[PlanetCCRMA] pd + midi

[derek holzer]

Thomas,

try using the Media --> Midi Settings menu in the main PD window. You 
should be able to use your RME after that. I get the same startup 
messages [almost], but can use my HDSP just fine after using the dialog.

good luck,
D.


thomas gorbach wrote:
> Hi List,
> 
> Following problem i have with midi and pd.
> 
> starting pd i get following midi information:
> 
> device -1: tried /dev/midi-01 READ/WRITE; returned -1
> device -1: tried /dev/midi-1 READ/WRITE; returned -1
> device -1: tried /dev/midi-01 READONLY; returned -1
> device -1: tried /dev/midi-1 READONLY; returned -1
> couldn't open MIDI input device -1
> device -1: tried /dev/midi-01 WRITEONLY; returned -1
> device -1: tried /dev/midi-1 WRITEONLY; returned -1
> couldn't open MIDI output device -1
> opened 0 MIDI input device(s) and 0 MIDI output device(s).
> 
> doing cat /proc/asound/cards i get:
> 
> 0 [Digi9652       ]: RME9652 - RME Digi9652
>                      RME Digi9652 at 0xe0000000, irq 9
> 1 [VirMIDI        ]: VirMIDI - VirMIDI
>                      Virtual MIDI Card 1
> 
> with "aconnect -i" i get:
> client 0: 'System' [type=kernel]
>     0 'Timer           '
>     1 'Announce        '
> client 72: 'Virtual Raw MIDI 1-0' [type=kernel]
>     0 'VirMIDI 1-0     '
> client 73: 'Virtual Raw MIDI 1-1' [type=kernel]
>     0 'VirMIDI 1-1     '
> client 74: 'Virtual Raw MIDI 1-2' [type=kernel]
>     0 'VirMIDI 1-2     '
> client 75: 'Virtual Raw MIDI 1-3' [type=kernel]
>     0 'VirMIDI 1-3     '
> 
> So the drivers seem to be ok.
> 
> But how can i tell pd the aktiv midi Device ?
> 
> cat /dev/midi01
> 
> is the only device that is aktiv.
> 
> Thanks for any help.
> 
> Greetns
> TOM
> 
> 
> 
> 
> 
> _______________________________________________
> PlanetCCRMA mailing list
> PlanetCCRMA@ccrma.stanford.edu
> http://ccrma-mail.stanford.edu/mailman/listinfo/planetccrma
> 


-- 
derek holzer ::: http://www.umatic.nl
---Oblique Strategy # 177:
"What is the reality of the situation?"