[PlanetCCRMA] Reordering Sound Cards

[Janina Sajka]

Mark Knecht writes:
> Hi,
>    I think you want something like:
> 
> alias snd-card-0 snd-CARD_0
> options snd-CARD_0 index=0 
> alias snd-card-1 snd-CARD_1
> options snd-CARD_1 index=1 
> 
> I don't have this set up right now but I've used it in the past with 2
> audio cards and a USB MIDI interface where I wanted to know that each
> time I booted I'd always get the cards in a known order.
> 


Yes, that's exactly what I did in /etc/modprobe.conf, but it doesn't
appear to be enough.

Running aplay [file.wav] gives me:

ALSA lib conf.c:1578:(snd_config_load1) _toplevel_:51:23:No such file or
directory
ALSA lib conf.c:2823:(snd_config_hook_load) /etc/alsa/cards/aliases.conf
may be old or corrupted: consider to remove or fix it
ALSA lib conf.c:2686:(snd_config_hooks_call) function
snd_config_hook_load returned error: No such file or directory
ALSA lib pcm.c:1959:(snd_pcm_open_conf) Invalid type for PCM default
definition (id: default, value: cards.pcm.default)
aplay: main:533: audio open error: Invalid argument

Whereas 'apaly -D hw:0,0' works like a charm. So, not sure where the
"invalid argument' is housed.


As you suggest, I've already switched things around in my
/etc/modprobe.conf as follows. The card/index number are as I want them.
The install had them reversed from this:

alias snd-card-0 snd-intel8x0
options snd-card-0 index=0
options snd-intel8x0 index=0
remove snd-intel8x0 { /usr/sbin/alsactl store 1 >/dev/null 2>&1 || : ;
}; /sbin/modprobe -r --ignore-remove snd-intel8x0
options snd-hdsp index=1
remove snd-hdsp { /usr/sbin/alsactl store 0 >/dev/null 2>&1 || : ; };
/sbin/modprobe -r --ignore-remove snd-hdsp


> Hope this helps,
> Mark
> 
> On 7/6/05, Janina Sajka <janina@rednote.net> wrote:
> > Can anyone advise on how best to rearrange the order of multiple sound
> > cards in an FC4 system?
> > 
> > I am trying to setup a pretty snappy P4 box for audio work. It has an on
> > board Intel 8X0 and I've plopped my HDSP Multiface's PCI interface card
> > inside. The FC4 installation set the HDSP up as card 0, and the onboard
> > Intel as card 1. Well, that's the opposite of what I want, but just
> > switching the designations in /etc/modprobe.conf doesn't do the trick.
> > 
> > I can successfully:
> > 
> > aplay -D hw:0,0
> > 
> > to play to the Intel. But aplay all alone just gives me an error.
> > 
> > My reasoning for keeping the 8X0 in the systemis to have it grab all the audio by default, such as
> > my software TTS speech interface on the GUI, etc. In particular I would
> > not want my screen reader audio events intermixed with my
> > compositions/performances.
> > 
> > Should I physically move my HDSP PCI interface to another slot and run
> > Kudzu? What's the best way to get Fedora to reorder these devices?
> > 
> > Thanks in advance for all advice on this.
> > 
> > 
> > 
> > Chair, Accessibility Workgroup          Free Standards Group (FSG)
> > janina@freestandards.org                http://a11y.org
> > 
> > Janina Sajka                            Phone: +1.202.494.7040
> > Partner, Capital Accessibility LLC      http://www.CapitalAccessibility.Com
> > 
> > Bringing the Owasys 22C screenless cell phone to the U.S. and Canada. Go to http://www.ScreenlessPhone.Com to learn more.
> > 
> > _______________________________________________
> > PlanetCCRMA mailing list
> > PlanetCCRMA@ccrma.stanford.edu
> > http://ccrma-mail.stanford.edu/mailman/listinfo/planetccrma
> >

-- 

Chair, Accessibility Workgroup		Free Standards Group (FSG)
janina@freestandards.org		http://a11y.org

Janina Sajka				Phone: +1.202.494.7040
Partner, Capital Accessibility LLC	http://www.CapitalAccessibility.Com

Bringing the Owasys 22C screenless cell phone to the U.S. and Canada. Go to http://www.ScreenlessPhone.Com to learn more.