[PlanetCCRMA] audigy2 and cmedia - no sound no midi
michel access
michelaccess@yahoo.co.uk
Sat Oct 16 17:49:02 2004
sorry for this extension but just figured out
#/sbin/lsmod |grep snd and here are the results:
snd-opl3-synth 13156 0 (unused)
snd-seq-instr 8492 0 [snd-opl3-synth]
snd-ainstr-fm 3088 0 [snd-opl3-synth]
snd-emu10k1-synth 5884 0 (unused)
snd-emux-synth 36956 0 [snd-emu10k1-synth]
snd-seq-midi-emul 7212 0 [snd-opl3-synth
snd-emux-synth]
snd-seq-virmidi 5160 0 [snd-emux-synth]
snd-seq-midi-event 6304 0 [snd-seq-virmidi]
snd-seq 49968 0 [snd-opl3-synth
snd-seq-instr snd-emux-synth s nd-seq-midi-emul
snd-seq-virmidi snd-seq-midi-event]
snd-cmipci 27064 0
gameport 3380 0 [snd-cmipci]
snd-mpu401-uart 5680 0 [snd-cmipci]
snd-opl3-lib 9188 0 [snd-opl3-synth
snd-cmipci]
snd-pcm-oss 44872 0 (autoclean)
snd-mixer-oss 16728 1 (autoclean)
[snd-pcm-oss]
snd-emu10k1 87928 1 [snd-emu10k1-synth]
snd-pcm 86176 0 (autoclean)
[snd-cmipci snd-pcm-oss snd-emu10k 1]
snd-timer 21220 0 (autoclean) [snd-seq
snd-opl3-lib snd-pcm]
snd-hwdep 7104 0 (autoclean)
[snd-emux-synth snd-opl3-lib snd-e mu10k1]
snd-rawmidi 19840 0 (autoclean)
[snd-seq-virmidi snd-mpu401-uart s nd-emu10k1]
snd-util-mem 3112 0 (autoclean)
[snd-emux-synth snd-emu10k1]
snd-page-alloc 9336 0 (autoclean)
[snd-emu10k1 snd-pcm]
snd-ac97-codec 63464 0 (autoclean)
[snd-emu10k1]
snd-seq-device 6284 0 (autoclean)
[snd-opl3-synth snd-emu10k1-synth snd-emux-synth
snd-seq snd-opl3-lib snd-emu10k1 snd-rawmidi]
snd 49156 0 (autoclean)
[snd-opl3-synth snd-seq-instr snd- emux-synth
snd-seq-virmidi snd-seq-midi-event snd-seq snd-cmipci
snd-mpu401-uart snd-opl3-lib snd-pcm-oss
snd-mixer-oss snd-emu10k1 snd-pcm snd-timer snd-hwdep
snd-rawmidi snd-util-mem snd-ac97-codec
snd-seq-device]
soundcore 6692 15 (autoclean) [snd]
cheers again
michel
--- michel access <michelaccess@yahoo.co.uk> wrote:
> hi there all - just took the plunge last week with
> linux for the first time - first installed mandrake
> -
> had many problems and as noobie couldnt figure out
> head and tail than came across the ccrma site and
> the
> installation pages with the step by step detailed
> decriptions won me over so createted another
> partition
> and installed fc1. Up to here everything ok (i think
> -
> didnt check sound as continued imidiatly with the
> ccrma instalation) - than upgraded the kernel and
> booted into the ccrma kernel - all works - than came
> alsa and ruined my weekend...
> after many searched and editing various files i've
> ended up with the following
> modules.conf -
>
> alias eth0 8139too
> alias char-major-81 bttv
> alias usb-controller usb-uhci
> alias ieee1394-controller ohci1394
>
> # --- BEGIN: Generated by ALSACONF, do not edit. ---
> # --- ALSACONF verion 1.0.4 ---
> alias char-major-116 snd
> alias char-major-14 soundcore
> alias snd-card-0 snd-emu10k1
> alias snd-card-1 snd-cmipci
> alias sound-slot-0 snd-card-0
> alias sound-service-0-0 snd-mixer-oss
> alias sound-service-0-1 snd-seq-oss
> alias sound-service-0-3 snd-pcm-oss
> alias sound-service-0-8 snd-seq-oss
> alias sound-service-0-12 snd-pcm-oss
> alias sound-slot-1 snd-card-1
> alias sound-service-1-0 snd-mixer-oss
> alias sound-service-1-1 snd-seq-oss
> alias sound-service-1-3 snd-pcm-oss
> alias sound-service-1-8 snd-seq-oss
> alias sound-service-1-12 snd-pcm-oss
> #--- Options
> options snd major=116 cards_limit=2 device_mode=0666
> device_gid=0 device_uid=0
> options snd-emu10k1 index=0
> options snd-cmipci index=1
> options snd-cmipci mpu_port=0x330 fm_port=0x388
> #--- Keep modules from being autocleaned
> add options -k snd-card-0
> add options -k snd-card-1
> # --- END: Generated by ALSACONF, do not edit. ---
>
> -----------------# cat /proc/asound/oss/sndstat
> Sound Driver:3.8.1a-980706 (ALSA v1.0.4 emulation
> code)
> Kernel: Linux localhost.localdomain
> 2.4.26-1.ll.rhfc1.ccrma #1 Sat Apr 17 21:19:40 PDT
> 2004 i686
> Config options: 0
>
> Installed drivers:
> Type 10: ALSA emulation
>
> Card config:
> Sound Blaster Audigy2 (rev.4) at 0x9400, irq 10
> C-Media PCI CMI8738-MC6 (model 55) at 0xb800, irq 11
>
> Audio devices:
> 0: EMU10K1 (DUPLEX)
> 1: C-Media PCI DAC/ADC (DUPLEX)
>
> Synth devices: NOT ENABLED IN CONFIG
>
> Midi devices:
> 0: Audigy MPU-401 (UART)
> 1: MPU-401 MIDI 1-0
>
> Timers:
> 7: system timer
>
> Mixers:
> 0: SigmaTel STAC9721/23
> 1: CMedia PCI
>
> Q1 - Does 'synth devices: NOT ENABLED IN CONFIG'
> sounds right? where is the synth of the audigy? or
> the
> onboard cmedia?
>
> Q2 - Where does the SigmaTel turned out from? never
> heard of it as part of the audigy2 chipset...
>
> than after /sbin/chkconfig --add alsasound
> on /sbin/chkconfig --list alsasound
> i get:
> alsasound 0:off 1:off 2:on 3:on 4:on
>
> 5:on 6:off
>
> Q3 are they supposed to be off?
>
> state after all this - no sound from both cards,
> kmid
> (the only programme i can figure out to check my
> midi
> input) dont show anything in midi devices and in the
> volume control mixer i have a tab for cmedia and one
> for sigmatel but no emu10k1...
>
> can anyone help with shedding some light on my
> missing
> audio? and if possible in very simple terms...:)
>
> cheers
> michel
>
>
>
>
>
>
___________________________________________________________ALL-NEW
> Yahoo! Messenger - all new features - even more fun!
> http://uk.messenger.yahoo.com
>
> _______________________________________________
> PlanetCCRMA mailing list
> PlanetCCRMA@ccrma.stanford.edu
>
http://ccrma-mail.stanford.edu/mailman/listinfo/planetccrma
>
___________________________________________________________ALL-NEW Yahoo! Messenger - all new features - even more fun! http://uk.messenger.yahoo.com