[PlanetCCRMA] frustrated with midi - finding no help

[David Slimp]

Thanks,

I have tried that.

Here are some outputs, but even with this, muse/rosegarden give same error

$  cat /proc/asound/cards
0 [M1010LT        ]: ICE1712 - M Audio Delta 1010LT
                     M Audio Delta 1010LT at 0xb800, irq 19
1 [VirMIDI        ]: VirMIDI - VirMIDI
                     Virtual MIDI Card 1


$  cat /proc/modules | egrep -i "midi|401"
snd_virmidi 4544 8 - Live 0xe0b19000
snd_seq_virmidi 8320 10 snd_virmidi, Live 0xe0b15000
snd_seq_midi 10400 3 - Live 0xe09db000
snd_seq_midi_event 8704 2 snd_seq_virmidi,snd_seq_midi, Live 0xe09d1000
snd_seq 61456 35
snd_seq_virmidi,snd_seq_dummy,snd_seq_midi,snd_seq_midi_event, Live
0xe09fc000
snd_mpu401_uart 8704 1 snd_ice1712, Live 0xe082c000
snd_rawmidi 27936 3 snd_seq_virmidi,snd_seq_midi,snd_mpu401_uart, Live
0xe085d000
snd_seq_device 9612 4 snd_seq_dummy,snd_seq_midi,snd_seq,snd_rawmidi,
Live 0xe0823000
snd 69636 29 snd_virmidi,snd_seq_virmidi,snd_seq_dummy,snd_seq_midi,snd_seq_midi_event,snd_seq,snd_ice1712,snd_ice17xx_ak4xxx,snd_ak4xxx_adda,snd_cs8427,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_i2c,snd_mpu401_uart,snd_rawmidi,snd_seq_device,
Live 0xe084a000



... what ELSE is there to look at that I MUST be missing?
Who would know about these things?  -- at a lower level ?

Thanks,
david



On 2/13/06, Gregory Maxwell <gmaxwell@gmail.com> wrote:
> try
> modprobe snd-seq-virmidi
>
> It's just a guess.. I've not had this problem and I use midi all the time.
>
>
> On 2/13/06, David Slimp <rock808@gmail.com> wrote:
> > Well, it's been 4 days or so, since I posted my last message about midi
> > problems (2 weeks since my first).  I've also posted on CCRMA forum
> > and rosegarden forum with no adequate response from anyone on
> > either list.  I've googled and read every page I could find,
> > and now I'm out of options.
> >
> > I'm still having problems getting the midi sequencer to work.
> > I'm now working with a Delta 1010LT card running FC3/CCRMA,
> > so know this should be working.
> >
> > I can see midi drivers in lsmod and can play them using fluidsynth,
> > but I cannot start qsynth, muse, or rosegarden because they all
> > report THIS error:
> >
> > ALSA lib seq.c:928:(snd_seq_open_noupdate) Unknown SEQ hw
> > Could not open ALSA sequencer: No such file or directory
> >
> >
> > Since no one here seems to be able to help,
> > where do I turn next?
> >
> > thanks,
> > david