[PlanetCCRMA] FC3, ALSA and Noteedit; scheduler issue

[Nick Metrowsky]

Hi Folks,

I am running FC3 and I installed everything from the FC3 CDs, as well 
as, Planet CCRMA. I am running the stock FC3 kernel, because my laptop 
internal wireless requires ndiswrapper, which is not happy with the 
Planet CCRMA low-level kernel. Under either kernel, I still have the 
same problem I am about to describe.

When I start up noteedit, and some other applications, I get the 
following error:

kbuildsycoca running...
Reusing existing ksycoca
LilyPond check: found version: 2.4.5
WITHOUT semicolons.
WITH wavelines (for trills)
WITH slures in graces
NOTE LENGTHs after chords
"\property" keyword does not exist
cannot create an ALSA MIDI Scheduler
cannot create an OSS MIDI Scheduler
error opening Midi Device --> music cannot be played
TSE3 Copyright information :(c) Pete Goodliffe, 2000-2002. A Trax 
Software Product. Version: 0.2.7
QCheckBox::setProperty( "Checked", value ) failed: property invalid, 
read-only or does not exist

I have tried changing the noteedit configuration, and whatever I try I 
still get a message stating that it cannot create a scheduler OSS or ALSA.

My /etc/modprobe.conf contains:

alias eth0 8139too
alias usb-controller ehci-hcd
alias usb-controller1 uhci-hcd
alias ieee1394-controller ohci1394
alias wlan0 ndiswrapper
alias char-major-116-* snd
alias char-major-14-* soundcore
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
alias snd-card-0 snd-intel8x0
install sound-slot-0 /sbin/modprobe --first-time --ignore-install 
sound-slot-0 &&  { /bin/aumix-minimal -f /etc/.aumixrc -L >/dev/null 
2>&1 || :; }
remove sound-slot-0 { /bin/aumix-minimal -f /etc/.aumixrc -S >/dev/null 
2>&1 || :; } ;  /sbin/modprobe -r --first-time --ignore-remove sound-slot-0

ls -al /dev/snd gives:

drwxr-xr-x  2 root   root     220 May 12 13:37 .
drwxr-xr-x  9 root   root    6100 May 13 17:27 ..
crw-------  1 nmetro root 116,  0 May 12 13:36 controlC0
crw-------  1 nmetro root 116, 24 May 12 13:36 pcmC0D0c
crw-------  1 nmetro root 116, 16 May 12 13:36 pcmC0D0p
crw-------  1 nmetro root 116, 25 May 12 13:36 pcmC0D1c
crw-------  1 nmetro root 116, 26 May 12 13:36 pcmC0D2c
crw-------  1 nmetro root 116, 27 May 12 13:36 pcmC0D3c
crw-------  1 nmetro root 116, 20 May 12 13:36 pcmC0D4p
crw-------  1 nmetro root 116,  1 May 12 13:37 seq
crw-------  1 nmetro root 116, 33 May 12 13:36 timer

ls -al /dev/dsp gives:

crw-------  1 nmetro root 14, 3 May 12 13:36 /dev/dsp

Is there something I forgot to do? Also, when I run applications with 
Flashplayer, the sound is "scratchy", but everything else the sound is 
perfect.

Any ideas would be most welcome.

Take care!

Nick


-- 
========================================================================
Nick Metrowsky                   | http://users.frii.com/~nmetro/
3624 Oakwood Drive               | E-Mail: nmetro@frii.com
Longmont, CO 80503-7560          | Phone: (303)485-5696
========================================================================