[PlanetCCRMA] sndcard now lost when booting ccrma kernel in FC2
nigel henry
cave.dnb@tiscali.fr
Wed Mar 8 10:41:00 2006
--Boundary-00=_wTyDE3eP9HRYzCZ
Content-Type: text/plain;
charset="us-ascii"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
Hi Folks. The installed kernels were.
2.6.5-8 the original redhat one (alsa never worked with that)
2.6.10-2.1.ll.rhfc2.ccrma , and kernel-module-alsa package
2.6.10-0.4.rdt.rhfc2.ccrma , and kernel-module-alsa package
2.6.10-0.6.rdt.rhfc2.ccrma (this didn't boot but was still installed)
Alsa worked just fine with the other 2 kernels. Then. I decided to get rid of
2-6-10-0.6. At the same time Iooking for later kernels. I removed 2.6.10-0.6
and installed 2.6.11-0.3.rdt.rhfc2.ccrma, and the kernel-module-alsa package
for it. I don't think I rebooted to try it, as I was only tidying stuff up.
The only other thing I've installed lately, apart from fedora-legacy updates,
was Rezound, which also picked up Fox, and Soundtouch.
Next time I booted up into 2.6.10-0.4 the sounds have gone. Then tried
2.6.11-0.3, the newly installed one, but still no sounds. Then removed
Rezound, Fox, and Soundtouch, just in case. No Change. Then tried
2.6.10-2.1.ll.rhfc2.ccrma. This one worked ok, and Alsa loaded ok, and the
sounds work. Strangely though, cat /proc/asound/version showed it was using
Alsa driver 1.0.8, but synaptic showed the version installed was 1.0.9rc1.
Having just tried that kernel again to check on the 1.0.8 version, it's now
showing 1.0.9rc1.
Then removed 2.6.11-0.3, and the kernel-module-alsa package, in case that was
causing problems, but no change when booting 2.6.10-0.4. Still no sounds.
Then removed 2.6.10-0.4, and kernel-module-alsa package. Then ran.
apt-get planetccrma-core-edge, which installed 2.6.11-0.3 from my local
archive, and the kernel-module-alsa package. Still no sounds.
Below is some info while running 2.6.11-0.3.rdt.rhfc2.ccrma.
djmons@localhost djmons]$ cat /proc/asound/cards
--- no soundcards ---
[djmons@localhost djmons]$ cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.9rc1.
Compiled on Mar 22 2005 for kernel 2.6.11-0.3.rdt.rhfc2.ccrma.
[djmons@localhost djmons]$ cat /proc/asound/devices
1: : sequencer
33: : timer
[djmons@localhost djmons]$
[djmons@localhost djmons]$ /sbin/lsmod
Module Size Used by
snd_pcm_oss 61984 0
snd_mixer_oss 21376 1 snd_pcm_oss
snd_seq 60048 0
snd_ac97_codec 78456 0
snd_util_mem 5632 0
snd_hwdep 10528 0
realtime 5256 0
commoncap 6912 1 realtime
parport_pc 27332 1
lp 12104 0
parport 35912 2 parport_pc,lp
autofs4 19844 0
8139too 25472 0
mii 4864 1 8139too
ipt_REJECT 7040 1
ipt_state 1920 1
ip_conntrack 44472 1 ipt_state
iptable_filter 2944 1
ip_tables 22912 3 ipt_REJECT,ipt_state,iptable_filter
floppy 58448 0
sg 38816 0
scsi_mod 129736 1 sg
microcode 6688 0
vfat 13568 1
fat 39964 1 vfat
dm_mod 60028 0
usb_midi 24324 0
snd_pcm 105608 2 snd_pcm_oss,snd_ac97_codec
snd_timer 27524 2 snd_seq,snd_pcm
snd_page_alloc 10756 1 snd_pcm
snd_usb_lib 16384 0
snd_rawmidi 27424 1 snd_usb_lib
snd_seq_device 9612 2 snd_seq,snd_rawmidi
snd 68228 11
snd_pcm_oss,snd_mixer_oss,snd_seq,snd_ac97_codec,snd_util_mem,snd_hwdep,snd_pcm,snd_timer,snd_usb_lib,snd_rawmidi,snd_seq_device
soundcore 9824 2 usb_midi,snd
uhci_hcd 31632 0
video 15620 0
container 4352 0
button 6416 0
battery 9220 0
ac 4740 0
md5 4224 1
ipv6 259488 10
ext3 135816 2
jbd 65944 1 ext3
[djmons@localhost djmons]$
Output from running /usr/sbin/alsaconf.
this detects the souncard (emu10k1 Creative Labs SB Audigy (rev 04) ok.
Can't capture the output, but after alsaconf finishes, running.
/etc/rc.d/init.d/alsasound start, gives the following.
# /etc/rc.d/init.d/alsasound start
ALSA driver already running
Starting sound driver snd-emu10k1 [ OK ]
Starting sound driver snd-usb-audio FATAL: Error inserting snd_usb_audio
(/lib/modules/2.6.11-0.3.rdt.rhfc2.ccrma/updates/usb/snd-usb-audio.ko):
Unknown symbol in module, or unknown parameter (see dmesg)
[FAILED]
Starting sound driver snd-emu10k1 [ OK ]
Starting sequencer [ OK ]
Restoring sound driver settings /usr/sbin/alsactl: load_state:1272: No
soundcards found...
[FAILED]
[root@localhost djmons]#
2 bootlogs from /var/log/bootlog. The first for kernel
2.6.10-2.1.ll.rhfc2.ccrma, and the second for. 2.6.11-0.3.rdt.rhfc2.ccrma,
which has all the problems, and equally applies to
2.6.10-0.4.rdt.rhfc2.ccrma, which was working ok before these recent
problems.
This log is for kernel-2.6.10-2.1.ll.rhfc2.ccrma, and as can be seen, loads
the Alsa stuff ok.
Mar 8 01:59:27 localhost syslog: syslogd startup succeeded
Mar 8 01:59:27 localhost syslog: klogd startup succeeded
Mar 8 01:59:28 localhost irqbalance: irqbalance startup succeeded
Mar 8 01:59:28 localhost random: Initializing random number generator:
succeeded
Mar 8 01:59:28 localhost autofs: automount startup succeeded
Mar 8 01:59:29 localhost smartd: smartd startup succeeded
Mar 8 01:59:29 localhost acpid: acpid startup succeeded
Mar 8 01:58:56 localhost rc.sysinit: -e
Mar 8 01:58:56 localhost sysctl: net.ipv4.ip_forward = 0
Mar 8 01:58:56 localhost sysctl: net.ipv4.conf.default.rp_filter = 1
Mar 8 01:58:56 localhost sysctl: kernel.sysrq = 0
Mar 8 01:58:56 localhost sysctl: kernel.core_uses_pid = 1
Mar 8 01:58:56 localhost rc.sysinit: Configuring kernel parameters:
succeeded
Mar 8 01:58:56 localhost date: Wed Mar 8 01:58:48 CET 2006
Mar 8 01:58:56 localhost rc.sysinit: Setting clock (localtime): Wed Mar 8
01:58:48 CET 2006 succeeded
Mar 8 01:58:56 localhost rc.sysinit: Loading default keymap succeeded
Mar 8 01:58:56 localhost rc.sysinit: Setting hostname localhost.localdomain:
succeeded
Mar 8 01:58:56 localhost rc.sysinit: Initializing USB controller (uhci-hcd):
succeeded
Mar 8 01:58:56 localhost rc.sysinit: Mounting USB filesystem: succeeded
Mar 8 01:58:56 localhost fsck: /: clean, 241991/1154176 files,
1300724/2304028 blocks
Mar 8 01:58:56 localhost rc.sysinit: Checking root filesystem succeeded
Mar 8 01:58:56 localhost rc.sysinit: Remounting root filesystem in read-write
mode: succeeded
Mar 8 01:59:35 localhost cups: cupsd startup succeeded
Mar 8 01:58:59 localhost rc.sysinit: Activating swap partitions: succeeded
Mar 8 01:59:04 localhost fsck: /home: clean, 30221/2741760 files,
2003004/5478354 blocks
Mar 8 01:59:04 localhost rc.sysinit: Checking filesystems succeeded
Mar 8 01:59:05 localhost rc.sysinit: Mounting local filesystems: succeeded
Mar 8 01:59:36 localhost sshd: succeeded
Mar 8 01:59:05 localhost rc.sysinit: Enabling local filesystem quotas:
succeeded
Mar 8 01:59:06 localhost rc.sysinit: Enabling swap space: succeeded
Mar 8 01:59:07 localhost microcode_ctl: microcode_ctl startup succeeded
Mar 8 01:59:07 localhost readahead_early: Starting background readahead:
Mar 8 01:59:36 localhost xinetd: xinetd startup succeeded
Mar 8 01:59:08 localhost rc: Starting readahead_early: succeeded
Mar 8 01:59:20 localhost kudzu: succeeded
Mar 8 01:59:23 localhost kudzu: Updating /etc/fstab succeeded
Mar 8 01:59:23 localhost iptables: succeeded
Mar 8 01:59:39 localhost rtload: succeeded
Mar 8 01:59:23 localhost sysctl: net.ipv4.ip_forward = 0
Mar 8 01:59:23 localhost sysctl: net.ipv4.conf.default.rp_filter = 1
Mar 8 01:59:23 localhost sysctl: kernel.sysrq = 0
Mar 8 01:59:23 localhost sysctl: kernel.core_uses_pid = 1
Mar 8 01:59:23 localhost network: Setting network parameters: succeeded
Mar 8 01:59:24 localhost network: Bringing up loopback interface: succeeded
Mar 8 01:59:27 localhost network: Bringing up interface eth0: succeeded
Mar 8 01:59:39 localhost ntpd: succeeded
Mar 8 01:59:39 localhost last message repeated 2 times
Mar 8 01:59:39 localhost ntpd: ntpd startup succeeded
Mar 8 01:59:39 localhost vsftpd: vsftpd vsftpd succeeded
Mar 8 01:59:40 localhost gpm: gpm startup succeeded
Mar 8 01:59:42 localhost alsasound: Starting sound driver snd-emu10k1
succeeded
Mar 8 01:59:42 localhost alsasound: Starting sound driver snd-usb-audio
succeeded
Mar 8 01:59:42 localhost alsasound: Starting sound driver snd-emu10k1
succeeded
Mar 8 01:59:42 localhost alsasound: Starting sequencer succeeded
Mar 8 01:59:43 localhost alsasound: Starting sequencer driver snd-seq-midi
succeeded
Mar 8 01:59:43 localhost alsasound: Starting sequencer driver
snd-emu10k1-synth succeeded
Mar 8 01:59:43 localhost alsactl: /usr/sbin/alsactl: set_control:930:
Mar 8 01:59:43 localhost alsactl: warning: name mismatch (Music Playback
Volume/Synth Playback Volume) for control #6
Mar 8 01:59:43 localhost alsactl: /usr/sbin/alsactl: set_control:932:
warning: index mismatch (0/0) for control #6
Mar 8 01:59:43 localhost alsactl: /usr/sbin/alsactl: set_control:934: failed
to obtain info for control #6 (Operation not permitted)
Mar 8 01:59:43 localhost alsasound: Restoring sound driver settings failed
Mar 8 01:59:44 localhost rc: Starting rtirq: succeeded
Mar 8 01:59:44 localhost crond: crond startup succeeded
Mar 8 01:59:45 localhost xfs: xfs startup succeeded
Mar 8 01:59:45 localhost anacron: anacron startup succeeded
Mar 8 01:59:45 localhost atd: atd startup succeeded
Mar 8 01:59:45 localhost readahead: Starting background readahead:
Mar 8 01:59:45 localhost rc: Starting readahead: succeeded
Mar 8 01:59:46 localhost messagebus: messagebus startup succeeded
Mar 8 01:59:46 localhost wine: Registering binary handler for Windows
applications
Mar 8 01:59:46 localhost rc: Starting wine: succeeded
Mar 8 01:59:50 localhost rc: Starting webmin: succeeded
Mar 8 02:18:09 localhost messagebus: messagebus -TERM succeeded
Mar 8 02:18:09 localhost atd: atd shutdown succeeded
Mar 8 02:18:09 localhost cups: cupsd shutdown succeeded
Mar 8 02:18:09 localhost webmin: Stopping Webmin server
in /usr/libexec/webmin
Mar 8 02:18:09 localhost rc: Stopping webmin: succeeded
Mar 8 02:18:09 localhost xfs: xfs shutdown succeeded
Mar 8 02:18:13 localhost alsasound: sound driver stop succeeded
Mar 8 02:18:13 localhost gpm: gpm shutdown succeeded
Mar 8 02:18:13 localhost sshd: sshd -TERM succeeded
Mar 8 02:18:13 localhost smartd: smartd shutdown succeeded
Mar 8 02:18:13 localhost vsftpd: vsftpd shutdown succeeded
Mar 8 02:18:13 localhost xinetd: xinetd shutdown succeeded
Mar 8 02:18:13 localhost acpid: acpid shutdown succeeded
Mar 8 02:18:14 localhost crond: crond shutdown succeeded
Mar 8 02:18:14 localhost ntpd: succeeded
Mar 8 02:18:14 localhost ntpd: succeeded
Mar 8 02:18:14 localhost ntpd: ntpd shutdown succeeded
Mar 8 02:18:14 localhost dd: 1+0 records in
Mar 8 02:18:14 localhost dd: 1+0 records out
Mar 8 02:18:14 localhost random: Saving random seed: succeeded
This log is for kernel-2.6.11-0.3.rdt.rhfc2.ccrma, and shows the errors
loading the Alsa modules.
Mar 8 02:20:39 localhost syslog: syslogd startup succeeded
Mar 8 02:20:39 localhost syslog: klogd startup succeeded
Mar 8 02:20:39 localhost irqbalance: irqbalance startup succeeded
Mar 8 02:20:39 localhost random: Initializing random number generator:
succeeded
Mar 8 02:20:39 localhost autofs: automount startup succeeded
Mar 8 02:20:40 localhost smartd: smartd startup succeeded
Mar 8 02:20:40 localhost acpid: acpid startup succeeded
Mar 8 02:20:12 localhost rc.sysinit: -e
Mar 8 02:20:12 localhost sysctl: net.ipv4.ip_forward = 0
Mar 8 02:20:12 localhost sysctl: net.ipv4.conf.default.rp_filter = 1
Mar 8 02:20:12 localhost sysctl: kernel.sysrq = 0
Mar 8 02:20:12 localhost sysctl: kernel.core_uses_pid = 1
Mar 8 02:20:12 localhost rc.sysinit: Configuring kernel parameters:
succeeded
Mar 8 02:20:12 localhost date: Wed Mar 8 02:20:05 CET 2006
Mar 8 02:20:12 localhost rc.sysinit: Setting clock (localtime): Wed Mar 8
02:20:05 CET 2006 succeeded
Mar 8 02:20:12 localhost rc.sysinit: Loading default keymap succeeded
Mar 8 02:20:12 localhost rc.sysinit: Setting hostname localhost.localdomain:
succeeded
Mar 8 02:20:12 localhost rc.sysinit: Initializing USB controller (uhci-hcd):
succeeded
Mar 8 02:20:12 localhost rc.sysinit: Mounting USB filesystem: succeeded
Mar 8 02:20:12 localhost fsck: /: clean, 246892/1154176 files,
1329460/2304028 blocks
Mar 8 02:20:12 localhost rc.sysinit: Checking root filesystem succeeded
Mar 8 02:20:12 localhost rc.sysinit: Remounting root filesystem in read-write
mode: succeeded
Mar 8 02:20:15 localhost rc.sysinit: Activating swap partitions: succeeded
Mar 8 02:20:47 localhost cups: cupsd startup succeeded
Mar 8 02:20:19 localhost fsck: /home: clean, 30221/2741760 files,
2003004/5478354 blocks
Mar 8 02:20:19 localhost rc.sysinit: Checking filesystems succeeded
Mar 8 02:20:20 localhost rc.sysinit: Mounting local filesystems: succeeded
Mar 8 02:20:20 localhost rc.sysinit: Enabling local filesystem quotas:
succeeded
Mar 8 02:20:21 localhost rc.sysinit: Enabling swap space: succeeded
Mar 8 02:20:22 localhost microcode_ctl: microcode_ctl startup succeeded
Mar 8 02:20:47 localhost sshd: succeeded
Mar 8 02:20:22 localhost readahead_early: Starting background readahead:
Mar 8 02:20:22 localhost rc: Starting readahead_early: succeeded
Mar 8 02:20:34 localhost kudzu: succeeded
Mar 8 02:20:47 localhost xinetd: xinetd startup succeeded
Mar 8 02:20:34 localhost kudzu: Updating /etc/fstab succeeded
Mar 8 02:20:35 localhost iptables: succeeded
Mar 8 02:20:35 localhost sysctl: net.ipv4.ip_forward = 0
Mar 8 02:20:35 localhost sysctl: net.ipv4.conf.default.rp_filter = 1
Mar 8 02:20:50 localhost rtload: succeeded
Mar 8 02:20:35 localhost sysctl: kernel.sysrq = 0
Mar 8 02:20:35 localhost sysctl: kernel.core_uses_pid = 1
Mar 8 02:20:35 localhost network: Setting network parameters: succeeded
Mar 8 02:20:35 localhost network: Bringing up loopback interface: succeeded
Mar 8 02:20:38 localhost network: Bringing up interface eth0: succeeded
Mar 8 02:20:50 localhost ntpd: succeeded
Mar 8 02:20:50 localhost last message repeated 2 times
Mar 8 02:20:50 localhost ntpd: ntpd startup succeeded
Mar 8 02:20:51 localhost vsftpd: vsftpd vsftpd succeeded
Mar 8 02:20:51 localhost gpm: gpm startup succeeded
Mar 8 02:20:55 localhost modprobe: FATAL: Error inserting snd_emu10k1
(/lib/modules/2.6.11-0.3.rdt.rhfc2.ccrma/updates/pci/emu10k1/snd-emu10k1.ko):
Unknown symbol in module, or unknown parameter (see dmesg)
Mar 8 02:20:55 localhost alsasound: Starting sound driver snd-emu10k1
succeeded
Mar 8 02:20:55 localhost modprobe: FATAL: Error inserting snd_usb_audio
(/lib/modules/2.6.11-0.3.rdt.rhfc2.ccrma/updates/usb/snd-usb-audio.ko):
Unknown symbol in module, or unknown parameter (see dmesg)
Mar 8 02:20:55 localhost alsasound: Starting sound driver snd-usb-audio
failed
Mar 8 02:20:55 localhost modprobe: FATAL: Error inserting snd_emu10k1
(/lib/modules/2.6.11-0.3.rdt.rhfc2.ccrma/updates/pci/emu10k1/snd-emu10k1.ko):
Unknown symbol in module, or unknown parameter (see dmesg)
Mar 8 02:20:55 localhost alsasound: Starting sound driver snd-emu10k1
succeeded
Mar 8 02:20:55 localhost alsasound: Starting sequencer succeeded
Mar 8 02:20:56 localhost alsactl: /usr/sbin/alsactl: load_state:1272:
Mar 8 02:20:56 localhost alsactl: No soundcards found...
Mar 8 02:20:56 localhost alsasound: Restoring sound driver settings failed
Mar 8 02:20:56 localhost rtirq: S88rtirq: start [rtc] irq=8 pid=229 prio=80:
OK.
Mar 8 02:20:56 localhost rtirq: S88rtirq: start [uhci_hcd] irq=11 pid=20
prio=60: OK.
Mar 8 02:20:56 localhost rtirq: S88rtirq: start [i8042] irq=1 pid=342
prio=50: OK.
Mar 8 02:20:56 localhost rtirq: S88rtirq: start [i8042] irq=12 pid=250
prio=49: OK.
Mar 8 02:20:56 localhost rc: Starting rtirq: succeeded
Mar 8 02:20:56 localhost crond: crond startup succeeded
Mar 8 02:20:57 localhost xfs: xfs startup succeeded
Mar 8 02:20:58 localhost anacron: anacron startup succeeded
Mar 8 02:20:58 localhost atd: atd startup succeeded
Mar 8 02:20:58 localhost readahead: Starting background readahead:
Mar 8 02:20:58 localhost rc: Starting readahead: succeeded
Mar 8 02:20:59 localhost messagebus: messagebus startup succeeded
Mar 8 02:20:59 localhost wine: Registering binary handler for Windows
applications
Mar 8 02:20:59 localhost rc: Starting wine: succeeded
Mar 8 02:21:03 localhost rc: Starting webmin: succeeded
Mar 8 05:13:25 localhost xfs: xfs -USR1 succeeded
dmesg attached for kernel-2.6.11-0.3.rdt.rhfc2.ccrma.
Many thanks for any help that may be offered. Nigel.
--Boundary-00=_wTyDE3eP9HRYzCZ
Content-Type: text/plain;
charset="us-ascii";
name="dmesg"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename="dmesg"
Linux version 2.6.11-0.3.rdt.rhfc2.ccrma (machbuild@cmn37.Stanford.EDU) (gcc version 3.3.3 20040412 (Red Hat Linux 3.3.3-7)) #1 Tue Mar 22 05:06:00 EST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003f7f0000 (usable)
BIOS-e820: 000000003f7f0000 - 000000003f7f3000 (ACPI NVS)
BIOS-e820: 000000003f7f3000 - 000000003f800000 (ACPI data)
BIOS-e820: 000000003f800000 - 0000000040000000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
119MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 260080
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:16
HighMem zone: 30704 pages, LIFO batch:7
DMI not present.
ACPI: RSDP (v000 VIA601 ) @ 0x000f63c0
ACPI: RSDT (v001 VIA601 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3f7f3000
ACPI: FADT (v001 VIA601 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3f7f3040
ACPI: DSDT (v001 VIA601 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI: PM-Timer IO Port: 0x4008
Allocating PCI resources starting at 40000000 (gap: 40000000:bfff0000)
Built 1 zonelists
Kernel command line: ro root=LABEL=/ rhgb quiet
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (017f3000)
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 1299.177 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1026688k/1040320k available (2211k kernel code, 12868k reserved, 699k data, 204k init, 122816k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 2572.28 BogoMIPS (lpj=1286144)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel(R) Celeron(TM) CPU 1300MHz stepping 04
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0800 (from 0e00)
spawn_desched_task(00000000)
desched cpu_callback 3/00000000
ksoftirqd started up.
softirq RT prio: 24.
desched cpu_callback 2/00000000
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 411k freed
desched thread 0 started up.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb3f0, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050211
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Via IRQ fixup
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *9
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically. If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device(). As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior. If this argument makes the device work again,
** please email the output of "lspci" to bjorn.helgaas@hp.com
** so I can fix the driver.
TC classifier action (bugs to netdev@oss.sgi.com cc hadi@cyberus.ca)
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1141784386.459:0): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key C85397CC4CF5D2FD
- User ID: Red Hat, Inc. (Kernel Module GPG key)
PCI: Disabling Via external APIC routing
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU0] (supports 2 throttling states)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA Apollo ProMedia/PLE133Ta chipset
agpgart: Maximum main memory to use for agp memory: 933M
agpgart: AGP aperture is 64M @ 0xe0000000
[drm] Initialized drm 1.0.0 20040925
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xc008-0xc00f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: Maxtor 6Y080L0, ATA DISK drive
hdb: HDS722540VLAT20, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: SONY CD-RW CRX230E, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 128KiB
hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
hda:hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hdb: DMA disabled
ide0: reset: success
hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 > hda3 hda4
hdb: max request size: 1024KiB
hdb: 80418240 sectors (41174 MB) w/1794KiB Cache, CHS=16383/255/63
hdb: cache flushes supported
hdb: hdb1 hdb2 < hdb5 hdb6 hdb7 >
hdc: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
padlock: VIA PadLock not detected.
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI wakeup devices:
SLPB PCI0 USB0 USB1 MODM UAR1 UAR2 LPT1
ACPI: (supports S0 S3 S4 S5)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
Freeing unused kernel memory: 204k freed
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0397700(lo)
IPv6 over IPv4 tunneling driver
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ibm_acpi: ec object not found
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: irq 11, io base 0xc400
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:07.3[D] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:07.3: UHCI Host Controller
uhci_hcd 0000:00:07.3: irq 11, io base 0xc800
uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
usb 1-1: new full speed USB device using uhci_hcd and address 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
snd_usb_audio: Unknown parameter `'
snd_usb_audio: Unknown parameter `'
midi: probe of 1-1:1.0 failed with error -5
usb-midi: Found MIDISTREAMING on dev 0a4d:0066, iface 1
usb-midi: Found MIDIStreaming device corresponding to Release 1.00 of spec.
usb-midi: Found IN Jack 0x01 EMBEDDED
usb-midi: Found IN Jack 0x02 EXTERNAL
usb-midi: Found OUT Jack 0x03 EMBEDDED, 1 pins
usb-midi: Found OUT Jack 0x04 EXTERNAL, 1 pins
modprobe/1049: BUG in usb_maxpacket at include/linux/usb.h:1118
[<f88e3113>] alloc_midi_in_endpoint+0x173/0x1e0 [usb_midi] (8)
[<f88e3cf7>] alloc_usb_midi_device+0xb7/0x7a0 [usb_midi] (48)
[<c01da352>] vsnprintf+0x262/0x4f0 (40)
[<c011f2af>] call_console_drivers+0x9f/0x130 (16)
[<f88e45fc>] detect_midi_subclass+0xbc/0xe0 [usb_midi] (172)
[<f88e47e9>] usb_midi_probe+0x89/0x120 [usb_midi] (36)
[<c028d82f>] usb_probe_interface+0x5f/0x80 (28)
[<c024f8b9>] driver_probe_device+0x29/0x80 (16)
[<c024fa07>] driver_attach+0x57/0x90 (12)
[<c024ff10>] bus_add_driver+0xa0/0xd0 (32)
[<c028d908>] usb_register+0x48/0xb0 (32)
[<c0138cca>] sys_init_module+0x19a/0x260 (28)
[<c0103029>] sysenter_past_esp+0x52/0x75 (24)
---------------------------
| preempt count: 00000001 ]
| 1-level deep critical section nesting:
----------------------------------------
.. [<c0134cbd>] .... print_traces+0xd/0x40
.....[<00000000>] .. ( <= 0x0)
usb-midi: fetchString(2)
usb-midi: fetchString = 25
usbmidi: found [ MK-225C USB MIDI keyboard ] (0x0a4d:0x0066), attached:
usbmidi: /dev/midi00: in (ep:81 cid: 0 bufsiz: 0) out (ep:02 cid: 0 bufsiz:64)
usbcore: registered new driver midi
EXT3 FS on hda1, internal journal
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
cdrom: open failed.
Adding 1536184k swap on /dev/hda4. Priority:-1 extents:1
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
--Boundary-00=_wTyDE3eP9HRYzCZ--