[PlanetCCRMA] FC5 sound trouble

[Nigel Henry]

On Saturday 31 March 2007 02:51, Tom Poe wrote:
> aplay xyz.wav
> Playing raw data 'xyz.wav' : Unsigned 8 bit, Rate 8000 Hz, Mono
>
> results:  /proc/asound/devices
> 0: [ 0]   : control
>  1:        : sequencer
>  4: [ 0- 0]: hardware dependent
>  6: [ 0- 2]: hardware dependent
>  8: [ 0- 0]: raw midi
>  9: [ 0- 1]: raw midi
> 10: [ 0- 2]: raw midi
> 16: [ 0- 0]: digital audio playback
> 18: [ 0- 2]: digital audio playback
> 19: [ 0- 3]: digital audio playback
> 24: [ 0- 0]: digital audio capture
> 25: [ 0- 1]: digital audio capture
> 26: [ 0- 2]: digital audio capture
> 33:        : timer
>
> results: /proc/asound/cards
> 0 [Live           ]: EMU10K1 - SBLive! Value [CT4670]
>                      SBLive! Value [CT4670] (rev.4, serial:0x201102) at
> 0x10a0, irq 11
>
> alsamixer checked, everything up, but still no sound.  Any suggestions?
> Tom

Hi Tom. Are you sure you've checked all the muted buttons on Alsamixer? I've 
got an Audigy2 soundblaster, and on FC5 the card set itself up with no 
problems. The sliders I need up for sounds are "Master", "PCM", "Front", and 
"Audigy C" (for cd playback). Also, I'm in Debian at the moment, but I think 
on FC5, "Master" has a mute button, also "PCM", and further on to the right 
with the right arrow you come to a mute button with no slider, named "Audigy 
A". Use the "M" key to toggle their state. Unmuted they should show up as two 
circles on a green background.

Nigel.