[PlanetCCRMA] F8 on iMac won't boot

[Len]

----- Original Message ----
From: Fernando Lopez-Lezcano <nando at ccrma.Stanford.EDU>
To: Michael Gurevich <gurevich at ccrma.Stanford.EDU>
Cc: planetccrma at ccrma.Stanford.EDU
Sent: Friday, April 11, 2008 12:16:10 PM
Subject: Re: [PlanetCCRMA] F8 on iMac won't boot

On Tue, 2008-04-08 at 00:05 +0100, Michael Gurevich wrote:
> Thanks Nando,
> 
> acpi=off did the trick. The kernel boots, jack and alsa seem to work 
> normally (after removing the alsa-plugins-pulseaudio package), but with 
> one weirdness: the audio level is really low. I'm using the built-in 
> Intel hardware:
>   Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
> 
> I've cranked every output level that I know about up to maximum, but 
> everything (audio CD, soundfile playback, full-scale sine wave from Pd, 
> tried all from both jack and alsa) sounds somewhere between pianissimo 
> and piano in headphones, and non-existent from the built in speakers 
> (I'm assuming it's there but masked by the fan noise). Just to be sure, 
> I verified that the audio hardware works normally on the same machine 
> booted in OS X. I must be missing something obvious... Help? 

I found this:
  http://ubuntuforums.org/archive/index.php/t-611345.html

May contain the beginning of an answer (maybe :-)
It is related to the post from Len which included this URL:
([PlanetCCRMA] Jack and Intel 82801g Audio - Possible Solution for us)

http://www.mjmwired.net/kernel/Documentation/sound/alsa/ALSA-Configuration.txt

Very good resource!
Look for "imac" in that file (maybe try "model=imac-intel-20"?)

-- Fernando



Since links come and go, I wanted to let you know that the file referenced above (ALSA-Configuration.txt) is included as part of the tarball for  alsa-driver  (e.g., alsa-driver-1.0.16.tar.bz2)  on alsa-project.org.

Len


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com