[PlanetCCRMA] SCSI emulation?

[Fernando Pablo Lopez-Lezcano]

On Wed, 2004-04-14 at 11:52, Jesse Kaufman wrote:
> On Wed, 2004-04-14 at 13:38, Fernando Pablo Lopez-Lezcano wrote:
> > 2.6.x is different with regards to ide-scsi, you do not need to use the
> > kernel boot option AFAIK. Apparently you just point an up to date
> > version of cdrecord to the device and that's it, no ide-scsi emulation
> > needed (or wanted, it was a pretty bad kludge). 
> 
> awesome!  now, if only ATI would come out w/ drivers that work for the
> 2.6.x kernel series ...
> 
> until then, is there a way to use hdparm to tweak settings on a CD/DVD
> burner that's using SCSI emulation?

You mean, under 2.4.x?
You can tweak the DMA and other parameters by pointing to the proper
device (under 2.4.x), for example:
  /sbin/hdparm /dev/hdc
will print the current setup if your cdrom/whatever is connected as
master on the second ide interface. 

AFAIK there is nothing to tune in the ide-scsi layer...
-- Fernando