[PlanetCCRMA] Problem starting Ardour

[jim ruxton]

Thanks again Mark. I'm using qjackctl .
Jim
> Or any kernel that supplies capabilities. How are you starting Jack?
> Command line or QJC?
> 
> On 6/28/05, jim ruxton <cinetron@passport.ca> wrote:
> > Thank you Mark. This worked! I guess to use realtime I would need the
> > planet Kernel?
> > Jim
> > > Hi Jim,
> > >
> > > 1) Turn of 'realtime' capabilities in Jack.
> > > 2) Make sure you are running Jack and Ardour as the same user.
> > >
> > > Good luck,
> > > Mark
> > >
> > > On 6/27/05, jim ruxton <cinetron@passport.ca> wrote:
> > > > Any ideas where I should start in trying to get Ardour to work? Output
> > > > when I start Ardour is below. I'm not using the planet kernel yet. I
> > > > have wireless on my machine that requires ndiswrapper so use a kernel
> > > > from here http://www.linuxant.com/driverloader/wlan/full/downloads-fc3-
> > > > kernel-i686.php  . Below is the Ardour output. Thanks!
> > > > Jim
> > > > Ardour/GTK 0.9beta29
> > > >    (built using 0.589.2 with libardour 0.887.1)
> > > > Copyright (C) 1999-2005 Paul Davis
> > > > Some portions Copyright (C) Steve Harris, Ari Johnson, Brett Viren, Joel
> > > > Baker
> > > > Ardour comes with ABSOLUTELY NO WARRANTY
> > > > not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
> > > > This is free software, and you are welcome to redistribute it
> > > > under certain conditions; see the source for copying conditions.
> > > > Loading UI configuration file /etc/ardour/ardour_ui.rc
> > > > jackstart: cannot get realtime capabilities, current capabilities are:
> > > >            =ep cap_setpcap-ep
> > > >     probably running under a kernel with capabilities disabled,
> > > >     a suitable kernel would have printed something like "=eip"
> > > >
> > > > back from read, ret = 1 errno == Success
> > > > jackstart: could not give capabilities: Operation not permitted
> > > > jackd 0.99.36
> > > > Copyright 2001-2003 Paul Davis and others.
> > > > jackd comes with ABSOLUTELY NO WARRANTY
> > > > This is free software, and you are welcome to redistribute it
> > > > under certain conditions; see the file COPYING for details
> > > >
> > > > JACK compiled with System V SHM support.
> > > > cannot lock down memory for jackd (Cannot allocate memory)
> > > > loading driver ..
> > > > creating alsa driver ... hw:0|hw:0|512|2|48000|0|0|nomon|swmeter|-|32bit
> > > > control device hw:0
> > > > configuring for 48000Hz, period = 512 frames, buffer = 2 periods
> > > > Couldn't open hw:0 for 32bit samples trying 24bit instead
> > > > Couldn't open hw:0 for 24bit samples trying 16bit instead
> > > > nperiods = 2 for capture
> > > > nperiods = 2 for playback
> > > > JACK: unable to mlock() port buffers: Cannot allocate memory
> > > > jack_create_thread: error -1 switching current thread to rt for
> > > > inheritance: Unknown error 4294967295
> > > > cannot start watchdog thread
> > > > cannot load driver module alsa
> > > > ardour: [ERROR]: Unable to connect to JACK server
> > > > ardour: [ERROR]: Could not connect to JACK server as  "ardour"
> > > > ardour: [ERROR]: Could not connect to JACK server as  "ardour"
> > > >
> > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > PlanetCCRMA mailing list
> > > > PlanetCCRMA@ccrma.stanford.edu
> > > > http://ccrma-mail.stanford.edu/mailman/listinfo/planetccrma
> > > >
> > >
> > 
> >
>