[PlanetCCRMA] HDSPe and Multiface
Fernando Lopez-Lezcano
nando at ccrma.Stanford.EDU
Wed Mar 23 14:41:51 PDT 2011
On 03/23/2011 02:09 PM, Henrik Frisk wrote:
> Hi,
>
> I just received my RME HDSPe ExpressCard and Multiface II but I'm
> having trouble getting it to work under Fedora 12. I have the relevant
> packages installed but when I run hdsploader it seams it can't see the
> card:
>
> $ hdsploader
> hdsploader - firmware loader for RME Hammerfall DSP cards
> Looking for HDSP + Multiface or Digiface cards :
> $
>
> Running dmesg gives the following:
>
> RME Hammerfall DSP 0000:06:00.0: PCI INT A -> GSI 0 (level, low) -> IRQ 0
> RME Hammerfall DSP 0000:06:00.0: setting latency timer to 64
> IRQ handler type mismatch for IRQ 0
> current handler: timer
> Pid: 605, comm: modprobe Tainted: P 2.6.34.8-68.fc13.i686.PAE #1
> Call Trace:
> [<c048467f>] __setup_irq+0x24a/0x2a8
> [<c0484abb>] request_threaded_irq+0x10f/0x16c
> [<f7489227>] ? snd_hdsp_interrupt+0x0/0x17e [snd_hdsp]
> [<f74897e8>] snd_hdsp_probe+0x2ba/0x5f4 [snd_hdsp]
> [<c05c2e9c>] local_pci_probe+0x13/0x15
> [<c05c3a6c>] pci_device_probe+0x48/0x6b
> [<c065370f>] driver_probe_device+0xca/0x1d2
> [<c065385f>] __driver_attach+0x48/0x64
> [<c0652d33>] bus_for_each_dev+0x42/0x6c
> [<c06534ff>] driver_attach+0x19/0x1b
> [<c0653817>] ? __driver_attach+0x0/0x64
> [<c0652fbf>] bus_add_driver+0xfe/0x235
> [<c05ae3df>] ? kset_find_obj+0x23/0x4e
> [<c0653aca>] driver_register+0x81/0xe2
> [<c07a5da2>] ? notifier_call_chain+0x2b/0x4d
> [<c05c3c2c>] __pci_register_driver+0x3d/0x9a
> [<c045891c>] ? __blocking_notifier_call_chain+0x45/0x51
> [<f7491000>] ? alsa_card_hdsp_init+0x0/0x19 [snd_hdsp]
> [<f7491017>] alsa_card_hdsp_init+0x17/0x19 [snd_hdsp]
> [<c040305b>] do_one_initcall+0x51/0x13f
> [<c0468f7c>] sys_init_module+0xac/0x1e0
> [<c0408c9f>] sysenter_do_call+0x12/0x28
> ALSA hdsp.c:5486: Hammerfall-DSP: unable to use IRQ 0
> RME Hammerfall DSP 0000:06:00.0: PCI INT A disabled
> RME Hammerfall DSP: probe of 0000:06:00.0 failed with error -16
It would seem that there is a problem when the card driver is
initialized, something to do with handling of the interrupt associated
with the hammerfall card.
I don't know what you could do. What happens if you run with the Planet
CCRMA kernel? (it is older but it might work).
> The computer is an Apple MacBook Pro 5,2
Hmmm, I'm not familiar with running on Apple hardware, I imagine there
are no bios-equivalent tweaks you can do, right?
BTW, I'm running an hdspe + multiface on Fedora 13 with the Planet CCRMA
rt kernel (on a Lenovo laptop).
-- Fernando
More information about the PlanetCCRMA
mailing list