 17 20:45:47 localhost rpc.statd[1110]: unable to register (statd, 1,
udp).
Feb 17 20:45:47 localhost keytable: Loading system font:
Feb 17 20:45:47 localhost kernel: Enabling fast FPU save and restore...
done.
Feb 17 20:45:47 localhost keytable:
Feb 17 20:45:47 localhost kernel: Enabling unmasked SIMD FPU exception
support... done.
eb 17 20:45:47 localhost rc: Starting keytable: succeeded
Feb 17 20:45:47 localhost kernel: Checking 'hlt' instruction... OK.
Feb 17 20:45:47 localhost kernel: POSIX conformance testing by UNIFIX
Feb 17 20:45:48 localhost kernel: mtrr: v1.40 (20010327) Richard Gooch
(rgooch@atnf.csiro.au)
Feb 17 20:45:48 localhost kernel: mtrr: detected mtrr type: Intel
Feb 17 20:45:48 localhost kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
Feb 17 20:45:48 localhost kernel: CPU: L2 cache: 256K
Feb 17 20:45:48 localhost kernel: Intel machine check reporting enabled
on CPU#0.
Feb 17 20:45:48 localhost random: Initializing random number generator:
succeeded
Feb 17 20:45:48 localhost kernel: CPU0: Intel Pentium III (Coppermine)
stepping 06
Feb 17 20:45:48 localhost kernel: per-CPU timeslice cutoff: 731.65 usecs.
Feb 17 20:45:48 localhost kernel: SMP motherboard not detected.
Feb 17 20:45:48 localhost kernel: enabled ExtINT on CPU#0
Feb 17 20:45:48 localhost kernel: ESR value before enabling vector: 00000000
Feb 17 20:45:48 localhost kernel: ESR value after enabling vector: 00000000
Feb 17 20:45:48 localhost kernel: Using local APIC timer interrupts.
Feb 17 20:45:48 localhost kernel: calibrating APIC timer ...
Feb 17 20:45:48 localhost kernel: ..... CPU clock speed is 994.0349 MHz.
Feb 17 20:45:48 localhost kernel: ..... host bus clock speed is 132.0579
MHz.
Feb 17 20:45:48 localhost kernel: cpu: 0, clocks: 132579, slice: 66289
Feb 17 20:45:48 localhost kernel:
CPU0<T0:132576,T1:66272,D:15,S:66289,C:132579>
Feb 17 20:45:48 localhost kernel: Waiting on wait_init_idle (map = 0x0)
Feb 17 20:45:48 localhost kernel: All processors have done init_idle
Feb 17 20:45:48 localhost kernel: ACPI: Subsystem revision 20031002
Feb 17 20:45:48 localhost kernel: PCI: PCI BIOS revision 2.10 entry at
0xfda95, last bus=1
Feb 17 20:45:48 localhost kernel: PCI: Using configuration type 1
Feb 17 20:45:48 localhost kernel: ACPI: IRQ9 SCI: Level Trigger.
Feb 17 20:45:48 localhost kernel: ACPI: Interpreter enabled
Feb 17 20:45:48 localhost kernel: ACPI: Using PIC for interrupt routing
Feb 17 20:45:48 localhost kernel: ACPI: System [ACPI] (supports S0 S1 S4 S5)
Feb 17 20:45:48 localhost kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
Feb 17 20:45:48 localhost kernel: PCI: Probing PCI hardware (bus 00)
Feb 17 20:45:48 localhost kernel: Transparent bridge - Intel Corp.
82801BA/CA/DB/EB PCI Bridge
Feb 17 20:45:48 localhost rc: Starting pcmcia: succeeded
Feb 17 20:45:48 localhost kernel: ACPI: Power Resource [FDDP] (off)
Feb 17 20:45:48 localhost kernel: ACPI: Power Resource [URP1] (off)
Feb 17 20:45:48 localhost kernel: ACPI: Power Resource [URP2] (off)
Feb 17 20:45:48 localhost kernel: ACPI: Power Resource [LPTP] (off)
Feb 17 20:45:48 localhost kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs
3 4 5 6 7 9 10 *11 12)
Feb 17 20:45:48 localhost kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs
3 4 5 6 7 9 *10 11 12)
Feb 17 20:45:48 localhost kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs
3 4 5 6 7 9 10 11 12)
Feb 17 20:45:48 localhost kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs
3 4 5 6 7 9 10 *11 12)
Feb 17 20:45:48 localhost kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs
3 4 5 6 7 9 10 11 12)
Feb 17 20:45:48 localhost kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs
3 4 5 6 7 9 10 *11 12)
Feb 17 20:45:48 localhost kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs
3 4 5 6 7 9 10 11 12)
Feb 17 20:45:48 localhost kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs
3 4 5 6 7 *9 10 11 12)
Feb 17 20:45:48 localhost kernel: PCI: Probing PCI hardware
Feb 17 20:45:48 localhost kernel: ACPI: PCI Interrupt Link [LNKA]
enabled at IRQ 11
Feb 17 20:45:48 localhost kernel: ACPI: PCI Interrupt Link [LNKD]
enabled at IRQ 11
Feb 17 20:45:48 localhost kernel: ACPI: PCI Interrupt Link [LNKB]
enabled at IRQ 10
Feb 17 20:45:48 localhost kernel: ACPI: PCI Interrupt Link [LNKH]
enabled at IRQ 9
Feb 17 20:45:48 localhost kernel: ACPI: PCI Interrupt Link [LNKF]
enabled at IRQ 11
Feb 17 20:45:48 localhost kernel: PCI: Using ACPI for IRQ routing
Feb 17 20:45:48 localhost kernel: PCI: if you experience problems, try
using option 'pci=noacpi' or even 'acpi=off'
Feb 17 20:45:48 localhost kernel: isapnp: Scanning for PnP cards...
Feb 17 20:45:48 localhost kernel: isapnp: No Plug & Play device found
Feb 17 20:45:48 localhost kernel: Linux NET4.0 for Linux 2.4
Feb 17 20:45:48 localhost kernel: Based upon Swansea University Computer
Society NET3.039
Feb 17 20:45:48 localhost kernel: Initializing RT netlink socket
Feb 17 20:45:48 localhost kernel: apm: BIOS version 1.2 Flags 0x03
(Driver version 1.16)
Feb 17 20:45:48 localhost kernel: apm: overridden by ACPI.
Feb 17 20:45:48 localhost kernel: Starting kswapd
Feb 17 20:45:48 localhost kernel: VFS: Disk quotas vdquot_6.5.1
Feb 17 20:45:48 localhost kernel: ACPI: Power Button (FF) [PWRF]
Feb 17 20:45:48 localhost kernel: ACPI: Processor [CPU1] (supports C1)
Feb 17 20:45:48 localhost kernel: pty: 2048 Unix98 ptys configured
Feb 17 20:45:48 localhost kernel: Serial driver version 5.05c
(2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
Feb 17 20:45:48 localhost kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
Feb 17 20:45:48 localhost kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A
Feb 17 20:45:48 localhost kernel: Redundant entry in serial pci_table.
Please send the output of
Feb 17 20:45:48 localhost kernel: lspci -vv, this message
(12b9,1008,12b9,00d7)
Feb 17 20:45:48 localhost kernel: and the manufacturer and name of
serial board or modem board
Feb 17 20:45:48 localhost sshd: succeeded
Feb 17 20:45:48 localhost kernel: to serial-pci-info@lists.sourceforge.net.
Feb 17 20:45:48 localhost kernel: ttyS04 at port 0xdfe0 (irq = 11) is a
16550A
Feb 17 20:45:49 localhost kernel: Real Time Clock Driver v1.10e
Feb 17 20:45:49 localhost kernel: Floppy drive(s): fd0 is 1.44M
Feb 17 20:45:49 localhost kernel: FDC 0 is a post-1991 82077
Feb 17 20:45:46 localhost iptables: succeeded
Feb 17 20:45:49 localhost kernel: NET4: Frame Diverter 0.46
Feb 17 20:45:46 localhost sysctl: net.ipv4.ip_forward = 0
Feb 17 20:45:49 localhost kernel: RAMDISK driver initialized: 16 RAM
disks of 4096K size 1024 blocksize
Feb 17 20:45:46 localhost sysctl: net.ipv4.conf.default.rp_filter = 1
Feb 17 20:45:49 localhost kernel: Uniform Multi-Platform E-IDE driver
Revision: 7.00beta4-2.4
Feb 17 20:45:46 localhost sysctl: kernel.sysrq = 0
Feb 17 20:45:49 localhost kernel: ide: Assuming 33MHz system bus speed
for PIO modes; override with idebus=xx
Feb 17 20:45:46 localhost sysctl: kernel.core_uses_pid = 1
Feb 17 20:45:49 localhost kernel: ICH2: IDE controller at PCI slot 00:1f.1
Feb 17 20:45:46 localhost sysctl: kernel.lowlatency = 1
Feb 17 20:45:49 localhost kernel: ICH2: chipset revision 2
Feb 17 20:45:46 localhost network: Setting network parameters: succeeded
Feb 17 20:45:49 localhost kernel: ICH2: not 100%% native mode: will
probe irqs later
Feb 17 20:45:49 localhost kernel: ide0: BM-DMA at 0xffa0-0xffa7,
BIOS settings: hda:DMA, hdb:pio
Feb 17 20:45:49 localhost kernel: ide1: BM-DMA at 0xffa8-0xffaf,
BIOS settings: hdc:DMA, hdd:DMA
Feb 17 20:45:49 localhost kernel: hda: Maxtor 5T060H6, ATA DISK drive
Feb 17 20:45:49 localhost kernel: blk: queue c03d5740, I/O limit 4095Mb
(mask 0xffffffff)
Feb 17 20:45:49 localhost kernel: hdc: Hewlett-Packard CD-Writer Plus
9500, ATAPI CD/DVD-ROM drive
Feb 17 20:45:49 localhost kernel: hdd: LG DVD-ROM DRD-8160B, ATAPI
CD/DVD-ROM drive
Feb 17 20:45:49 localhost kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Feb 17 20:45:49 localhost kernel: ide1 at 0x170-0x177,0x376 on irq 15
Feb 17 20:45:49 localhost kernel: hda: attached ide-disk driver.
Feb 17 20:45:49 localhost kernel: hda: host protected area => 1
Feb 17 20:45:49 localhost kernel: hda: 120103200 sectors (61493 MB)
w/2048KiB Cache, CHS=7476/255/63, UDMA(100)
Feb 17 20:45:49 localhost kernel: Partition check:
Feb 17 20:45:49 localhost kernel: hda: hda1 hda2 hda3 hda4 < hda5 >
Feb 17 20:45:49 localhost kernel: ide: late registration of driver.
Feb 17 20:45:49 localhost kernel: md: md driver 0.90.0 MAX_MD_DEVS=256,
MD_SB_DISKS=27
Feb 17 20:45:49 localhost kernel: md: Autodetecting RAID arrays.
Feb 17 20:45:49 localhost kernel: md: autorun ...
Feb 17 20:45:50 localhost kernel: md: ... autorun DONE.
Feb 17 20:45:50 localhost kernel: pci_hotplug: PCI Hot Plug PCI Core
version: 0.5
Feb 17 20:45:50 localhost kernel: Initializing Cryptographic API
Feb 17 20:45:50 localhost kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Feb 17 20:45:50 localhost kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Feb 17 20:45:50 localhost kernel: IP: routing cache hash table of 4096
buckets, 32Kbytes
Feb 17 20:45:50 localhost kernel: TCP: Hash tables configured
(established 32768 bind 32768)
Feb 17 20:45:50 localhost kernel: Linux IP multicast router 0.06 plus PIM-SM
Feb 17 20:45:50 localhost kernel: NET4: Unix domain sockets 1.0/SMP for
Linux NET4.0.
Feb 17 20:45:50 localhost kernel: RAMDISK: Compressed image found at block 0
Feb 17 20:45:50 localhost kernel: Freeing initrd memory: 151k freed
Feb 17 20:45:50 localhost kernel: VFS: Mounted root (ext2 filesystem).
Feb 17 20:45:50 localhost kernel: Journalled Block Device driver loaded
Feb 17 20:45:50 localhost kernel: kjournald starting. Commit interval 5
seconds
Feb 17 20:45:50 localhost kernel: EXT3-fs: mounted filesystem with
ordered data mode.
Feb 17 20:45:50 localhost kernel: Freeing unused kernel memory: 208k freed
Feb 17 20:45:50 localhost kernel: usb.c: registered new driver usbdevfs
Feb 17 20:45:50 localhost kernel: usb.c: registered new driver hub
Feb 17 20:45:50 localhost kernel: usb-uhci.c: $Revision: 1.275 $ time
14:04:23 Jan 5 2004
Feb 17 20:45:50 localhost kernel: usb-uhci.c: High bandwidth mode enabled
Feb 17 20:45:50 localhost kernel: usb-uhci.c: USB UHCI at I/O 0xef40, IRQ 11
Feb 17 20:45:50 localhost kernel: usb-uhci.c: Detected 2 ports
Feb 17 20:45:50 localhost kernel: usb.c: new USB bus registered,
assigned bus number 1
Feb 17 20:45:50 localhost kernel: hub.c: USB hub found
Feb 17 20:45:50 localhost kernel: hub.c: 2 ports detected
Feb 17 20:45:50 localhost kernel: usb-uhci.c: USB UHCI at I/O 0xef80, IRQ 9
Feb 17 20:45:50 localhost kernel: usb-uhci.c: Detected 2 ports
Feb 17 20:45:50 localhost kernel: usb.c: new USB bus registered,
assigned bus number 2
Feb 17 20:45:50 localhost kernel: hub.c: USB hub found
Feb 17 20:45:50 localhost kernel: hub.c: 2 ports detected
Feb 17 20:45:50 localhost kernel: usb-uhci.c: v1.275:USB Universal Host
Controller Interface driver
Feb 17 20:45:50 localhost kernel: usb.c: registered new driver hiddev
Feb 17 20:45:50 localhost kernel: usb.c: registered new driver hid
Feb 17 20:45:50 localhost kernel: hid-core.c: v1.8.1 Andreas Gal,
Vojtech Pavlik <vojtech@suse.cz>
Feb 17 20:45:50 localhost kernel: hid-core.c: USB HID support drivers
Feb 17 20:45:50 localhost kernel: mice: PS/2 mouse device common for all
mice
Feb 17 20:45:50 localhost kernel: hub.c: new USB device 00:1f.2-2,
assigned address 2
Feb 17 20:45:50 localhost kernel: usb.c: USB device 2 (vend/prod
0x3f0/0x104) is not claimed by any active driver.
Feb 17 20:45:50 localhost kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on
ide0(3,3), internal journal
Feb 17 20:45:50 localhost kernel: Adding Swap: 1044184k swap-space
(priority -1)
Feb 17 20:45:50 localhost kernel: hub.c: new USB device 00:1f.4-2,
assigned address 2
Feb 17 20:45:50 localhost kernel: usb.c: USB device 2 (vend/prod
0x763/0x1031) is not claimed by any active driver.
Feb 17 20:45:50 localhost kernel: usb.c: registered new driver usblp
Feb 17 20:45:50 localhost kernel: printer.c: Disabling reads from
problem bidirectional printer on usblp0
Feb 17 20:45:50 localhost kernel: printer.c: usblp0: USB Unidirectional
printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0104
Feb 17 20:45:50 localhost kernel: printer.c: v0.11: USB Printer Device
Class driver
Feb 17 20:45:50 localhost kernel: kjournald starting. Commit interval 5
seconds
Feb 17 20:45:50 localhost kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on
ide0(3,2), internal journal
Feb 17 20:45:50 localhost kernel: EXT3-fs: mounted filesystem with
ordered data mode.
Feb 17 20:45:50 localhost kernel: SCSI subsystem driver Revision: 1.00
Feb 17 20:45:50 localhost kernel: hdc: attached ide-scsi driver.
Feb 17 20:45:50 localhost kernel: hdd: attached ide-scsi driver.
Feb 17 20:45:50 localhost kernel: scsi0 : SCSI host adapter emulation
for IDE ATAPI devices
Feb 17 20:45:51 localhost kernel: Vendor: HP Model: CD-Writer+
9500 Rev: 1.0e
Feb 17 20:45:51 localhost kernel: Type:
CD-ROM ANSI SCSI revision: 02
Feb 17 20:45:51 localhost kernel: Vendor: LG Model: DVD-ROM
DRD8160B Rev: 1.01
Feb 17 20:45:51 localhost kernel: Type:
CD-ROM ANSI SCSI revision: 02
Feb 17 20:45:51 localhost kernel: IA-32 Microcode Update Driver: v1.11
<tigran@veritas.com>
Feb 17 20:45:51 localhost kernel: microcode: CPU0 already at revision 8
(current=8)
Feb 17 20:45:51 localhost kernel: microcode: freed 2048 bytes
Feb 17 20:45:51 localhost sendmail: sendmail startup succeeded
Feb 17 20:45:51 localhost kernel: parport0: PC-style at 0x378
[PCSPP,TRISTATE,EPP]
Feb 17 20:45:51 localhost kernel: Attached scsi CD-ROM sr0 at scsi0,
channel 0, id 0, lun 0
Feb 17 20:45:51 localhost kernel: Attached scsi CD-ROM sr1 at scsi0,
channel 0, id 1, lun 0
Feb 17 20:45:51 localhost kernel: sr0: scsi3-mmc drive: 32x/32x writer
cd/rw xa/form2 cdda tray
Feb 17 20:45:51 localhost kernel: Uniform CD-ROM driver Revision: 3.12
Feb 17 20:45:51 localhost kernel: sr1: scsi3-mmc drive: 0x/48x cd/rw
xa/form2 cdda tray
Feb 17 20:45:51 localhost kernel: ip_tables: (C) 2000-2002 Netfilter
core team
Feb 17 20:45:51 localhost sendmail: sm-client startup succeeded
Feb 17 20:45:51 localhost gpm: gpm startup succeeded
Feb 17 20:45:51 localhost modprobe: Warning: ignoring device_mode=0666,
no such parameter in this module
Feb 17 20:45:51 localhost modprobe: Module snd loaded, with warnings
Feb 17 20:45:51 localhost modprobe: Module snd-hwdep loaded, with warnings
Feb 17 20:45:51 localhost modprobe: Module snd-seq-device loaded, with
warnings
Feb 17 20:45:51 localhost modprobe: Module snd-util-mem loaded, with
warnings
Feb 17 20:45:51 localhost modprobe: Module snd-ac97-codec loaded, with
warnings
Feb 17 20:45:51 localhost modprobe: Module snd-rawmidi loaded, with warnings
Feb 17 20:45:51 localhost modprobe: Module snd-page-alloc loaded, with
warnings
Feb 17 20:45:51 localhost modprobe: Module snd-timer loaded, with warnings
Feb 17 20:45:51 localhost modprobe: Module snd-pcm loaded, with warnings
Feb 17 20:45:51 localhost modprobe: Module snd-emu10k1 loaded, with warnings
Feb 17 20:45:51 localhost alsasound: Starting sound driver snd-emu10k1
succeeded
Feb 17 20:45:51 localhost kernel: usb.c: registered new driver snd-usb-audio
Feb 17 20:45:51 localhost alsasound: Starting sound driver snd-usb-audio
succeeded
Feb 17 20:45:52 localhost alsasound: Starting sequencer succeeded
Feb 17 20:45:52 localhost alsasound: Starting sequencer driver
snd-emu10k1-synth succeeded
Feb 17 20:45:52 localhost alsasound: Restoring sound driver settings
succeeded
Feb 17 20:45:53 localhost canna: succeeded
Feb 17 20:45:53 localhost crond: crond startup succeeded
Feb 17 20:45:56 localhost kernel: parport0: PC-style at 0x378
[PCSPP,TRISTATE,EPP]
Feb 17 20:45:57 localhost kernel: lp0: using parport0 (polling).
Feb 17 20:45:57 localhost kernel: lp0: console ready
Feb 17 20:45:57 localhost modprobe: modprobe: Can't locate module
char-major-188
Feb 17 20:45:57 localhost last message repeated 15 times
Feb 17 20:45:58 localhost cups: cupsd startup succeeded
Feb 17 20:46:00 localhost xfs: xfs startup succeeded
Feb 17 20:46:00 localhost anacron: anacron startup succeeded
Feb 17 20:46:00 localhost rc: Starting css: succeeded
Feb 17 20:46:03 localhost modprobe: modprobe: Can't locate module
char-major-10-134
Feb 17 20:46:04 localhost kernel: Linux agpgart interface v0.99 (c) Jeff
Hartmann
Feb 17 20:46:04 localhost kernel: agpgart: Maximum main memory to use
for agp memory: 438M
Feb 17 20:46:04 localhost kernel: agpgart: agpgart: Detected an Intel
i815 Chipset.
Feb 17 20:46:04 localhost kernel: agpgart: AGP aperture is 64M @ 0xf8000000
Feb 17 20:46:04 localhost modprobe: modprobe: Can't locate module
char-major-226
Feb 17 20:46:04 localhost last message repeated 3 times
Feb 17 20:46:04 localhost kernel: [drm] AGP 0.99 Aperture @ 0xf8000000 64MB
Feb 17 20:46:04 localhost kernel: [drm] Initialized i810 1.2.1 20020211
on minor 0
Feb 17 20:46:22 localhost gdm(pam_unix)[1475]: session opened for user
mikes by (uid=0)
Feb 17 20:46:44 localhost modprobe: modprobe: Can't locate module
sound-slot-2
Feb 17 20:46:44 localhost modprobe: modprobe: Can't locate module
sound-service-2-0
Feb 17 20:46:44 localhost modprobe: modprobe: Can't locate module
sound-slot-2
Feb 17 20:46:44 localhost modprobe: modprobe: Can't locate module
sound-service-2-0
Feb 17 20:46:44 localhost modprobe: modprobe: Can't locate module
sound-slot-3
Feb 17 20:46:44 localhost modprobe: modprobe: Can't locate module
sound-service-3-0
Feb 17 20:46:44 localhost modprobe: modprobe: Can't locate module
sound-slot-3
Feb 17 20:46:44 localhost modprobe: modprobe: Can't locate module
sound-service-3-0
Feb 17 20:49:25 localhost modprobe: modprobe: Can't locate module ppp0
Feb 17 20:49:25 localhost modprobe: modprobe: Can't locate module ppp0
Feb 17 20:49:25 localhost kernel: CSLIP: code copyright 1989 Regents of
the University of California
Feb 17 20:49:25 localhost kernel: PPP generic driver version 2.4.2
Feb 17 20:49:25 localhost pppd[1706]: pppd 2.4.1 started by root, uid 0
Feb 17 20:49:25 localhost modprobe: modprobe: Can't locate module ppp0
Feb 17 20:49:25 localhost pppd[1706]: Using interface ppp0
Feb 17 20:49:25 localhost pppd[1706]: Connect: ppp0 <--> /dev/ttyS4
Feb 17 20:49:25 localhost /etc/hotplug/net.agent: assuming ppp0 is
already up
Feb 17 20:49:28 localhost modprobe: modprobe: Can't locate module
ppp-compress-21
Feb 17 20:49:28 localhost kernel: PPP Deflate Compression module registered
Feb 17 20:49:28 localhost modprobe: modprobe: Can't locate module
ppp-compress-21
Feb 17 20:49:29 localhost pppd[1706]: local IP address ***.***.***.***
Feb 17 20:49:29 localhost pppd[1706]: remote IP address ***.***.***.***
Feb 17 20:49:29 localhost pppd[1706]: primary DNS address ***.***.***.***
Feb 17 20:49:29 localhost pppd[1706]: secondary DNS address ***.***.***.***
Feb 17 20:51:28 localhost su(pam_unix)[1793]: session opened for user
root by mikes(uid=500)
@@@ For dmesg, I have: (see below) Take note of "usb.c: registered new
driver snd-usb-audio" located 14th from the bottom....
Linux version 2.4.24-1.ll.rh90.ccrmasmp (root@cmn19.Stanford.EDU) (gcc
version 3
.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 SMP Mon Jan 5 13:48:52 PST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fec0000 (usable)
BIOS-e820: 000000001fec0000 - 000000001fef8000 (ACPI data)
BIOS-e820: 000000001fef8000 - 000000001ff00000 (ACPI NVS)
BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
510MB LOWMEM available.
ACPI: have wakeup address 0xc0002000
On node 0 totalpages: 130752
zone(0): 4096 pages.
zone(1): 126656 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 AMI ) @ 0x000ff980
ACPI: RSDT (v001 D815EA D815EEA2 0x20021106 MSFT 0x00001011) @ 0x1fef0000
ACPI: FADT (v001 D815EA EA81510A 0x20021106 MSFT 0x00001011) @ 0x1fef1000
ACPI: DSDT (v001 D815E2 EA81520A 0x00000023 MSFT 0x0100000b) @ 0x00000000
Kernel command line: ro root=LABEL=/ hdc=ide-scsi hdd=ide-scsi
ide_setup: hdc=ide-scsi
ide_setup: hdd=ide-scsi
Found and enabled local APIC!
Initializing CPU#0
Detected 994.630 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1966.08 BogoMIPS
Memory: 513248k/523008k available (1687k kernel code, 9372k reserved,
585k data,
208k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
CPU0: Intel Pentium III (Coppermine) stepping 06
per-CPU timeslice cutoff: 731.65 usecs.
SMP motherboard not detected.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 994.0349 MHz.
..... host bus clock speed is 132.0579 MHz.
cpu: 0, clocks: 132579, slice: 66289
CPU0<T0:132576,T1:66272,D:15,S:66289,C:132579>
Waiting on wait_init_idle (map = 0x0)
All processors have done init_idle
ACPI: Subsystem revision 20031002
PCI: PCI BIOS revision 2.10 entry at 0xfda95, last bus=1
PCI: Using configuration type 1
ACPI: IRQ9 SCI: Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12)
PCI: Probing PCI hardware
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 9
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even
'acpi=off
'
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
apm: overridden by ACPI.
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU1] (supports C1)
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT
SHARE_IRQ SER
IAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Redundant entry in serial pci_table. Please send the output of
lspci -vv, this message (12b9,1008,12b9,00d7)
and the manufacturer and name of serial board or modem board
to serial-pci-info@lists.sourceforge.net.
ttyS04 at port 0xdfe0 (irq = 11) is a 16550A
Real Time Clock Driver v1.10e
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2: IDE controller at PCI slot 00:1f.1
ICH2: chipset revision 2
ICH2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
hda: Maxtor 5T060H6, ATA DISK drive
blk: queue c03d5740, I/O limit 4095Mb (mask 0xffffffff)
hdc: Hewlett-Packard CD-Writer Plus 9500, ATAPI CD/DVD-ROM drive
hdd: LG DVD-ROM DRD-8160B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 120103200 sectors (61493 MB) w/2048KiB Cache, CHS=7476/255/63,
UDMA(100)
Partition check:
hda: hda1 hda2 hda3 hda4 < hda5 >
ide: late registration of driver.
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 151k freed
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 208k freed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 14:04:23 Jan 5 2004
usb-uhci.c: High bandwidth mode enabled
PCI: Setting latency timer of device 00:1f.2 to 64
usb-uhci.c: USB UHCI at I/O 0xef40, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1f.4 to 64
usb-uhci.c: USB UHCI at I/O 0xef80, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
hub.c: new USB device 00:1f.2-2, assigned address 2
usb.c: USB device 2 (vend/prod 0x3f0/0x104) is not claimed by any active
driver.
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal
Adding Swap: 1044184k swap-space (priority -1)
hub.c: new USB device 00:1f.4-2, assigned address 2
usb.c: USB device 2 (vend/prod 0x763/0x1031) is not claimed by any
active driver
.
usb.c: registered new driver usblp
printer.c: Disabling reads from problem bidirectional printer on usblp0
printer.c: usblp0: USB Unidirectional printer dev 2 if 0 alt 1 proto 2
vid 0x03F
0 pid 0x0104
printer.c: v0.11: USB Printer Device Class driver
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SCSI subsystem driver Revision: 1.00
hdc: attached ide-scsi driver.
hdd: attached ide-scsi driver.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: HP Model: CD-Writer+ 9500 Rev: 1.0e
Type: CD-ROM ANSI SCSI revision: 02
Vendor: LG Model: DVD-ROM DRD8160B Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 02
IA-32 Microcode Update Driver: v1.11 <tigran@veritas.com>
microcode: CPU0 already at revision 8 (current=8)
microcode: freed 2048 bytes
parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Attached scsi CD-ROM sr1 at scsi0, channel 0, id 1, lun 0
sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
sr1: scsi3-mmc drive: 0x/48x cd/rw xa/form2 cdda tray
ip_tables: (C) 2000-2002 Netfilter core team
usb.c: registered new driver snd-usb-audio
parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
lp0: using parport0 (polling).
lp0: console ready
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 438M
agpgart: agpgart: Detected an Intel i815 Chipset.
agpgart: AGP aperture is 64M @ 0xf8000000
[drm] AGP 0.99 Aperture @ 0xf8000000 64MB
[drm] Initialized i810 1.2.1 20020211 on minor 0
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
divert: not allocating divert_blk for non-ethernet device ppp0
PPP Deflate Compression module registered