[PlanetCCRMA] qjackctl not starting

[Fernando Lopez-Lezcano]

On Thu, 2007-09-06 at 18:05 -0400, John Dey wrote:
> Fernando,
> 
> Here is the output you requested and as always--thanks.
> [root@localhost robo6]# cat /proc/asound/cards
>   1 [default        ]: USB-Audio - C-Media USB Headphone Set
>                        C-Media USB Headphone Set   at 
> usb-0000:00:1d.2-1, full speed
>   2 [Intel          ]: HDA-Intel - HDA Intel
>                        HDA Intel at 0xee400000 irq 21

The onboard soundcard is your second card, most probably that is the
problem (try pointing qjackctl to "hw:1" instead of "hw:0" and see if
that fixes the problem). 

Try booting without the USB headset connected, or change the order of
the cards in the "System", "Administration", "Soundcard Detection"
panel, the second tab "Settings" lets you change the order of the
soundcards (you may have to reboot). 

-- Fernando


> [root@localhost robo6]# cat /proc/asound/devices
>    2:        : timer
>    3:        : sequencer
>    4: [ 2- 1]: digital audio playback
>    5: [ 2- 0]: digital audio playback
>    6: [ 2- 0]: digital audio capture
>    7: [ 2]   : control
>   10: [ 1- 0]: digital audio playback
>   11: [ 1- 0]: digital audio capture
>   12: [ 1]   : control
> 
> John
> 
> On Sep 6, 2007, at 5:04 PM, Fernando Lopez-Lezcano wrote:
> 
> > On Thu, 2007-09-06 at 16:44 -0400, John Dey wrote:
> >> Hi list,
> >>
> >> It seems that my sound card is not being detected.  I just updated my
> >> ccrma.  Sound was working before the update.  Any thoughts and/or
> >> suggestion would be greatly appreciated.
> >
> > Which version of Fedora? What is it that got updated? ("rpm -q -a
> > --last" will show you a cronological ordered list of package updates).
> >
> > What do you see in:
> >
> >   cat /proc/asound/cards
> >   cat /proc/asound/devices
> >
> > What soundcard(s) do you have?
> > -- Fernando
> >
> >
> >> 1. System->Administration->Soundcard Detection shows proper sound card
> >> as default and plays sample sound.
> >>
> >> 2. Command "speaker-test" does not produce any sound.  Error messages: