Hi, list.<br><br>Sean here in Japan. It's been a while since I've hit up the list. I have been in the Tokyo area the whole time, so the tsunami and Fukushima were never a worry for me, but it has been very stressful. >From the moment the nuclear plants in Fukushima had problems I have been able to check radiation levels from Geiger counters online that the general public had no knowledge of and then by the second week the local hacker community had quite a few setup and were also compiling numbers with all sorts of mashups, so I have known most the time that we have been relatively safe with very low levels of radiation. In fact, places in the U.S. have higher levels naturally just from natural radon from the ground. Where I am, Yokohama, the drinking water is sourced from Yamanashi, which is not where Tokyo gets it's water, and didn't see the low levels of iodine-131 that Tokyo's water was seeing. However, unlike my ability to check with my own eyes the radiation levels in the air in the Tokyo area, I have to completely put my faith in the Japanese government on the safety of water and food. If you look back some companies and the government have has some questionable history in some exposure to radiation in the past. Anyway, that's just a little update for anyone who might have wondered and isn't what I want to ask about. ;-)<br>
<br>I finally buckled down and took on the C++-learning curve. If I keep having the free time I've had, another week should see me on the down slop. I've started looking at the Jack API and the example code one can find on Jack's site and Wiki. Three issues have already confronted me that I'd like some thoughts on now as a newbee with the Jack API. Is this where people tell me to ask over there? :-)<br>
<br>Firstly, since I am hoping to develop editor/librarians for external hardware that will only be sending and receiving MIDI CCs and sysexec data, Is incorporating the Jack API my only option or can I do something easier with just ALSA and Jack will see it anyway? I read on the Jack Wiki that Jack doesn't handle sysexec data very well and there is even a proposal to give this some attention. <b><a href="http://tinyurl.com/midi-sysexec-proposal">http://tinyurl.com/midi-sysexec-proposal</a> </b>I want to be able to use these applications while I have Jack running and I have found you can't use the alsa utilities, if you are running Jack. Since in <font size="2">QjackCtl under the Connections everything, other than audio signals, are under the ALSA tab anymore. Has everyone dropped using Jack midi ports and Jack is making midi connections with ALSA. What is that or the difference of those? :-)<br>
<br>Secondly, I want to do this in C++ because I already have OOP in my brain and I have run into some wiki discussions about needing to use a wrapper for the best results. Considering my first question, what's the common trend on that? <br>
<br>Lastly, since Jack has some issues with sysexec information, has anyone had good luck with Jack and sysexec messages? I do send small sysexec messages, say for one or two parameter changes, without a problem in Rosegarden, but large amounts of data doesn't work so well. <br>
<br>Anyway, Thanks and I hope everyone has been well.<br><br>Sean<br><br><br></font>