[PlanetCCRMA] permission problems with recent jack update 0.109.2

[Hector Centeno]

Thanks Fernando,

I'll try that. For now I would like to report that downgrading to the
previous version works and I can get Jack with Freebob running
normally. The strange thing is that right after downgrading I tried to
start Jack and got the same error as with 109.2 but after rebooting it
worked fine! I then reinstalled 109.2 and rebooted but it didn't work,
same error.

Hector




On Tue, Mar 18, 2008 at 6:11 PM, Fernando Lopez-Lezcano
<nando@ccrma.stanford.edu> wrote:
> On Tue, 2008-03-18 at 17:59 -0400, Hector Centeno wrote:
>  > Fernandom
>  >
>  > Thanks for your reply. I found the same suggestion by googling the
>  > problem but setting the permissions this way would have to be redone
>  > after each boot. I tried the solutions suggested at the Freebob FAQ
>  > page ( http://freebob.sourceforge.net/index.php/UdevConfiguration )
>  > but none of them work with Fedora 8. I think I'll be downgrading for
>  > now.
>
>  The permissions can be set permanently by
>  editing /etc/security/console.perms (and/or associated files).
>
>  I don't have handy the files for fc8 to look around. But it involves
>  setting up a new class of devices and defining which permissions to use
>  for both "logged in" and "logged out" conditions.
>
>  -- Fernando
>
>
>
>  > On Tue, Mar 18, 2008 at 5:11 PM, Fernando Lopez-Lezcano
>  > <nando@ccrma.stanford.edu> wrote:
>  > >
>  > > On Tue, 2008-03-18 at 16:08 -0400, Hector Centeno wrote:
>  > >  > Hello,
>  > >  >
>  > >  > I just updated Jack to the recent 0.109.2 and I can't get it to start
>  > >  > using FreeBob. I get this in the messages window:
>  > >  >
>  > >  > Freebob using Firewire port 0, node -1
>  > >  > Ieee1394Service::initialize: Could not get 1394 handle: Permission denied
>  > >  > Is ieee1394 and raw1394 driver loaded?
>  > >  > Fatal (devicemanager.cpp)[68] initialize: Could not initialize
>  > >  > Ieee1349Service object
>  > >  > Fatal (freebob.cpp)[69] freebob_new_handle: Could not initialize device manager
>  > >  > LibFreeBoB ERR: cannot create libfreebob handle
>  > >  > FreeBoB ERR: FREEBOB: Error creating virtual device
>  > >  > cannot load driver module freebob
>  > >  >
>  > >  > Starting Jack using the same command but as root works fine. The
>  > >  > previous version of Jack didn't have this problem.
>  > >
>  > >  Check the permissions of the /dev/*1394* files first... I think that
>  > >  would be the difference between non-root and root based on the messages
>  > >  you posted. But I can't see how the jack upgrade alone would change
>  > >  that...
>  > >
>  > >  -- Fernando
>  > >
>  > >
>  > >
>  >
>  > _______________________________________________
>  > PlanetCCRMA mailing list
>  > PlanetCCRMA@ccrma.stanford.edu
>  > http://ccrma-mail.stanford.edu/mailman/listinfo/planetccrma
>
>