[PlanetCCRMA] Self-configuring system Was:*Solved* Midisport8x8/s Was:Chasing my tail with ALSA

[Michael]

Fernando Pablo Lopez-Lezcano wrote:

>>Here is the output from modules.conf The only thing I tried was to put the
>>add options line first, to see if that would help, but it didn't seem to
>>affect the system. As far as I can tell, this system I'm on, has only one
>>active card, the SB512 PCI, and the embedded card on the motherboard has
>>been disabled in BIOS.
>>    
>>
>
>Well, you also have the midisport, right? That is a second "card". 
>
Lesson learned.

>>options ide-cd ignore='hdc hdd'
>>alias usb-controller usb-uhci
>>
>># --- Keep modules from being autocleaned ---
>>add options -k snd-card-0
>># --- BEGIN: Generated by ALSACONF, do not edit. ---
>># --- ALSACONF verion 1.0.1 ---
>>alias char-major-116 snd
>>alias char-major-14 soundcore
>>alias sound-service-0-0 snd-mixer-oss
>>alias sound-service-0-1 snd-seq-oss
>>alias sound-service-0-3 snd-pcm-oss
>>alias sound-service-0-8 snd-seq-oss
>>alias sound-service-0-12 snd-pcm-oss
>>alias snd-card-0 snd-emu10k1
>>alias sound-slot-0 snd-emu10k1
>># --- END: Generated by ALSACONF, do not edit. ---
>>    
>>
>
>You still have modules.conf configured to use only one card (that is why
>you don't see your midisport. 
>
>Try changing the alsa portion of modules.conf to this:
>
># --- BEGIN: Generated by ALSACONF, do not edit. ---
># --- ALSACONF verion 0.9.0 ---
>alias char-major-116 snd
>alias snd-card-0 snd-emu10k1
>alias snd-card-1 snd-usb-audio
># --- OSS compatibility
>alias char-major-14 soundcore
>alias sound-slot-0 snd-card-0
>alias sound-slot-1 snd-card-1
>alias sound-service-0-0 snd-mixer-oss
>alias sound-service-0-1 snd-seq-oss
>alias sound-service-0-3 snd-pcm-oss
>alias sound-service-0-8 snd-seq-oss
>alias sound-service-0-12 snd-pcm-oss
>alias sound-service-1-0 snd-mixer-oss
>alias sound-service-1-3 snd-pcm-oss
>alias sound-service-1-12 snd-pcm-oss
># --- Options
>options snd major=116 cards_limit=2 device_mode=0666
>options snd-emu10k1 index=0
>options snd-usb-audio index=1
># --- Keep modules from being autocleaned
>add options -k snd-card-0
>add options -k snd-card-1
>
>Do a "/sbin/depmod -a" after changing it and restart the alsa driver:
>  /etc/rc.d/init.d/alsasound stop
>  /etc/rc.d/init.d/alsasound start
>  
>
Done. Here are my results: Is the message "Sequencer driver snd-seq-midi 
is already loaded" O.K. to ignore?

[root@localhost mikes]# cd /sbin/
[root@localhost sbin]# ./depmod -a
[root@localhost sbin]# cd
[root@localhost root]# cd /etc/rc.d/init.d/
[root@localhost init.d]# ./alsasound stop
Shutting down sound driver                                 [  OK  ]
[root@localhost init.d]# ./alsasound start
Starting sound driver snd-emu10k1                          [  OK  ]
Starting sound driver snd-usb-audio                        [  OK  ]
Starting sequencer                                         [  OK  ]
Starting sequencer driver snd-emu10k1-synth                [  OK  ]
Sequencer driver snd-seq-midi is already loaded
Restoring sound driver settings                            [  OK  ]
[root@localhost init.d]#

>If your midisport is plugged in you should see both cards. They should be listed
>in:
>  cat /proc/asound/cards
>
>-- Fernando
>  
>
Hmm... here's what I got: I'm a little concerned about card0, which is a 
directory. There doesn't seem to be any mention of the Midisport here. 
I'll reboot (read more below).

[root@localhost root]# cat /proc/asound/card
card0  cards
[root@localhost root]# cat /proc/asound/cards
0 [Live           ]: EMU10K1 - Sound Blaster Live!
                     Sound Blaster Live! (rev.7) at 0xdf80, irq 9
[root@localhost root]# cat /proc/asound/card0
cat: /proc/asound/card0: Is a directory

Just as a side note. Before applying all of the above changes, my system 
seems to be teetering between to states of operation. In one state of 
operation, I don't have my Midisport 8x8, but have system sound 
(beeps/notifications) from my SB512PCI. When I go to CCRMA to configure 
the sound card, I'll get system sound, but Qjackctl had a little problem 
starting the card, telling me that assertion failed. When I reboot, I'll 
have the Midisport 8x8 then, presumably because of the changes I made, 
but then I loose the sound card (second state of operation). Perhaps the 
new modules.conf file (above) with *two* cards configured in it will do 
the trick. Let me reboot, and I'll give you the details in a followup 
email to this one...

Thanks again, Fernando :-)
-Mike