[PlanetCCRMA] Out of the box
David Nielson
naptastic at comcast.net
Fri Oct 24 11:14:12 PDT 2008
I built a system around that card about 2.5 years ago based on the Asus
A8N-SLI deluxe and an Athlon X2 64 2.0ghz.
The HDSP 9652 has only one issue I can find: the volume controls all
start at -inf, and you have to open the HDSPmixer app to set them to 0.
I haven't found a way to normal them at boot.
I was not impressed with the Asus motherboard. My dad and I bought
identical motherboards at the same time. Components on both boards
failed over time, and eventually my dad's board died completely. MSI
motherboards have treated us much better.
I recommend at least 2 GB of RAM; if you decide you want to compile your
own Ardour (which is a very good idea,) this will keep you from using
swap while doing so.
Oh, and stay away from Nvidia graphics if you can. They're a real pain
to get working with CCRMA.
David
Brian McDonald wrote:
> I have an RME HDSP 9652. I would like to spend 400-500 on a
> workstation that works out of the box - meaning, no installation hangs
> or freezes, minimal configuration, put the card in and go. Any
> suggestions as to the best system for my buck, while maintaining my
> sanity would be appreciated.
> ------------------------------------------------------------------------
>
> _______________________________________________
> PlanetCCRMA mailing list
> PlanetCCRMA at ccrma.stanford.edu
> http://ccrma-mail.stanford.edu/mailman/listinfo/planetccrma
>
More information about the PlanetCCRMA
mailing list