[PlanetCCRMA] [PATCH] jackmix on F11 Re: planetccrma-apps missing in F11 repo
David Cornette
david at davidcornette.com
Fri Sep 25 13:07:13 PDT 2009
You're welcome. I'm happy to help. You do so much work that benefits all of
us, we all ought to help howver we are able, whether it is doing stuff like
this, or answering people's questions on the mailing list.
I found a bug report in sbcl's bug tracker that seems to be the same as what
I encountered trying to build cm. I added some info and uploaded the test
case. The bug report is at https://bugs.launchpad.net/sbcl/+bug/410605 , if
you want to keep an eye on it.
On Thu, Sep 24, 2009 at 08:49:35PM -0700, Fernando Lopez-Lezcano wrote:
> Sorry I have not had time to comment - but __thanks__ very much for
> this. It is the start of the academic year here at Stanford and we are
> all running around like headless chicken trying to do too many things at
> once...
>
> I will incorporate your patches and builds asap.
> Thanks again!
> -- Fernando
>
>
> On Thu, 2009-09-24 at 01:09 -0400, David Cornette wrote:
> > I have succeeded in getting jackmix to build on Fedora 11. The issue that I
> > mentioned last time, where spaces were getting inserted into the compiler
> > flags, was relatively easy to fix. There was another issue, though, which was
> > a bit trickier to figure out. Jackmix requires the qt-devel package for qt4,
> > which I had installed. However, Fedora contains both qt4 (which it calls qt)
> > and qt3. That is fine, but the environment variable QTDIR is set for qt3, and
> > even worse, if qt3-devel is installed (it is a requirement of kdevelop), then
> > there will be a /usr/bin/moc which is from qt3, and a /usr/bin/moc-qt4 which
> > is from (obviously) qt4. In order to build jackmix, scons needs to be told to
> > look for moc-qt4 instead of moc.
> >
> > I haven't tested the resulting package at all, but I am attaching the modified
> > spec and patches that allowed jackmix to build.
> >
> >
> > On Wed, Sep 23, 2009 at 02:46:03AM -0400, David Cornette wrote:
> > > I decided to look at what dependencies were missing. I looked at was required
> > > by planetccrma-apps on Fedora 8 (the previous version that I have installed)
> > > and looked for what was and wasn't missing from F11. Here is the list I came
> > > up with:
> > >
> > > cltl2
> > > cm-fomus-sbcl
> > > cm-clm-sbcl
> > > cmn-sbcl
> > > cm-sbcl
> > > freqtweak
> > > hyperspec
> > > jace
> > > jackmix
> > > jdelay
> > > planetccrma-menus
> > >
> > > I downloaded the most recent version of the source rpms for these, and tried
> > > to build them. Some worked ok, and others as expected had issues. I was able
> > > to build cltl2, cmn-sbcl, hyperspec, jace, jdelay, and planetccrma-menus.
> > >
> > > Freqtweak fails because it needs compat-wxGTK24-2-devel and
> > > compat-wxGTK24-2-xrc. Fedora 11 has compat-wxGTK26-devel, which might (or
> > > might not) do to replace compat-wxGTK24-2-devel. There does not appear to be
> > > a replacement for compat-wxGTK24-2-xrc.
> > >
> > > Jackmix seems to have issues with its build scripts. For some reason, the
> > > compiler argument "-fpic" is being changed to "- f p i c". I would think it
> > > is probably some minor issue, but I don't know what exactly.
> > >
> > > Finally, I tried building cm. There were several issues with this one.
> > > First, it needed to have the versions of various other programs specified for
> > > Fedora 11. I am not sure that I got them all right (I don't really understand
> > > the purpose of the "orig" versions) Next, there was a change in sbcl that a
> > > one line change, for which I have a patch that seems to have worked. After,
> > > that, I found that the packaging of portmidi had changed, so the build
> > > requirement should now be on portmidi-devel rather than on portmidi. But then
> > > I ran into what would seem to be an sbcl bug. Here is the message:
> > >
> > > ; compiling file "/home/makerpm/rpmbuild/BUILD/cm/fomus/backend_xml.lisp" (written 22 AUG 2007 06:49:27 PM):
> > >
> > > debugger invoked on a SB-INT:BUG in thread #<THREAD "initial thread" RUNNING {10028E8011}>:
> > > failed AVER:
> > > (ZEROP (HASH-TABLE-COUNT (FASL-OUTPUT-PATCH-TABLE FASL-OUTPUT)))
> > > This is probably a bug in SBCL itself. (Alternatively, SBCL might have been
> > > corrupted by bad user code, e.g. by an undefined Lisp operation like
> > > (FMAKUNBOUND 'COMPILE), or by stray pointers from alien code or from unsafe
> > > Lisp code; or there might be a bug in the OS or hardware that SBCL is running
> > > on.) If it seems to be a bug in SBCL itself, the maintainers would like to
> > > know about it. Bug reports are welcome on the SBCL mailing lists, which you
> > > can find at <http://sbcl.sourceforge.net/>.
> > >
> > > At this point, building pauses, and if I enter (SB-EXT:QUIT), or choose to
> > > accept the result, the build continues, and I get the following rpms:
> > > cm-2.11.0-0.20070607.cvs.10.fc11.x86_64.rpm
> > > cm-clm-sbcl-2.11.0-0.20070607.cvs.10.fc11.x86_64.rpm
> > > cm-cmn-sbcl-2.11.0-0.20070607.cvs.10.fc11.x86_64.rpm
> > > cm-debuginfo-2.11.0-0.20070607.cvs.10.fc11.x86_64.rpm
> > > cm-fomus-2.11.0-0.20070607.cvs.10.fc11.x86_64.rpm
> > > cm-fomus-sbcl-2.11.0-0.20070607.cvs.10.fc11.x86_64.rpm
> > > cm-sbcl-2.11.0-0.20070607.cvs.10.fc11.x86_64.rpm
> > >
> > > I don't know how functional any of these are.
> > >
> > > I noticed that there are also other programs that are missing from the Fedora
> > > 11 repo, like bristol, but those are not required by planetccrma-apps.
> > >
> > > Hopefully this information and patch are helpful.
> > >
> > > On Tue, Sep 08, 2009 at 04:32:30PM -0700, Fernando Lopez-Lezcano wrote:
> > > > On Tue, 2009-09-08 at 16:08 -0400, David Cornette wrote:
> > > > > I have just installed fedora 11 on a new system, and I am in the process
> > > > > of installing stuff. However, I just noticed that the planetccrma-apps
> > > > > metapackage is missing from the Fedora 11 repo. Is this because there
> > > > > are some apps that are still missing? Or is it just an oversight?
> > > >
> > > > Some apps are missing, I should probably take a look again at what is
> > > > missing and what will take to build them. Sorry, I have been busy...
> > > >
> > > > -- Fernando
> > > >
> >
> > > diff -rupN cm/cm.asd cm.dlc/cm.asd
> > > --- cm/cm.asd 2009-09-23 00:48:20.689922466 -0400
> > > +++ cm.dlc/cm.asd 2009-09-23 00:53:28.443960731 -0400
> > > @@ -112,7 +112,7 @@
> > > #+cmu (eq :directory (unix:unix-file-kind (namestring dir)))
> > > #+ecl (eq ':directory (si::file-kind (pathname dir) nil))
> > > #+lispworks (lw:file-directory-p dir)
> > > - #+sbcl (eq :directory (sb-unix:unix-file-kind (namestring dir)))
> > > + #+sbcl (eq :directory (sb-impl::native-file-kind (namestring dir)))
> > > #-(or allegro clisp cmu lispworks sbcl ecl)
> > > (probe-file (make-pathname :directory dir)))
> > >
> >
> > > # current version and release
> > > %define version 2.11.0
> > > %define cvsdate 20070402.113338
> > > %define rel 0.20070607.cvs.10
> > >
> > > # versions of additional packages
> > > %define cffi_ver 070221
> > > %if "%{cvsdate}" != ""
> > > %define cm_gtk_ver %{cvsdate}
> > > %define rts_ver %{cvsdate}
> > > %else
> > > %define cm_gtk_ver 1.0.1
> > > %define rts_ver 2.0.0
> > > %endif
> > > %define portmidi_ver 2.0.2
> > > %define fomus_ver 0.2.28
> > > %define osc_ver 1.0.1
> > >
> > > # on which lisps to build
> > > %define sbcl_build 1
> > > %define cmucl_build 0
> > > %define clisp_build 0
> > >
> > > # does clm work on clisp?
> > > %define clm_clisp 0
> > >
> > > # lisp versions
> > > %if 0%{?fedora} == 11
> > > %define cmucl_ver 19f
> > > %define sbcl_ver 1.0.30
> > > %define sbcl_rel 1
> > > %define clisp_ver 2.47
> > > %define cmucl_orig_ver 19e
> > > %define clisp_orig_ver 2.47
> > > %endif
> > > %if 0%{?fedora} == 10
> > > %define cmucl_ver 19e
> > > %define sbcl_ver 1.0.22
> > > %define sbcl_rel 1
> > > %define clisp_ver 2.46
> > > %define cmucl_orig_ver 19e
> > > %define clisp_orig_ver 2.46
> > > %endif
> > > %if 0%{?fedora} == 9
> > > %define cmucl_ver 19e
> > > %define sbcl_ver 1.0.22
> > > %define sbcl_rel 1
> > > %define clisp_ver 2.47
> > > %define cmucl_orig_ver 19d
> > > %define clisp_orig_ver 2.43
> > > %endif
> > > %if 0%{?fedora} == 8
> > > %define cmucl_ver 19e
> > > %define sbcl_ver 1.0.22
> > > %define sbcl_rel 1
> > > %define clisp_ver 2.43
> > > %define cmucl_orig_ver 19d
> > > %define clisp_orig_ver 2.43
> > > %endif
> > > %if 0%{?fedora} == 7
> > > %define cmucl_ver 19d
> > > %define sbcl_ver 1.0.13
> > > %define sbcl_rel 1
> > > %define clisp_ver 2.43
> > > %define cmucl_orig_ver 19d
> > > %define clisp_orig_ver 2.43
> > > %endif
> > > %if 0%{?fedora} == 6
> > > %define cmucl_ver 19c
> > > %define sbcl_ver 1.0.9
> > > %define sbcl_rel 1
> > > %define clisp_ver 2.41
> > > %define cmucl_orig_ver 19c
> > > %define clisp_orig_ver 2.41
> > > %endif
> > > %if 0%{?rhel} == 4
> > > %define cmucl_ver 19d
> > > %define sbcl_ver 1.0.5
> > > %define sbcl_rel 1
> > > %define cmucl_orig_ver 19d
> > > %endif
> > > %if 0%{?rhel} == 5
> > > %define cmucl_ver 19d
> > > %define sbcl_ver 1.0.13
> > > %define sbcl_rel 1
> > > %define clisp_ver 2.41
> > > %define cmucl_orig_ver 19d
> > > %define clisp_orig_ver 2.41
> > > %endif
> > >
> > > # midishare is not longer supported as of fc2
> > > %if 0%{?fedora} >= 2 || 0%{?rhel} >= 4
> > > %define midishare 0
> > > %else
> > > %define midishare 1
> > > %endif
> > >
> > > # midishare library versions
> > > %if "%{midishare}" == "1"
> > > %define midishareplayerlib libPlayer.so.1.0
> > > %define midisharelib libMidiShare.so.1.0
> > > %endif
> > >
> > > # various locations
> > > %define cmucl_lib_dir %{_libdir}/cmucl/lib
> > > %define clisp_lib_dir %{_libdir}/clisp
> > > %define sbcl_lib_dir %{_libdir}/sbcl
> > > # binary and source directories
> > > %define cmucl_cm_bin_dir %{cmucl_lib_dir}/cm
> > > %define cmucl_subsystems %{cmucl_lib_dir}/subsystems
> > > %define clisp_cm_bin_dir %{clisp_lib_dir}/cm
> > > %define clisp_subsystems %{clisp_lib_dir}/subsystems
> > > %define sbcl_cm_bin_dir %{sbcl_lib_dir}/cm
> > > %define sbcl_subsystems %{_libdir}/sbcl/site-systems
> > > %define cm_src_dir %{_datadir}/common-lisp/source/cm
> > > %define cl_src_dir %{_datadir}/common-lisp/source
> > >
> > > %ifarch x86_64
> > > %define mark64 ()(64bit)
> > > %endif
> > >
> > > # on fedora >= 10 and i386 fasl files get written to the cache directory by the
> > > # common-lisp-controller package, this is a workaround for that
> > >
> > > %ifarch i386
> > > %if 0%{fedora} >= 10
> > > %define uid %(id -u)
> > > %define fasldir /var/cache/common-lisp-controller/%{uid}/sbcl/local/builddir/build/BUILD/cm/
> > > %else
> > > %define fasldir %{nil}
> > > %endif
> > > %else
> > > %define fasldir %{nil}
> > > %endif
> > >
> > > Summary: Common Music
> > > Name: cm
> > > Version: %{version}
> > > Release: %{rel}%{?dist}
> > > License: GPL
> > > Group: Development/Languages
> > > URL: http://www-ccrma.stanford.edu/software/cm
> > > Source0: cm-%{?cvsdate:%{cvsdate}}%{!?cvsdate:%{version}}.tar.gz
> > > Patch0: cm-2.7.0-paths.patch
> > > Patch1: cm-gtk-libdir.patch
> > > Patch2: osc-1.0.1-sockets.patch
> > > Patch3: cm-file-kind.patch
> > > Source1: cffi-%{cffi_ver}.tar.gz
> > > Source2: portmidi-%{portmidi_ver}.tar.gz
> > > Source3: cm-gtk-%{cm_gtk_ver}.tar.gz
> > > Source4: rts-%{rts_ver}.tar.gz
> > > # Fomus: http://common-lisp.net/project/fomus/
> > > Source5: http://common-lisp.net/project/fomus/download/fomus-%{fomus_ver}.tgz
> > > Source6: osc-%{osc_ver}.tar.gz
> > > Source7: cm-get-cvs
> > > BuildRoot: %{_tmppath}/%{name}-%{version}-root
> > > Packager: Fernando Lopez-Lezcano
> > > Vendor: Planet CCRMA
> > > Distribution: Planet CCRMA
> > >
> > > # obsolete old packages
> > > Obsoletes: cm-source
> > >
> > > %if "%{cmucl_build}" == "1"
> > > BuildRequires: cmucl = %{cmucl_ver}
> > > %endif
> > > %if "%{clisp_build}" == "1"
> > > BuildRequires: clisp = %{clisp_ver}
> > > %endif
> > > %if "%{sbcl_build}" == "1"
> > > BuildRequires: sbcl = %{sbcl_ver}
> > > %endif
> > > BuildRequires: portmidi-devel, gtk2-devel
> > >
> > > %description
> > > Common Music (CM), by Rick Taube, is an object-oriented music
> > > composition environment. It produces sound by transforming a
> > > high-level representation of musical structure into a variety of
> > > control protocols for sound synthesis and display. Common Music
> > > defines an extensive library of compositional tools and an API through
> > > which the composer can easily modify and extend the system.
> > >
> > > This package contains Common Music (CM) source and documentation.
> > >
> > > %package cmucl
> > > Summary: Common Music binaries for CMUCL
> > > Group: Development/Languages
> > > Requires: cmucl = %{cmucl_ver}
> > > Requires: cm = %{version}-%{release}
> > > %if "%{midishare}" == "1"
> > > Requires: %{midishareplayerlib}
> > > Requires: %{midisharelib}
> > > BuildRequires: midishare-devel
> > > BuildRequires: midishare-player-devel
> > > %endif
> > > Obsoletes: cmucl-cm-clm cmucl-cm-clm-cmn
> > >
> > > %description cmucl
> > > This package contains Common Music (CM) binaries built on top of CMUCL
> > > Common Lisp. To start Common Music run /usr/bin/cm-cmucl.
> > >
> > > %package clm2-cmucl
> > > Summary: Automatically start CLM2 when CM starts
> > > Group: Development/Languages
> > > Requires: cm-cmucl
> > > Requires: clm2-cmucl
> > >
> > > %description clm2-cmucl
> > > This package triggers the automatic loading of Common Lisp Music (CLM2)
> > > when Common Music (CM) starts. To start Common Music and Common Lisp
> > > Music run /usr/bin/cm-cmucl after installing this package. This is a
> > > backward compatibility package for the old version of CLM (2).
> > >
> > > %package clm-cmucl
> > > Summary: Automatically start CLM when CM starts
> > > Group: Development/Languages
> > > Requires: cm-cmucl
> > > Requires: clm-cmucl
> > >
> > > %description clm-cmucl
> > > This package triggers the automatic loading of Common Lisp Music (CLM)
> > > when Common Music (CM) starts. To start Common Music and Common Lisp
> > > Music 2 run /usr/bin/cm-cmucl after installing this package.
> > >
> > > %package cmn-cmucl
> > > Summary: Automatically start CMN when CM starts
> > > Group: Development/Languages
> > > Requires: cm-cmucl
> > > Requires: cmn-cmucl
> > >
> > > %description cmn-cmucl
> > > This package triggers the automatic loading of Common Music Notation (CMN)
> > > when Common Music (CM) starts. To start Common Music and Common Music
> > > Notation run /usr/bin/cm-cmucl after installing this package.
> > >
> > > %package clisp
> > > Summary: Common Music binaries for CLISP
> > > Group: Development/Languages
> > > Requires: clisp = %{clisp_ver}
> > > Requires: cm = %{version}-%{release}
> > > Obsoletes: clisp-cm-clm clisp-cm-clm-cmn
> > >
> > > %description clisp
> > > This package contains Common Music (CM) binaries built on top of CLISP
> > > Common Lisp. To start Common Music run /usr/bin/cm-clisp.
> > >
> > > %package clm2-clisp
> > > Summary: Automatically start CLM2 when CM starts
> > > Group: Development/Languages
> > > Requires: cm-clisp
> > > Requires: clm2-clisp
> > >
> > > %description clm2-clisp
> > > This package triggers the automatic loading of Common Lisp Music (CLM2)
> > > when Common Music (CM) starts. To start Common Music and Common Lisp
> > > Music 2 run /usr/bin/cm-clisp. This is a backward compatibility package
> > > for the old version of CLM (2).
> > >
> > > %package clm-clisp
> > > Summary: Automatically start CLM when CM starts
> > > Group: Development/Languages
> > > Requires: cm-clisp
> > > Requires: clm-clisp
> > >
> > > %description clm-clisp
> > > This package triggers the automatic loading of Common Lisp Music (CLM)
> > > when Common Music (CM) starts. To start Common Music and Common Lisp
> > > Music run /usr/bin/cm-clisp.
> > >
> > > %package cmn-clisp
> > > Summary: Automatically start CMN when CM starts
> > > Group: Development/Languages
> > > Requires: cm-clisp
> > > Requires: cmn-clisp
> > >
> > > %description cmn-clisp
> > > This package triggers the automatic loading of Common Music Notation (CMN)
> > > when Common Music (CM) starts. To start Common Music and Common Music
> > > Notation run /usr/bin/cm-clisp.
> > >
> > > %package sbcl
> > > Summary: Common Music binaries for SBCL
> > > Group: Development/Languages
> > > Requires: sbcl >= %{sbcl_ver}-%{sbcl_rel}
> > > Requires: cm = %{version}-%{release}
> > > # requirements for portmidi and cm-gtk, these are loaded at runtime
> > > # from lisp and cannot be automagically discovered by rpm
> > > Requires: libportmidi.so.0%{?mark64}
> > > # see cm-gtk/gtkcffi-cmuclsbcl.lisp for the libraries being loaded
> > > Requires: gtk2-devel
> > >
> > > %description sbcl
> > > This package contains Common Music (CM) binaries built on top of SBCL
> > > Common Lisp. To start Common Music run /usr/bin/cm-sbcl.
> > >
> > > %package clm-sbcl
> > > Summary: Automatically start CLM when CM starts
> > > Group: Development/Languages
> > > Requires: cm-sbcl
> > > Requires: clm-sbcl
> > >
> > > %description clm-sbcl
> > > This package triggers the automatic loading of Common Lisp Music (CLM)
> > > when Common Music (CM) starts. To start Common Music and Common Lisp
> > > Music 2 run /usr/bin/cm-sbcl after installing this package.
> > >
> > > %package cmn-sbcl
> > > Summary: Automatically start CMN when CM starts
> > > Group: Development/Languages
> > > Requires: cm-sbcl
> > > Requires: cmn-sbcl
> > >
> > > %description cmn-sbcl
> > > This package triggers the automatic loading of Common Music Notation (CMN)
> > > when Common Music (CM) starts. To start Common Music and Common Music
> > > Notation run /usr/bin/cm-sbcl after installing this package.
> > >
> > > %package fomus
> > > Summary: Music notation tool for computer music composers
> > > Group: Development/Languages
> > > Requires: cm
> > >
> > > %description fomus
> > > FOMUS (FOrmat MUSic) is a music notation tool for computer music
> > > composers. Its purpose is to facilitate the conversion of "raw"
> > > algorithmic output data into readable music notation, a process that
> > > can be frustrating and time consuming since it often requires dumping
> > > data into some intermediary format (such as MIDI) and importing it
> > > into a notation program that only does a mediocre job of
> > > conversion. FOMUS integrates with Common Music, using some of its
> > > functionality if present and also functioning as a backend.
> > >
> > > %package fomus-sbcl
> > > Summary: Music notation tool for computer music composers
> > > Group: Development/Languages
> > > Requires: cm-sbcl
> > > Requires: cm-fomus
> > >
> > > %description fomus-sbcl
> > > FOMUS (FOrmat MUSic) is a music notation tool for computer music
> > > composers. Its purpose is to facilitate the conversion of "raw"
> > > algorithmic output data into readable music notation, a process that
> > > can be frustrating and time consuming since it often requires dumping
> > > data into some intermediary format (such as MIDI) and importing it
> > > into a notation program that only does a mediocre job of
> > > conversion. FOMUS integrates with Common Music, using some of its
> > > functionality if present and also functioning as a backend.
> > >
> > > %prep
> > > %setup -q -n %{name}
> > > %setup -q -T -D -a 1 -n %{name}
> > > %setup -q -T -D -a 2 -n %{name}
> > > %setup -q -T -D -a 3 -n %{name}
> > > %setup -q -T -D -a 4 -n %{name}
> > > %setup -q -T -D -a 5 -n %{name}
> > > %setup -q -T -D -a 6 -n %{name}
> > > %patch1 -p1
> > > %patch2 -p0
> > > %patch3 -p1
> > >
> > > %build
> > > %if "%{midishare}" == "1"
> > > # load proper versions of midishare
> > > %{__perl} -p -i -e "s/libPlayer.so/%{midishareplayerlib}/g" midishare/Player-Interface.lisp
> > > %{__perl} -p -i -e "s/libMidiShare.so/%{midisharelib}/g" midishare/MidiShare-Interface.lisp
> > > %endif
> > >
> > > # change name of cffi-* to just cffi
> > > mv cffi-%{cffi_ver} cffi
> > >
> > > # make packages look for libraries in the right place for x86_64
> > > %ifarch x86_64
> > > %{__perl} -p -i -e "s|/usr/lib|/usr/lib64|g" portmidi/portmidi.asd
> > > %{__perl} -p -i -e "s|/usr/lib|/usr/lib64|g" portmidi/cffi-portmidi.lisp
> > > %{__perl} -p -i -e "s|/lib/|/lib64/|g" cm-gtk/gtkffi-cmusbcl.lisp
> > > %endif
> > >
> > > # SBCL
> > > %if %{sbcl_build}
> > > # build the rts library
> > > cd rts
> > > ./configure
> > > %{__make}
> > > cd ../
> > >
> > > # define the sbcl load program
> > > %{__cat} <<EOF >cm-sbcl-load.lisp
> > > ;;;
> > > ;;; SBCL Common Music (CM) startup code
> > > ;;;
> > > (declaim (sb-ext:muffle-conditions style-warning sb-ext:compiler-note))
> > > (declaim (sb-ext:muffle-conditions sb-ext:code-deletion-note))
> > > (setf *compile-print* nil)
> > > ;;;
> > > ;;; Load Common Music
> > > ;;;
> > > (format t ";;;~%;;; loading Common Music %{version}...~%;;;~%")
> > > (load "%{cm_src_dir}/src/cm.lisp")
> > > ;;; load portmidi
> > > (if (probe-file "%{sbcl_cm_bin_dir}/use-system-portmidi")
> > > (use-system :portmidi :directory "%{sbcl_lib_dir}/portmidi/"))
> > > ;;; load osc
> > > (if (probe-file "%{sbcl_cm_bin_dir}/use-system-osc")
> > > (sb-ext:without-package-locks
> > > (use-system :osc :directory "%{sbcl_lib_dir}/osc/")))
> > > ;;; load cm-gtk
> > > (if (probe-file "%{sbcl_cm_bin_dir}/use-system-cm-gtk")
> > > (use-system :cm-gtk :directory "%{sbcl_lib_dir}/cm-gtk/"))
> > > ;;; load rts
> > > (if (probe-file "%{sbcl_cm_bin_dir}/use-system-rts")
> > > (use-system :rts :directory "%{sbcl_lib_dir}/rts/"))
> > > ;;; load fomus
> > > (if (probe-file "%{sbcl_cm_bin_dir}/use-system-fomus")
> > > (use-system :fomus :directory "%{sbcl_lib_dir}/fomus/"))
> > > ;;;
> > > ;;; Load clm
> > > ;;;
> > > (if (probe-file "%{sbcl_cm_bin_dir}/use-system-clm")
> > > (progn
> > > (format t "~%;;;~%;;; loading CLM3...~%;;;~%")
> > > (setf *package* (find-package :cm))
> > > (use-system :clm)))
> > > ;;;
> > > ;;; Load cmn
> > > ;;;
> > > (if (probe-file "%{sbcl_cm_bin_dir}/use-system-cmn")
> > > (progn
> > > (format t ";;;~%;;; loading CMN... (be patient)~%;;;~%")
> > > (setf *package* (find-package :cm))
> > > (use-system :cmn)))
> > >
> > > EOF
> > >
> > > # build cm
> > > /usr/bin/sbcl <<EOF
> > > ;;; make compilation process less verbose...
> > > (declaim (sb-ext:muffle-conditions style-warning sb-ext:compiler-note))
> > > (declaim (sb-ext:muffle-conditions sb-ext:code-deletion-note))
> > > (setf *compile-print* nil)
> > > %if "%{midishare}" == "1"
> > > ;;; build the midishare interface
> > > (push :midishare *features*)
> > > (compile-file "midishare/MidiShare-Interface.lisp")
> > > (load "midishare/MidiShare-Interface")
> > > (compile-file "midishare/Player-Interface.lisp")
> > > (load "midishare/Player-Interface")
> > > %endif
> > > ;;; build Common Music
> > > ;;;
> > > ;;; we define the directories, otherwise cm.sh fails on the mach chroot
> > > ;;; because /dev/stderr is not there
> > > (defvar *cm-directory* "%{_builddir}/%{name}")
> > > (defvar *cm-bin-directory* "%{_builddir}/%{name}/bin/sbcl_bin/")
> > > (load "src/cm.lisp")
> > > ;;; the common music loader stub
> > > (compile-file "cm-sbcl-load.lisp")
> > > ;;; build cffi
> > > (sb-ext:without-package-locks
> > > (use-system :cffi :directory (truename "./cffi")))
> > > ;;; build portmidi
> > > (use-system :portmidi :directory (truename "./portmidi"))
> > > ;;; build osc
> > > (sb-ext:without-package-locks
> > > (use-system :osc :directory (truename "./osc")))
> > > ;;; build cm-gtk
> > > (use-system :cm-gtk :directory (truename "./cm-gtk"))
> > > ;;; build rts
> > > (use-system :rts :directory (truename "./rts"))
> > > ;;; build fomus
> > > (use-system :fomus :directory (truename "./fomus"))
> > > (quit)
> > > EOF
> > > # move binaries away
> > > mkdir cffi-bin-sbcl
> > > mv %{fasldir}cffi/src/*fasl cffi-bin-sbcl/
> > > mkdir portmidi-bin-sbcl
> > > mv %{fasldir}portmidi/*.fasl portmidi-bin-sbcl/
> > > mkdir osc-bin-sbcl
> > > mv %{fasldir}osc/*.fasl osc-bin-sbcl/
> > > mkdir cm-gtk-bin-sbcl
> > > mv %{fasldir}cm-gtk/*.fasl cm-gtk-bin-sbcl/
> > > mkdir rts-bin-sbcl
> > > mv %{fasldir}rts/*.fasl rts-bin-sbcl/
> > > mv rts/*.so rts-bin-sbcl/
> > > mkdir fomus-bin-sbcl
> > > mv %{fasldir}fomus/*.fasl fomus-bin-sbcl/
> > > %endif # SBCL
> > >
> > > # CMUCL
> > > %if %{cmucl_build}
> > > %{__mkdir} bin-cmucl
> > > # define the cmucl load program, checks for clm and cmn use-system files
> > > %{__cat} <<EOF >cm-cmucl-load.lisp
> > > ;;;
> > > ;;; CMUCL Common Music (CM) startup code
> > > ;;;
> > > (setf *compile-print* nil)
> > > (ext:unlock-all-packages)
> > > (in-package :cl-user)
> > > ;;;
> > > ;;; Load Common Music
> > > ;;;
> > > (format t ";;;~%;;; loading Common Music %{version}...~%;;;~%")
> > > (load "%{cm_src_dir}/src/cm.lisp")
> > > ;;; load portmidi
> > > (if (probe-file "%{cmucl_cm_bin_dir}/use-system-portmidi")
> > > (use-system :portmidi :directory "%{cmucl_lib_dir}/portmidi/"))
> > > ;;; load osc
> > > (if (probe-file "%{cmucl_cm_bin_dir}/use-system-osc")
> > > (sb-ext:without-package-locks
> > > (use-system :osc :directory "%{cmucl_lib_dir}/osc/")))
> > > ;;; load cm-gtk
> > > (if (probe-file "%{cmucl_cm_bin_dir}/use-system-cm-gtk")
> > > (use-system :cm-gtk :directory "%{cmucl_lib_dir}/cm-gtk/"))
> > > ;;;
> > > ;;; Load clm, new version has priority
> > > ;;;
> > > (if (probe-file "%{cmucl_cm_bin_dir}/use-system-clm")
> > > (progn
> > > (format t "~%;;;~%;;; loading CLM3...~%;;;~%")
> > > (setf *package* (find-package :cm))
> > > (use-system :clm))
> > > (if (probe-file "%{cmucl_cm_bin_dir}/use-system-clm2")
> > > (progn
> > > (format t "~%;;;~%;;; loading CLM2...~%;;;~%")
> > > (setf *package* (find-package :cm))
> > > (use-system :clm2))))
> > > ;;;
> > > ;;; Load cmn
> > > ;;;
> > > (if (probe-file "%{cmucl_cm_bin_dir}/use-system-cmn")
> > > (progn
> > > (format t ";;;~%;;; loading CMN... (be patient)~%;;;~%")
> > > (setf *package* (find-package :cm))
> > > (use-system :cmn)))
> > > EOF
> > >
> > > # define a cmucl load program with clm2 priority for
> > > # recalcitrant old timers that won't migrate to 3 :-)
> > > %{__cat} <<EOF >cm-cmucl-load2.lisp
> > > ;;;
> > > ;;; CMUCL Common Music (CM) startup code
> > > ;;;
> > > (setf *compile-print* nil)
> > > (ext:unlock-all-packages)
> > > (in-package :cl-user)
> > > ;;;
> > > ;;; Load Common Music
> > > ;;;
> > > (format t ";;;~%;;; loading Common Music %{version}...~%;;;~%")
> > > (load "%{cm_src_dir}/src/cm.lisp")
> > > ;;; load portmidi
> > > (if (probe-file "%{cmucl_cm_bin_dir}/use-system-portmidi")
> > > (use-system :portmidi :directory "%{cmucl_lib_dir}/portmidi/"))
> > > ;;; load osc
> > > (if (probe-file "%{cmucl_cm_bin_dir}/use-system-osc")
> > > (sb-ext:without-package-locks
> > > (use-system :osc :directory "%{cmucl_lib_dir}/osc/")))
> > > ;;; load cm-gtk
> > > (if (probe-file "%{cmucl_cm_bin_dir}/use-system-cm-gtk")
> > > (use-system :cm-gtk :directory "%{cmucl_lib_dir}/cm-gtk/"))
> > > ;;;
> > > ;;; Load clm2
> > > ;;;
> > > (if (probe-file "%{cmucl_cm_bin_dir}/use-system-clm2")
> > > (progn
> > > (format t "~%;;;~%;;; loading CLM2...~%;;;~%")
> > > (setf *package* (find-package :cm))
> > > (use-system :clm2)))
> > > ;;;
> > > ;;; Load cmn
> > > ;;;
> > > (if (probe-file "%{cmucl_cm_bin_dir}/use-system-cmn")
> > > (progn
> > > (format t ";;;~%;;; loading CMN... (be patient)~%;;;~%")
> > > (setf *package* (find-package :cm))
> > > (use-system :cmn)))
> > > EOF
> > >
> > > # build cm
> > > /usr/bin/lisp <<EOF
> > > ;;; make compilation process less verbose...
> > > (setf *compile-print* nil)
> > > (ext:unlock-all-packages)
> > > (in-package :cl-user)
> > > %if "%{midishare}" == "1"
> > > ;;; build the midishare interface
> > > (push :midishare *features*)
> > > (compile-file "midishare/MidiShare-Interface.lisp")
> > > (load "midishare/MidiShare-Interface")
> > > (compile-file "midishare/Player-Interface.lisp")
> > > (load "midishare/Player-Interface")
> > > %endif
> > > ;;; build Common Music
> > > ;;;
> > > ;;; we define the directories, otherwise cm.sh fails on the mach chroot
> > > ;;; because /dev/stderr is not there
> > > (defvar *cm-directory* "%{_builddir}/%{name}")
> > > (defvar *cm-bin-directory* "%{_builddir}/%{name}/bin/cmucl_bin/")
> > > (load "src/cm.lisp")
> > > ;;; build cffi
> > > (use-system :cffi :directory (truename "./cffi"))
> > > ;;; build portmidi
> > > (use-system :portmidi :directory (truename "./portmidi"))
> > > ;;; build osc
> > > (sb-ext:without-package-locks
> > > (use-system :osc :directory (truename "./osc")))
> > > ;;; build cm-gtk
> > > (use-system :cm-gtk :directory (truename "./cm-gtk"))
> > > (quit)
> > > EOF
> > > # move binaries away
> > > mkdir cffi-bin-cmucl
> > > mv cffi/src/*x86f cffi-bin-cmucl/
> > > mkdir portmidi-bin-cmucl
> > > mv portmidi/*.x86f portmidi-bin-cmucl/
> > > mkdir osc-bin-cmucl
> > > mv osc/*.x86f osc-bin-cmucl/
> > > mkdir cm-gtk-bin-cmucl
> > > mv cm-gtk/*.x86f cm-gtk-bin-cmucl/
> > > %endif # CMUCL
> > >
> > > # CLISP
> > > %if %{clisp_build}
> > > %{__mkdir} bin-clisp
> > > # define the clisp load program, checks for clm and cmn use-system files
> > > # we don't compile this as clisp insists on loading the requires at
> > > # compile time
> > > %{__cat} <<EOF >cm-clisp-load.lisp
> > > ;;;
> > > ;;; Clisp Common Music (CM) startup code
> > > ;;;
> > > (in-package :cl-user)
> > > ;;;
> > > ;;; Load Common Music
> > > ;;;
> > > (format t ";;;~%;;; loading Common Music %{version}...~%;;;~%")
> > > (load "%{cm_src_dir}/src/cm.lisp")
> > > ;;; load portmidi
> > > (if (probe-file "%{clisp_cm_bin_dir}/use-system-portmidi")
> > > (use-system :portmidi :directory "%{clisp_lib_dir}/portmidi/"))
> > > ;;; load osc
> > > (if (probe-file "%{clisp_cm_bin_dir}/use-system-osc")
> > > (sb-ext:without-package-locks
> > > (use-system :osc :directory "%{clisp_lib_dir}/osc/")))
> > > ;;;
> > > ;;; Load clm, new version has priority
> > > ;;;
> > > (if (probe-file "%{clisp_cm_bin_dir}/use-system-clm")
> > > (progn
> > > (format t "~%;;;~%;;; loading CLM3...~%;;;~%")
> > > (setf *package* (find-package :cm))
> > > (use-system :clm))
> > > (if (probe-file "%{clisp_cm_bin_dir}/use-system-clm2")
> > > (progn
> > > (format t "~%;;;~%;;; loading CLM2...~%;;;~%")
> > > (setf *package* (find-package :cm))
> > > (use-system :clm2))))
> > > ;;;
> > > ;;; Load cmn
> > > ;;;
> > > (if (probe-file "%{clisp_cm_bin_dir}/use-system-cmn")
> > > (progn
> > > (format t ";;;~%;;; loading CMN...~%;;;~%")
> > > (setf *package* (find-package :cm))
> > > (use-system :cmn)))
> > > ;;; initialize cm
> > > (cm)
> > > EOF
> > >
> > > # define a clisp load program with clm2 priority for
> > > # recalcitrant old timers that won't migrate to 3 :-)
> > > %{__cat} <<EOF >cm-clisp-load2.lisp
> > > ;;;
> > > ;;; Clisp Common Music (CM) startup code
> > > ;;;
> > > (in-package :cl-user)
> > > ;;;
> > > ;;; Load Common Music
> > > ;;;
> > > (format t ";;;~%;;; loading Common Music %{version}...~%;;;~%")
> > > (load "%{cm_src_dir}/src/cm.lisp")
> > > ;;; load portmidi
> > > (if (probe-file "%{clisp_cm_bin_dir}/use-system-portmidi")
> > > (use-system :portmidi :directory "%{clisp_lib_dir}/portmidi/"))
> > > ;;; load osc
> > > (if (probe-file "%{clisp_cm_bin_dir}/use-system-osc")
> > > (sb-ext:without-package-locks
> > > (use-system :osc :directory "%{clisp_lib_dir}/osc/")))
> > > ;;;
> > > ;;; Load clm2
> > > ;;;
> > > (if (probe-file "%{clisp_cm_bin_dir}/use-system-clm2")
> > > (progn
> > > (format t "~%;;;~%;;; loading CLM2...~%;;;~%")
> > > (setf *package* (find-package :cm))
> > > (use-system :clm2)))
> > > ;;;
> > > ;;; Load cmn
> > > ;;;
> > > (if (probe-file "%{clisp_cm_bin_dir}/use-system-cmn")
> > > (progn
> > > (format t ";;;~%;;; loading CMN...~%;;;~%")
> > > (setf *package* (find-package :cm))
> > > (use-system :cmn)))
> > > ;;; initialize cm
> > > (cm)
> > > EOF
> > >
> > > # build cm
> > > /usr/bin/clisp <<EOF
> > > (in-package :cl-user)
> > > (setf *compile-print* nil)
> > > (defvar *cm-directory* "%{_builddir}/%{name}")
> > > (defvar *cm-bin-directory* "%{_builddir}/%{name}/bin/clisp_bin/")
> > > ;;; clisp wants an absolute path here
> > > (load "%{_builddir}/%{name}/src/cm.lisp")
> > > ;;; build cffi
> > > (use-system :cffi :directory (truename "./cffi/"))
> > > ;;; build portmidi
> > > (use-system :portmidi :directory (truename "./portmidi/"))
> > > ;;; build osc
> > > (sb-ext:without-package-locks
> > > (use-system :osc :directory (truename "./osc/")))
> > > (quit)
> > > EOF
> > >
> > > # move binaries away
> > > mkdir cffi-bin-clisp
> > > mv cffi/src/*fas cffi-bin-clisp/
> > > mkdir portmidi-bin-clisp
> > > mv portmidi/*fas portmidi-bin-clisp/
> > > mkdir osc-bin-clisp
> > > mv osc/*fas osc-bin-clisp/
> > > %endif # CLISP
> > >
> > > %install
> > > %{__rm} -rf %{buildroot}
> > > %{__mkdir} -p %{buildroot}%{_bindir}
> > > %{__mkdir} -p %{buildroot}%{_docdir}
> > > %{__mkdir} -p %{buildroot}%{cm_src_dir}
> > >
> > > # copy the whole cm original source tree, includes cffi and friends if applicable
> > > (cd %{_builddir}/%{name}; %{__tar} cf - *)|(cd %{buildroot}%{cm_src_dir}; %{__tar} xpf -)
> > >
> > > # common to ALL lisps
> > > %if "%{sbcl_build}" == "1" || "%{cmucl_build}" == "1" || "%{clisp_build}" == "1"
> > > # patch the runtime cm.asd to include hardwired paths for source and binaries
> > > (cd %{buildroot}%{cm_src_dir}; patch -p0 <%{PATCH0})
> > > # replace the templates patched in with the real paths
> > > # (this indirection exists so the patch is independent of potential changes in the paths)
> > > %{__perl} -p -i -e "s|CMSOURCEDIR|%{cm_src_dir}/|" %{buildroot}%{cm_src_dir}/cm.asd
> > > %{__perl} -p -i -e "s|CMSBCLBINDIR|%{sbcl_cm_bin_dir}/|" %{buildroot}%{cm_src_dir}/cm.asd
> > > %{__perl} -p -i -e "s|CMCMUCLBINDIR|%{cmucl_cm_bin_dir}/|" %{buildroot}%{cm_src_dir}/cm.asd
> > > %{__perl} -p -i -e "s|CMCLISPBINDIR|%{clisp_cm_bin_dir}/|" %{buildroot}%{cm_src_dir}/cm.asd
> > > # patch cm.asd to account for a "clm2" system present on cmucl and clisp only
> > > %{__perl} -p -i -e "s|\(when \(member name '\(\"clm\" \"cmn\"|\(when \(member name '\(\"clm\" \"cmn\" \#\+\(or cmu clisp\) \"clm2\"|" %{buildroot}%{cm_src_dir}/cm.asd
> > > %endif
> > >
> > > # SBCL
> > > %if %{sbcl_build}
> > > %{__mkdir} -p %{buildroot}%{sbcl_cm_bin_dir}
> > >
> > > # install common music binaries in target directory
> > > %if "%{fasldir}" != ""
> > > %{__mv} %{fasldir}/bin/sbcl_*/* %{buildroot}%{sbcl_cm_bin_dir}
> > > %else
> > > %{__mv} %{buildroot}%{cm_src_dir}/bin/sbcl_*/* %{buildroot}%{sbcl_cm_bin_dir}
> > > %endif
> > > # make sure they have a later date than the source
> > > touch %{buildroot}%{sbcl_cm_bin_dir}/*
> > > # make link to binaries for cm.sh
> > > DNAME=`basename %{buildroot}%{cm_src_dir}/bin/sbcl_*`
> > > rmdir %{buildroot}%{cm_src_dir}/bin/sbcl_*
> > > %{__ln_s} %{sbcl_cm_bin_dir} %{buildroot}%{cm_src_dir}/bin/${DNAME}
> > > %if "%{midishare}" == "1"
> > > # install midishare binaries in target directory
> > > %{__mv} %{buildroot}%{cm_src_dir}/src/midishare/*x86f %{buildroot}%{sbcl_cm_bin_dir}
> > > %endif
> > >
> > > # create the use-system files (no clm2 under sbcl)
> > > touch %{buildroot}%{sbcl_cm_bin_dir}/use-system-clm
> > > touch %{buildroot}%{sbcl_cm_bin_dir}/use-system-cmn
> > >
> > > # install the initial load program
> > > %{__mv} cm-sbcl-load.fasl %{buildroot}%{sbcl_cm_bin_dir}/cm-load.fasl
> > >
> > > # the cm startup script
> > > %{__cat} <<EOF >%{buildroot}%{_bindir}/cm-sbcl
> > > #!/bin/bash
> > > # CM startup script for SBCL
> > > exec /usr/bin/sbcl --load "%{sbcl_cm_bin_dir}/cm-load" --eval "(cm)" \$@
> > > EOF
> > > %{__chmod} 0755 %{buildroot}%{_bindir}/cm-sbcl
> > >
> > > # install cffi, both source and binaries are needed
> > > %{__mkdir_p} %{buildroot}%{sbcl_lib_dir}/cffi/src
> > > %{__cp} -p cffi/cffi.asd %{buildroot}%{sbcl_lib_dir}/cffi/
> > > %{__mv} cffi-bin-sbcl/* %{buildroot}%{sbcl_lib_dir}/cffi/src/
> > > %{__cp} -p cffi/src/* %{buildroot}%{sbcl_lib_dir}/cffi/src/
> > > if [ -d "%{buildroot}%{cm_src_dir}/cffi" ] ; then
> > > %{__mv} %{buildroot}%{cm_src_dir}/cffi %{buildroot}%{cl_src_dir}/
> > > fi
> > >
> > > # install portmidi, both source and binaries are needed
> > > %{__mkdir_p} %{buildroot}%{sbcl_lib_dir}/portmidi
> > > %{__cp} -p portmidi/*lisp portmidi/portmidi* %{buildroot}%{sbcl_lib_dir}/portmidi/
> > > %{__mv} portmidi-bin-sbcl/* %{buildroot}%{sbcl_lib_dir}/portmidi/
> > > if [ -d "%{buildroot}%{cm_src_dir}/portmidi" ] ; then
> > > %{__mv} %{buildroot}%{cm_src_dir}/portmidi %{buildroot}%{cl_src_dir}/
> > > fi
> > > touch %{buildroot}%{sbcl_cm_bin_dir}/use-system-portmidi
> > >
> > > # install osc, both source and binaries are needed
> > > %{__mkdir_p} %{buildroot}%{sbcl_lib_dir}/osc
> > > %{__cp} -p osc/*lisp osc/osc* %{buildroot}%{sbcl_lib_dir}/osc/
> > > %{__mv} osc-bin-sbcl/* %{buildroot}%{sbcl_lib_dir}/osc/
> > > if [ -d "%{buildroot}%{cm_src_dir}/osc" ] ; then
> > > %{__mv} %{buildroot}%{cm_src_dir}/osc %{buildroot}%{cl_src_dir}/
> > > fi
> > > touch %{buildroot}%{sbcl_cm_bin_dir}/use-system-osc
> > >
> > > # install cm-gtk, both source and binaries are needed
> > > %{__mkdir_p} %{buildroot}%{sbcl_lib_dir}/cm-gtk
> > > %{__cp} -p cm-gtk/*lisp cm-gtk/*asd %{buildroot}%{sbcl_lib_dir}/cm-gtk/
> > > %{__mv} cm-gtk-bin-sbcl/* %{buildroot}%{sbcl_lib_dir}/cm-gtk/
> > > if [ -d "%{buildroot}%{cm_src_dir}/cm-gtk" ] ; then
> > > %{__mv} %{buildroot}%{cm_src_dir}/cm-gtk %{buildroot}%{cl_src_dir}/
> > > fi
> > > touch %{buildroot}%{sbcl_cm_bin_dir}/use-system-cm-gtk
> > >
> > > # install rts, both source and binaries are needed
> > > %{__mkdir_p} %{buildroot}%{sbcl_lib_dir}/rts
> > > %{__cp} -p rts/*lisp rts/*asd %{buildroot}%{sbcl_lib_dir}/rts/
> > > %{__mv} rts-bin-sbcl/* %{buildroot}%{sbcl_lib_dir}/rts/
> > > if [ -d "%{buildroot}%{cm_src_dir}/rts" ] ; then
> > > %{__mv} %{buildroot}%{cm_src_dir}/rts %{buildroot}%{cl_src_dir}/
> > > fi
> > > touch %{buildroot}%{sbcl_cm_bin_dir}/use-system-rts
> > >
> > > # install fomus, both source and binaries are needed
> > > %{__mkdir_p} %{buildroot}%{sbcl_lib_dir}/fomus
> > > %{__cp} -p fomus/*lisp fomus/*asd %{buildroot}%{sbcl_lib_dir}/fomus/
> > > %{__mv} fomus-bin-sbcl/* %{buildroot}%{sbcl_lib_dir}/fomus/
> > > if [ -d "%{buildroot}%{cm_src_dir}/fomus" ] ; then
> > > %{__mv} %{buildroot}%{cm_src_dir}/fomus %{buildroot}%{cl_src_dir}/
> > > fi
> > > touch %{buildroot}%{sbcl_cm_bin_dir}/use-system-fomus
> > >
> > > # remove stray binary directories from source tree
> > > %{__rm} -rf %{buildroot}%{cm_src_dir}/*-bin-sbcl/
> > > %endif
> > >
> > > # CMUCL
> > > %if %{cmucl_build}
> > > %{__mkdir} -p %{buildroot}%{cmucl_cm_bin_dir}
> > >
> > > # install common music binaries in target directory
> > > %{__mv} %{buildroot}%{cm_src_dir}/bin/cmucl_*/* %{buildroot}%{cmucl_cm_bin_dir}
> > > # make sure they have a later date than the source
> > > touch %{buildroot}%{cmucl_cm_bin_dir}/*
> > > # make link to binaries for cm.sh
> > > # rmdir %{buildroot}%{cm_src_dir}/bin/cmucl_%{cmucl_orig_ver}_*
> > > %{__ln_s} %{cmucl_cm_bin_dir} %{buildroot}%{cm_src_dir}/bin/cmucl_%{cmucl_orig_ver}_linux-i686
> > > %if "%{midishare}" == "1"
> > > # install midishare binaries in target directory
> > > %{__mv} %{buildroot}%{cm_src_dir}/src/midishare/*x86f %{buildroot}%{cmucl_cm_bin_dir}
> > > %endif
> > >
> > > # create the use-system files
> > > touch %{buildroot}%{cmucl_cm_bin_dir}/use-system-clm2
> > > touch %{buildroot}%{cmucl_cm_bin_dir}/use-system-clm
> > > touch %{buildroot}%{cmucl_cm_bin_dir}/use-system-cmn
> > >
> > > # install the initial load program
> > > %{__cp} -p cm-cmucl-load.lisp %{buildroot}%{cmucl_cm_bin_dir}/cm-load.lisp
> > > # install the loader with clm2 priority
> > > %{__cp} -p cm-cmucl-load2.lisp %{buildroot}%{cmucl_cm_bin_dir}/cm-load2.lisp
> > >
> > > # the cm startup script
> > > %{__cat} <<EOF >%{buildroot}%{_bindir}/cm-cmucl
> > > #!/bin/bash
> > > # CM startup script for CMUCL
> > > exec /usr/bin/lisp -load "%{cmucl_cm_bin_dir}/cm-load.lisp" -eval "(cm)" $@
> > > EOF
> > > %{__chmod} 0755 %{buildroot}%{_bindir}/cm-cmucl
> > >
> > > # cm startup script for clm2
> > > %{__cat} <<EOF >%{buildroot}%{_bindir}/cm-clm2-cmucl
> > > #!/bin/bash
> > > # CM startup script for CMUCL for clm2
> > > exec /usr/bin/lisp -load "%{cmucl_cm_bin_dir}/cm-load2.lisp" -eval "(cm)" $@
> > > EOF
> > > %{__chmod} 0755 %{buildroot}%{_bindir}/cm-clm2-cmucl
> > >
> > > # install cffi, both source and binaries are needed
> > > %{__mkdir_p} %{buildroot}%{cmucl_lib_dir}/cffi/src
> > > %{__cp} -p cffi/cffi.asd %{buildroot}%{cmucl_lib_dir}/cffi/
> > > %{__mv} cffi-bin-cmucl/* %{buildroot}%{cmucl_lib_dir}/cffi/src/
> > > %{__cp} -p cffi/src/* %{buildroot}%{cmucl_lib_dir}/cffi/src/
> > > if [ -d "%{buildroot}%{cm_src_dir}/cffi" ] ; then
> > > %{__mv} %{buildroot}%{cm_src_dir}/cffi %{buildroot}%{cl_src_dir}/
> > > fi
> > >
> > > # install portmidi, both source and binaries are needed
> > > %{__mkdir_p} %{buildroot}%{cmucl_lib_dir}/portmidi
> > > %{__cp} -p portmidi/portmidi* %{buildroot}%{cmucl_lib_dir}/portmidi/
> > > %{__mv} portmidi-bin-cmucl/* %{buildroot}%{cmucl_lib_dir}/portmidi/
> > > if [ -d "%{buildroot}%{cm_src_dir}/portmidi" ] ; then
> > > %{__mv} %{buildroot}%{cm_src_dir}/portmidi %{buildroot}%{cl_src_dir}/
> > > fi
> > > touch %{buildroot}%{cmucl_cm_bin_dir}/use-system-portmidi
> > >
> > > # install osc, both source and binaries are needed
> > > %{__mkdir_p} %{buildroot}%{cmucl_lib_dir}/osc
> > > %{__cp} -p osc/osc* %{buildroot}%{cmucl_lib_dir}/osc/
> > > %{__mv} osc-bin-cmucl/* %{buildroot}%{cmucl_lib_dir}/osc/
> > > if [ -d "%{buildroot}%{cm_src_dir}/osc" ] ; then
> > > %{__mv} %{buildroot}%{cm_src_dir}/osc %{buildroot}%{cl_src_dir}/
> > > fi
> > > touch %{buildroot}%{cmucl_cm_bin_dir}/use-system-osc
> > >
> > > # install cm-gtk, both source and binaries are needed
> > > %{__mkdir_p} %{buildroot}%{cmucl_lib_dir}/cm-gtk
> > > %{__cp} -p cm-gtk/*lisp cm-gtk/*asd %{buildroot}%{cmucl_lib_dir}/cm-gtk/
> > > %{__mv} cm-gtk-bin-cmucl/* %{buildroot}%{cmucl_lib_dir}/cm-gtk/
> > > if [ -d "%{buildroot}%{cm_src_dir}/cm-gtk" ] ; then
> > > %{__mv} %{buildroot}%{cm_src_dir}/cm-gtk %{buildroot}%{cl_src_dir}/
> > > fi
> > > touch %{buildroot}%{cmucl_cm_bin_dir}/use-system-cm-gtk
> > >
> > > # remove stray binary directories from source tree
> > > %{__rm} -rf %{buildroot}%{cm_src_dir}/*-bin-cmucl/
> > > %endif
> > >
> > > # CLISP
> > > %if %{clisp_build}
> > > %{__mkdir} -p %{buildroot}%{clisp_cm_bin_dir}
> > >
> > > # move all the binaries except .lib files (which confuse the clm and cmn requires)
> > > find %{buildroot}%{cm_src_dir}/bin/clisp_* -type f ! -name \*.lib -exec mv {} %{buildroot}%{clisp_cm_bin_dir} \;
> > > # make sure they have a later date than the source
> > > touch %{buildroot}%{clisp_cm_bin_dir}/*
> > > # make link to binaries for cm.sh
> > > %{__rm} -f %{buildroot}%{cm_src_dir}/bin/clisp_*/*.lib
> > > rmdir %{buildroot}%{cm_src_dir}/bin/clisp_*
> > > %{__ln_s} %{clisp_cm_bin_dir}/ %{buildroot}%{cm_src_dir}/bin/clisp_%{clisp_orig_ver}_linux-i686
> > >
> > > # create the use-system files
> > > touch %{buildroot}%{clisp_cm_bin_dir}/use-system-clm2
> > > touch %{buildroot}%{clisp_cm_bin_dir}/use-system-cmn
> > > %if %{clm_clisp}
> > > touch %{buildroot}%{clisp_cm_bin_dir}/use-system-clm
> > > %endif
> > >
> > > # install the load program, we install the lisp source as we cannot
> > > # compile it, clisp insists on loading the requires at compile time.
> > > %{__cp} -p cm-clisp-load.lisp %{buildroot}%{clisp_cm_bin_dir}/cm-load.lisp
> > > # install the loader with clm2 priority
> > > %{__cp} -p cm-clisp-load2.lisp %{buildroot}%{clisp_cm_bin_dir}/cm-load2.lisp
> > >
> > > # the cm startup script
> > > %{__cat} <<EOF >%{buildroot}%{_bindir}/cm-clisp
> > > #!/bin/bash
> > > # CM startup script for CLISP
> > > exec /usr/bin/clisp -I -i %{clisp_cm_bin_dir}/cm-load.lisp -p "CM" $@
> > > EOF
> > > %{__chmod} 0755 %{buildroot}%{_bindir}/cm-clisp
> > >
> > > # cm startup script for clm2
> > > %{__cat} <<EOF >%{buildroot}%{_bindir}/cm-clm2-clisp
> > > #!/bin/bash
> > > # CM startup script for CLISP for clm2
> > > exec /usr/bin/clisp -I -i %{clisp_cm_bin_dir}/cm-load2.lisp -p "CM" $@
> > > EOF
> > > %{__chmod} 0755 %{buildroot}%{_bindir}/cm-clm2-clisp
> > >
> > > # install cffi, both source and binaries are needed
> > > %{__mkdir_p} %{buildroot}%{clisp_lib_dir}/cffi/src
> > > %{__cp} -p cffi/cffi.asd %{buildroot}%{clisp_lib_dir}/cffi/
> > > %{__mv} cffi-bin-clisp/* %{buildroot}%{clisp_lib_dir}/cffi/src/
> > > %{__cp} -p cffi/src/* %{buildroot}%{clisp_lib_dir}/cffi/src/
> > > if [ -d "%{buildroot}%{cm_src_dir}/cffi" ] ; then
> > > %{__mv} %{buildroot}%{cm_src_dir}/cffi %{buildroot}%{cl_src_dir}/
> > > fi
> > >
> > > # install portmidi, both source and binaries are needed
> > > %{__mkdir_p} %{buildroot}%{clisp_lib_dir}/portmidi
> > > %{__cp} -p portmidi/portmidi* %{buildroot}%{clisp_lib_dir}/portmidi/
> > > %{__mv} portmidi-bin-clisp/* %{buildroot}%{clisp_lib_dir}/portmidi/
> > > if [ -d "%{buildroot}%{cm_src_dir}/portmidi" ] ; then
> > > %{__mv} %{buildroot}%{cm_src_dir}/portmidi %{buildroot}%{cl_src_dir}/
> > > fi
> > > touch %{buildroot}%{clisp_cm_bin_dir}/use-system-portmidi
> > >
> > > # install osc, both source and binaries are needed
> > > %{__mkdir_p} %{buildroot}%{clisp_lib_dir}/osc
> > > %{__cp} -p osc/osc* %{buildroot}%{clisp_lib_dir}/osc/
> > > %{__mv} osc-bin-clisp/* %{buildroot}%{clisp_lib_dir}/osc/
> > > if [ -d "%{buildroot}%{cm_src_dir}/osc" ] ; then
> > > %{__mv} %{buildroot}%{cm_src_dir}/osc %{buildroot}%{cl_src_dir}/
> > > fi
> > > touch %{buildroot}%{clisp_cm_bin_dir}/use-system-osc
> > > %endif # CLISP
> > >
> > > # get rid of CVS stuff
> > > CVSDIRS=`find %{buildroot}%{cm_src_dir} -type d -name CVS`
> > > if [ ! -z "${CVSDIRS}" ] ; then
> > > for DIR in ${CVSDIRS} ; do
> > > %{__rm} -rf ${DIR}
> > > done
> > > fi
> > >
> > > %clean
> > > %{__rm} -rf %{buildroot}
> > >
> > > %files
> > > %defattr(-,root,root,-)
> > > %doc
> > > %{cm_src_dir}
> > > %if %{sbcl_build}
> > > %{cl_src_dir}/cffi
> > > %{cl_src_dir}/portmidi
> > > %{cl_src_dir}/osc
> > > %{cl_src_dir}/cm-gtk
> > > %{cl_src_dir}/rts
> > > %endif
> > > %if %{cmucl_build}
> > > %{cl_src_dir}/cffi
> > > %{cl_src_dir}/portmidi
> > > %{cl_src_dir}/osc
> > > %{cl_src_dir}/cm-gtk
> > > %exclude %{cm_src_dir}/bin/cmucl_%{cmucl_orig_ver}_linux-i686
> > > %endif
> > > %if %{clisp_build}
> > > %{cl_src_dir}/cffi
> > > %{cl_src_dir}/portmidi
> > > %{cl_src_dir}/osc
> > > %exclude %{cm_src_dir}/bin/clisp_%{clisp_orig_ver}_linux-i686
> > > %endif
> > >
> > > %if %{cmucl_build}
> > > %files cmucl
> > > %defattr(-,root,root,-)
> > > %{_bindir}/cm-cmucl
> > > %{cmucl_cm_bin_dir}
> > > %exclude %{cmucl_cm_bin_dir}/cm-load2.lisp
> > > %exclude %{cmucl_cm_bin_dir}/use-system-clm
> > > %exclude %{cmucl_cm_bin_dir}/use-system-cmn
> > > %exclude %{cmucl_cm_bin_dir}/use-system-clm2
> > > %{cmucl_lib_dir}/cffi
> > > %{cmucl_lib_dir}/portmidi
> > > %{cmucl_cm_bin_dir}/use-system-portmidi
> > > %{cmucl_lib_dir}/osc
> > > %{cmucl_cm_bin_dir}/use-system-osc
> > > %{cmucl_lib_dir}/cm-gtk
> > > %{cmucl_cm_bin_dir}/use-system-cm-gtk
> > > %{cm_src_dir}/bin/cmucl_%{cmucl_orig_ver}_linux-i686
> > >
> > > %files clm2-cmucl
> > > %defattr(-,root,root,-)
> > > %{_bindir}/cm-clm2-cmucl
> > > %{cmucl_cm_bin_dir}/cm-load2.lisp
> > > %{cmucl_cm_bin_dir}/use-system-clm2
> > >
> > > %files clm-cmucl
> > > %defattr(-,root,root,-)
> > > %{cmucl_cm_bin_dir}/use-system-clm
> > >
> > > %files cmn-cmucl
> > > %defattr(-,root,root,-)
> > > %{cmucl_cm_bin_dir}/use-system-cmn
> > > %endif
> > >
> > > %if %{clisp_build}
> > > %files clisp
> > > %defattr(-,root,root,-)
> > > %{clisp_cm_bin_dir}
> > > %{_bindir}/*clisp
> > > %exclude %{clisp_cm_bin_dir}/cm-load2.lisp
> > > %exclude %{clisp_cm_bin_dir}/use-system-cmn
> > > %exclude %{clisp_cm_bin_dir}/use-system-clm2
> > > %if %{clm_clisp}
> > > %exclude %{clisp_cm_bin_dir}/use-system-clm
> > > %endif
> > > %{clisp_lib_dir}/cffi
> > > %{clisp_lib_dir}/portmidi
> > > %{clisp_cm_bin_dir}/use-system-portmidi
> > > %{clisp_lib_dir}/osc
> > > %{clisp_cm_bin_dir}/use-system-osc
> > > %{cm_src_dir}/bin/clisp_%{clisp_orig_ver}_linux-i686
> > >
> > > %files clm2-clisp
> > > %defattr(-,root,root,-)
> > > %{_bindir}/cm-clm2-clisp
> > > %{clisp_cm_bin_dir}/cm-load2.lisp
> > > %{clisp_cm_bin_dir}/use-system-clm2
> > >
> > > %if %{clm_clisp}
> > > %files clm-clisp
> > > %defattr(-,root,root,-)
> > > %{clisp_cm_bin_dir}/use-system-clm
> > > %endif
> > >
> > > %files cmn-clisp
> > > %defattr(-,root,root,-)
> > > %{clisp_cm_bin_dir}/use-system-cmn
> > > %endif
> > >
> > > %if %{sbcl_build}
> > > %files sbcl
> > > %defattr(-,root,root,-)
> > > %{sbcl_cm_bin_dir}
> > > %{_bindir}/*sbcl
> > > %exclude %{sbcl_cm_bin_dir}/use-system-clm
> > > %exclude %{sbcl_cm_bin_dir}/use-system-cmn
> > > %exclude %{sbcl_cm_bin_dir}/use-system-fomus
> > > %{sbcl_lib_dir}/cffi
> > > %{sbcl_lib_dir}/portmidi
> > > %{sbcl_cm_bin_dir}/use-system-portmidi
> > > %{sbcl_lib_dir}/osc
> > > %{sbcl_cm_bin_dir}/use-system-osc
> > > %{sbcl_lib_dir}/cm-gtk
> > > %{sbcl_cm_bin_dir}/use-system-cm-gtk
> > > %{sbcl_lib_dir}/rts
> > > %{sbcl_cm_bin_dir}/use-system-rts
> > >
> > > %files clm-sbcl
> > > %defattr(-,root,root,-)
> > > %{sbcl_cm_bin_dir}/use-system-clm
> > >
> > > %files cmn-sbcl
> > > %defattr(-,root,root,-)
> > > %{sbcl_cm_bin_dir}/use-system-cmn
> > >
> > > %files fomus
> > > %defattr(-,root,root,-)
> > > %doc fomus/doc fomus/CHANGELOG fomus/COPYING fomus/README fomus/TODO
> > > %{cl_src_dir}/fomus
> > >
> > > %files fomus-sbcl
> > > %defattr(-,root,root,-)
> > > %{sbcl_lib_dir}/fomus
> > > %{sbcl_cm_bin_dir}/use-system-fomus
> > > %endif
> > >
> > >
> > > %changelog
> > > * Wed Dec 3 2008 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu> 2.11.0-0.20070402.cvs.10
> > > - updated versions for new sbcl on fc10
> > >
> > > * Mon Dec 1 2008 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu> 2.11.0-0.20070402.cvs.9
> > > - updated sbcl version for Fedora 8 to 1.0.22 (same for x86_64 in fc9)
> > >
> > > * Thu Nov 27 2008 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu> 2.11.0-0.20070402.cvs.9
> > > - on the sbcl that ships with fc10 the common-lisp-controller writes
> > > compiled files to the cache directory, so create a fasldir define
> > > to compensate for that, but only on i386 (!)
> > > - updated fomus to 0.2.28
> > >
> > > * Wed Nov 26 2008 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu> 2.11.0-0.20070402.cvs.9
> > > - update lisp versions on fc9, rebuild
> > >
> > > * Tue Nov 25 2008 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu>
> > > - added support for fc10
> > >
> > > * Fri Jul 4 2008 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu> 2.11.0-0.20070402.cvs.8
> > > - rebuild on f8/9 for sbcl 1.0.17 and cmucl 19e
> > >
> > > * Tue May 13 2008 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu>
> > > - added lisp versions for f9
> > >
> > > * Fri Feb 1 2008 Arnaud Gomes-do-Vale <Arnaud.Gomes at ircam.fr>
> > > - rebuilt on CentOS
> > >
> > > * Fri Jan 18 2008 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu> 2.11.0-0.20070402.cvs.7
> > > - rebuild on f7/8 for sbcl 1.0.13
> > >
> > > * Tue Dec 4 2007 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu> 2.11.0-0.20070402.cvs.6
> > > - rebuild on f7/f8 for clisp 2.43
> > >
> > > * Sun Dec 2 2007 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu> 2.11.0-0.20070402.cvs.5
> > > - updated to portmidi 2.0.2
> > > - added osc-1.0.1-sockets.patch (patch2) to fix unknown function which is
> > > otherwise defined in the sb-alien package
> > >
> > > * Fri Nov 30 2007 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu> 2.11.0-0.20070402.cvs.4
> > > - added osc tarball and support
> > > - had to disable package locks, see:
> > > http://ccrma-mail.stanford.edu/pipermail/cmdist/2007-May/004084.html
> > >
> > > * Wed Nov 14 2007 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu>
> > > - added lisp versions for f8
> > >
> > > * Tue Sep 4 2007 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu> 2.11.0-0.20070402.cvs.3
> > > - rebuild on sbcl 1.0.9/fc6
> > >
> > > * Mon Jun 11 2007 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu> 2.11.0-0.2.20070402.cvs
> > > - rebuild on sbcl 1.0.6/fc6
> > >
> > > * Tue May 8 2007 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu>
> > > - added fc7 support
> > >
> > > * Tue Apr 3 2007 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu> 2.11.0-0.1.20070402.cvs
> > > - added Fomus, for now only supported in the sbcl build. Fomus creates
> > > two additional packages that behave in the same way as the externally
> > > built clm/cmn packages (cm-fomus and cm-fomus-sbcl).
> > > - fixed library lookup paths for x86_64, tag explicit dependencies as
> > > 64 bit in x86_64
> > >
> > > * Mon Apr 2 2007 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu> 2.11.0-0.1.20070402.cvs
> > > - updated to current cvs snapshot
> > > - added rts library for sbcl build
> > > - used portmidi 2.0.0 instead of cvs, cvs does not work with current
> > > cm cvs
> > > - added explicit release dependency for sbcl to use the proper thread
> > > enabled Planet CCRMA build of sbcl
> > >
> > > * Sun Dec 18 2005 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu>
> > > - added clisp support, includes cffi and portmidi (but not cm-gtk),
> > > clisp does not support threads either.
> > >
> > > * Fri Dec 16 2005 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu>
> > > - add separate support for starting cm with clm2 instead of clm3
> > > - clisp support is completely obsolete right now
> > >
> > > * Thu Dec 15 2005 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu> 2.7.0-0.2.cvs
> > > - cvs 2005.12.15
> > > - changed autoload-* files to use-system-*, added portmidi and cm-gtk
> > > - include use-system-portmidi and use-system-cm-gtk in cm-sbcl package
> > > so that they are always started, include .so requirements for portmidi
> > > and gtk2 in cm-sbcl
> > > - propagated changes to cmucl build
> > >
> > > * Wed Dec 14 2005 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu>
> > > - added cffi (sbcl)
> > > - added portmidi (sbcl)
> > > - added cm-gtk (sbcl)
> > >
> > > * Mon Dec 12 2005 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu>
> > > - started building new 2.7.x cvs package, see:
> > > http://commonmusic.sourceforge.net/doc/install.html
> > > export CVSROOT=":pserver:anonymous at cvs.sourceforge.net:/cvsroot/commonmusic"
> > > cvs login
> > > cvs checkout -P cm
> > >
> > > * Sat Jan 7 2005 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu>
> > > - fixed file lists and build to include full name of cmucl and clisp
> > > binary directories, otherwise the links are not found
> > > - do not generate the clm-clisp package (clm3 does not run in clisp)
> > >
> > > * Thu Dec 30 2004 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu>
> > > - spec file cleanups
> > >
> > > * Sun Nov 7 2004 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu>
> > > - added clm2 autoload for cmucl and clisp
> > > - fix exported clm symbols for clm3
> > >
> > > * Wed Nov 3 2004 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu> 2.4.2-3
> > > - rebuild for new version of base lisps
> > > - we need to split the release numbering for the different lisps
> > >
> > > * Wed May 12 2004 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu>
> > > - added buildrequires
> > >
> > > * Tue Feb 10 2004 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu>
> > > - added midishare-player library requires
> > >
> > > * Wed Feb 4 2004 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu>
> > > - factored (cm)(clm) initialization for cmucl in one function (cm-init),
> > > FC1 command line parsing was barfing on -eval when lisp code in the
> > > command line had spaces in it.
> > >
> > > * Tue Feb 3 2004 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu>
> > > - clisp: suppress redefinition warnings during load
> > >
> > > * Mon Feb 2 2004 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu> 2.4.2-1
> > > - updated to final 2.4.2 release
> > >
> > > * Sat Jan 17 2004 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu> 2.4.1-1.cvs
> > > - switched to separate packages for CM/CLM/CMN but we are keeping in
> > > this package the changelog for the old combined cm-clm-cmn package
> > > - added midishare support for CMUCL
> > >
> > > * Tue Dec 16 2003 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu> 2003.12.16
> > > - updated to clm 2 of 12/15/2003
> > > - added PreReq's to avoid out of order installs with apt (you have to
> > > have the matching cmucl installed before installing clm and rebuilding
> > > the ffi interface)
> > >
> > > * Thu Dec 11 2003 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu> 2003.11.18
> > > - added new requirements for cmucl under 7.3
> > > - had to disable midishare when building under cmucl-3.1.4 on 7.3
> > >
> > > * Sat Nov 15 2003 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu> 2003.11.04
> > > - removed old cm 2.3.4 source and "newcm" define
> > > - added patch for jack feature
> > > - removed old patches for cm
> > >
> > > * Thu Nov 11 2003 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu> 2003.11.04
> > > - added new alsa api patch for sndlib in clm-2
> > >
> > > * Sun Nov 9 2003 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu> 2003.11.04
> > > - started versioning with release date
> > >
> > > * Tue Aug 19 2003 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu> 1.0-21
> > > - fixed dependency order for installs of the source packages, changed
> > > the :Requires to PreReq: tags. "Requires" should also order packages
> > > correctly at install time but it does not (at least when invoqued
> > > through apt).
> > >
> > > * Thu Aug 14 2003 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu> 1.0-20
> > > - updated to clm of 08/18/2003, cm 2.4.0 of 06/28/2003, cmn of 08/15/2003
> > > - added release tags, did not change the doc directory name for cm/clm/cmn
> > >
> > > * Wed Mar 19 2003 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu> 1.0-18
> > > - updated to clm of 03/19/2003, cm 2.4.0 of 03/19/2003
> > >
> > > * Tue Jan 7 2003 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu> 1.0-18
> > > - updated to clm/cmn of 03/10/2003, cm 2.4.0 of 03/10/2003
> > >
> > > * Tue Jan 7 2003 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu> 1.0-16
> > > - updated to clm/cmn of 01/07/2003, cm 2.4.0 of 01/02/2003
> > > - split source code into separate packages so that clisp and cmucl
> > > installs can coexist, require the packages in the binary packages
> > >
> > > * Tue Dec 23 2002 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu> 1.0-15
> > > - more reorganization of the internals, new startup scripts
> > >
> > > * Fri Dec 20 2002 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu> 1.0-15
> > > - cmucl cores now stored in /usr/lib/cmucl
> > > - rearranged directory structure to match clisp and cmucl
> > > - create hack (see SOURCE4) to load cmn shared library for xcmnw
> > >
> > > * Thu Dec 19 2002 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu> 1.0-15
> > > - updated to cm 2.4.0 of 12/19/2002, clm-2 of 12/18/2002 and cmn of
> > > 12/08/2002
> > > - changed location of sources to /usr/share/lisp/src
> > >
> > > * Tue Oct 29 2002 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu> 1.0-13
> > > - updated to clm of 10/21/2002, cmn of 10/22/2002
> > > - added compilation of the cmn viewer (xcmnw)
> > >
> > > * Wed Aug 28 2002 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu> 1.0-12
> > > - updated to clm of 08/28/2002, cmn of 07/30/2002
> > > - added workaround for clm under cmucl bug. When a clm cmucl package
> > > is used on a different machine from the one it was compiled in there
> > > is a small chance of the foreign function interface misbehaving and
> > > an error happening on startup. I observed this bug when crossing
> > > processor family boundaries. For example, a cmucl-clm package compiled
> > > on a Pentium III would work on Athlons, Pentium IVs and some Pentium IIs
> > > (Deschutes), but it would not work on Pentium Pros and some Pentium IIs
> > > (Klamath). Very weird. The workaround involves recompiling the ffi.lisp
> > > files at install time and reloading this customized version on startup.
> > >
> > > * Sat Jul 20 2002 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu> 1.0-11
> > > - updated to clm of 07/23/2002
> > >
> > > * Sat Jul 20 2002 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu> 1.0-10
> > > - updated to clm of 07/20/2002 (with fix for cmucl reloads)
> > >
> > > * Tue Jul 16 2002 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu> 1.0-9.1
> > > - add require for gcc, clm would not be useful without that
> > >
> > > * Sun Jul 14 2002 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu> 1.0-9
> > > - updated to cmn and clm of 07/14/2002
> > > - more tweaks to the post scripts
> > >
> > > * Wed Jul 3 2002 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu> 1.0-8.1
> > > - fixed post and preun for cmucl, was not working for upgrades
> > >
> > > * Tue Jul 02 2002 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu> 1.0-8
> > > - updated to clm-2 of 06/27/2002, cmn of 06/29/2002
> > >
> > > * Thu Jun 20 2002 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu> 1.0-7
> > > - downloaded cm documentation patches for 2.3.4, added to setup
> > >
> > > * Sun Jun 16 2002 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu>
> > > - alsa 0.5 no longer supported
> > > - change package naming, alsa no suffix, oss with "-oss" suffix
> > > - new versions of clm/cm/cmn
> > >
> > > * Thu Sep 27 2001 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu> 1.0-6
> > > - 1.0-6 release, official cm-2.2.1, cmn 09/12/2001, clm 09/26/2001
> > > - added %%{lisp} prefix to doc directories so that both cmucl and clisp
> > > versions of a package can coexist
> > > - added trivial test scripts to verify the fm-violin can beep
> > >
> > > * Tue Sep 25 2001 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu>
> > > - changed build_oss to saner audio_api, appended all package names with
> > > the sound api so that we can have oss, alsa0.5 and alsa0.9 packages
> > > - new, improved cm-2.2.1
> > > - added clm and cmn dates to package information
> > >
> > > * Fri Sep 21 2001 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu> 1.0-5
> > > - tried cm-2.2.1
> > > - added support to build cm and cmn under cmucl
> > > - changed naming scheme of packages: version number is no longer included
> > > in the name of the package, otherwise it is not possible to easily
> > > upgrade a package when there are major version number changes. This
> > > means it is not possible to know which version of, let's say, cm, is
> > > inside a package but I can't see a way around. The version info has
> > > been added to the Summary and Description fields of the package.
> > > - added cm-clm-cmn-build script in SOURCES, rebuilds all binary rpms,
> > > uses environment variables to control internal build options
> > > - added workaround for rpm BUG: sometimes rpm will create bad binary rpms
> > > when (apparently?) packing the big cmucl core images, so compress them
> > > before creating binaries, uncompress in a %%post and compress again in
> > > a %%preun. Arghhh... this happens in rpm 4.0.2 up to release 8 (latest
> > > I found). Could not test with preliminary 4.0.3 because it triggers
> > > a package upgrade storm.
> > >
> > > * Fri Sep 14 2001 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu> 1.0-4
> > > - fixed alsa dependencies for oss packages. Doh!
> > >
> > > - clm under clisp needs the saved-* files
> > >
> > > * Thu Sep 13 2001 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu> 1.0-3
> > > - added switches to generate oss packages
> > > - added separate sndplay package so that it does not conflict with the
> > > snd-utils package (from snd)
> > >
> > > * Wed Sep 12 2001 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu> 1.0-2
> > > - cmn.tar.gz: Sep 12 2001
> > > - clm-2.tar.gz: Sep 10 2001
> > > - added sndplay to /usr/lib/lisp/bin
> > >
> > > * Tue Sep 11 2001 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu>
> > > - added proper logical startup path to cm
> > > - added all current patches to cm
> > > - changed package naming
> > >
> > > * Sun Sep 9 2001 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu>
> > > - changed to /usr/lib/lisp as base directory, renamed scripts so that
> > > both clisp and cmucl versions can be installed at the same time
> > > - added cmn build, package cm-clm-cmn
> > > - the clm package has the real clm version, composite packages (cm-clm and
> > > cm-clm-cmn) have an arbitrary version of 1.0, the name of the
> > > package contains the version number of the programs that it
> > > contains. The revision reflects the version of the underlying spec
> > > file.
> > >
> > > * Fri Sep 7 2001 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu>
> > > - added restart-clm to the clm script for cmucl
> > > - added support for clisp
> > > - added alsa lib dependency and autodetection of api at build time
> > > - added cm support under clisp
> > >
> > > * Thu Sep 6 2001 Fernando Lopez-Lezcano <nando at ccrma.stanford.edu>
> > > - cmucl clm build.
> >
> > _______________________________________________
> > PlanetCCRMA mailing list
> > PlanetCCRMA at ccrma.stanford.edu
> > http://ccrma-mail.stanford.edu/mailman/listinfo/planetccrma
More information about the PlanetCCRMA
mailing list