[PlanetCCRMA] delay of 164316.000 usecs exceeds estimated spare time of 2632.000; restart ...
Cezar
cezar@mixandgo.ro
Fri Mar 23 04:03:05 2007
Hi,
I can't seem to find a way to reproduce that, but I found another
thingy:
I've left my box running with jack started all night. In the morning,
no xrun. But today I've played with it a bit trying to stress it
somehow to see if it breaks. So I found out that, if I have hydrogen
running with a beat playing over and over again, and qsynth loaded,
and both thru jack-rack, and I switch workspaces, I get xruns, a lot
of xruns.
And one more thing, Dynamic Sledgehammer in jack-rack, crashed
jack-rack and hydrongen one, I am still trying to reproduce it
cause for some reason it doesn't happen anymore. Maybe I have to
load more effects.
Best regards and thanks for this great project.
Cezar
Fernando Lopez-Lezcano <nando@ccrma.Stanford.EDU> writes:
> On Wed, 2007-03-21 at 14:56 +0200, cezar@mixandgo.ro wrote:
>> I get this error; when I connect to jack a new app I think !?
>>
>> delay of 164316.000 usecs exceeds estimated spare time of 2632.000;
>> restart ...
>
> Hmmm, that's a big delay.
> If it only happens when you connect or disconnect an application then it
> should not worry you. Jackd is not "connection safe" in the sense that
> connecting and disconnecting from the graph can cause xruns or delays.
>
> Which app are you connecting/disconnecting? Does it work in normal
> conditions? (ie: without connect/disconnect activity).
> -- Fernando
>
>
>> cat /proc/interrupts
>> CPU0 CPU1
>> 0: 352 0 IO-APIC-edge timer
>> 1: 11 1361 IO-APIC-edge i8042
>> 6: 6 0 IO-APIC-edge floppy
>> 7: 0 0 IO-APIC-edge parport0
>> 8: 1 0 IO-APIC-edge rtc
>> 9: 1 0 IO-APIC-fasteoi acpi
>> 12: 348914 0 IO-APIC-edge i8042
>> 14: 51808 0 IO-APIC-edge ide0
>> 15: 807 69182 IO-APIC-edge ide1
>> 16: 2767 3333778 IO-APIC-fasteoi yenta, hdsp, eth0
>> 17: 0 0 IO-APIC-fasteoi uhci_hcd:usb3
>> 18: 0 0 IO-APIC-fasteoi uhci_hcd:usb1, uhci_hcd:usb4
>> 19: 0 0 IO-APIC-fasteoi uhci_hcd:usb2
>> 20: 0 0 IO-APIC-fasteoi ehci_hcd:usb5
>> 21: 26758 0 IO-APIC-fasteoi eth1
>> 22: 0 0 IO-APIC-fasteoi Intel ICH5
>> NMI: 0 0
>> LOC: 1106305 1004134
>> ERR: 0
>> MIS: 0
>> --------------------------------------------------------------------------------------------------------------------
>> lspci -vvv
>> 00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM
>> Controller/Host-Hub Interface (rev 02)
>> Subsystem: ASUSTeK Computer Inc. P5P800-MX Mainboard
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B-
>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort+ >SERR- <PERR-
>> Latency: 0
>> Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
>> Capabilities: [e4] Vendor Specific Information
>> Capabilities: [a0] AGP version 3.0
>> Status: RQ=32 Iso- ArqSz=2 Cal=2 SBA+ ITACoh- GART64-
>> HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
>> Command: RQ=1 ArqSz=0 Cal=2 SBA+ AGP- GART64- 64bit- FW-
>> Rate=<none>
>>
>> 00:01.0 PCI bridge: Intel Corporation 82865G/PE/P PCI to AGP Controller
>> (rev 02) (prog-if 00 [Normal decode])
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR+ FastB2B-
>> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>> Latency: 64
>> Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
>> I/O behind bridge: 0000f000-00000fff
>> Memory behind bridge: fc900000-fe9fffff
>> Prefetchable memory behind bridge: d7f00000-f7efffff
>> Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
>> <TAbort- <MAbort+ <SERR- <PERR-
>> BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
>>
>> 00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI
>> Controller #1 (rev 02) (prog-if 00 [UHCI])
>> Subsystem: ASUSTeK Computer Inc. P5P800-MX Mainboard
>> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B-
>> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>> Latency: 0
>> Interrupt: pin A routed to IRQ 18
>> Region 4: I/O ports at ef00 [size=32]
>>
>> 00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI
>> Controller #2 (rev 02) (prog-if 00 [UHCI])
>> Subsystem: ASUSTeK Computer Inc. P5P800-MX Mainboard
>> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B-
>> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>> Latency: 0
>> Interrupt: pin B routed to IRQ 19
>> Region 4: I/O ports at ef20 [size=32]
>>
>> 00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI
>> Controller #3 (rev 02) (prog-if 00 [UHCI])
>> Subsystem: ASUSTeK Computer Inc. P5P800-MX Mainboard
>> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B-
>> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>> Latency: 0
>> Interrupt: pin C routed to IRQ 17
>> Region 4: I/O ports at ef40 [size=32]
>>
>> 00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI
>> Controller #4 (rev 02) (prog-if 00 [UHCI])
>> Subsystem: ASUSTeK Computer Inc. P5P800-MX Mainboard
>> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B-
>> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>> Latency: 0
>> Interrupt: pin A routed to IRQ 18
>> Region 4: I/O ports at ef80 [size=32]
>>
>> 00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2
>> EHCI Controller (rev 02) (prog-if 20 [EHCI])
>> Subsystem: ASUSTeK Computer Inc. P5P800-MX Mainboard
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR+ FastB2B-
>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>> Latency: 0
>> Interrupt: pin D routed to IRQ 20
>> Region 0: Memory at febffc00 (32-bit, non-prefetchable) [size=1K]
>> Capabilities: [50] Power Management version 2
>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
>> PME(D0+,D1-,D2-,D3hot+,D3cold+)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>> Capabilities: [58] Debug port
>>
>> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2) (prog-if
>> 00 [Normal decode])
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR+ FastB2B-
>> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>> Latency: 0
>> Bus: primary=00, secondary=02, subordinate=06, sec-latency=64
>> I/O behind bridge: 0000d000-0000dfff
>> Memory behind bridge: fea00000-feafffff
>> Prefetchable memory behind bridge: 50000000-53ffffff
>> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
>> <TAbort- <MAbort+ <SERR- <PERR-
>> BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>>
>> 00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC
>> Interface Bridge (rev 02)
>> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B-
>> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>> Latency: 0
>>
>> 00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE
>> Controller (rev 02) (prog-if 8a [Master SecP PriP])
>> Subsystem: ASUSTeK Computer Inc. P5P800-MX Mainboard
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B-
>> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>> Latency: 0
>> Interrupt: pin A routed to IRQ 17
>> Region 0: I/O ports at 01f0 [size=8]
>> Region 1: I/O ports at 03f4 [size=1]
>> Region 2: I/O ports at 0170 [size=8]
>> Region 3: I/O ports at 0374 [size=1]
>> Region 4: I/O ports at fc00 [size=16]
>> Region 5: Memory at 54000000 (32-bit, non-prefetchable) [size=1K]
>>
>> 00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller
>> (rev 02)
>> Subsystem: ASUSTeK Computer Inc. P4P800 Mainboard
>> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B-
>> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>> Interrupt: pin B routed to IRQ 22
>> Region 4: I/O ports at 0400 [size=32]
>>
>> 00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER
>> (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
>> Subsystem: ASUSTeK Computer Inc. Unknown device 80b0
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B-
>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>> Latency: 0
>> Interrupt: pin B routed to IRQ 22
>> Region 0: I/O ports at e800 [size=256]
>> Region 1: I/O ports at ee80 [size=64]
>> Region 2: Memory at febff800 (32-bit, non-prefetchable) [size=512]
>> Region 3: Memory at febff400 (32-bit, non-prefetchable) [size=256]
>> Capabilities: [50] Power Management version 2
>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
>> PME(D0+,D1-,D2-,D3hot+,D3cold+)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>>
>> 01:00.0 VGA compatible controller: nVidia Corporation NV31 [GeForce FX
>> 5600] (rev a1) (prog-if 00 [VGA])
>> Subsystem: ASUSTeK Computer Inc. Unknown device 80fb
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B-
>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>> Latency: 64 (1250ns min, 250ns max)
>> Interrupt: pin A routed to IRQ 11
>> Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
>> Region 1: Memory at e0000000 (32-bit, prefetchable) [size=256M]
>> Expansion ROM at fe9e0000 [disabled] [size=128K]
>> Capabilities: [60] Power Management version 2
>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
>> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>> Capabilities: [44] AGP version 3.0
>> Status: RQ=32 Iso- ArqSz=0 Cal=3 SBA+ ITACoh- GART64-
>> HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
>> Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-
>> Rate=<none>
>>
>> 02:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
>> RTL-8139/8139C/8139C+ (rev 10)
>> Subsystem: ASUSTeK Computer Inc. Unknown device 8026
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR+ FastB2B-
>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>> Latency: 64 (8000ns min, 16000ns max)
>> Interrupt: pin A routed to IRQ 16
>> Region 0: I/O ports at d800 [size=256]
>> Region 1: Memory at feaffc00 (32-bit, non-prefetchable) [size=256]
>> Capabilities: [50] Power Management version 2
>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
>> PME(D0-,D1+,D2+,D3hot+,D3cold+)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>>
>> 02:0a.0 CardBus bridge: Ricoh Co Ltd RL5c475 (rev 81)
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B-
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>> Latency: 168
>> Interrupt: pin A routed to IRQ 16
>> Region 0: Memory at fea00000 (32-bit, non-prefetchable) [size=4K]
>> Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
>> Memory window 0: 50000000-53fff000 (prefetchable)
>> Memory window 1: 58000000-5bfff000
>> I/O window 0: 0000d000-0000d0ff
>> I/O window 1: 0000dc00-0000dcff
>> BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
>> 16-bit legacy interface ports at 0001
>>
>> 02:0c.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
>> RTL-8139/8139C/8139C+ (rev 10)
>> Subsystem: Realtek Semiconductor Co., Ltd. RT8139
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR+ FastB2B-
>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>> Latency: 64 (8000ns min, 16000ns max)
>> Interrupt: pin A routed to IRQ 21
>> Region 0: I/O ports at d400 [size=256]
>> Region 1: Memory at feaff800 (32-bit, non-prefetchable) [size=256]
>> Capabilities: [50] Power Management version 2
>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
>> PME(D0-,D1+,D2+,D3hot+,D3cold+)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>>
>> 03:00.0 Multimedia audio controller: Xilinx Corporation RME Hammerfall DSP
>> (rev 32)
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping+ SERR- FastB2B-
>> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>> Latency: 255
>> Interrupt: pin A routed to IRQ 16
>> Region 0: Memory at 58000000 (32-bit, non-prefetchable) [size=64K]
>>
>> --------------------------------------------------------------------------------------------------------------------
>>
>> Linux 2.6.20-0119.rt8.fc6.ccrmart #1 SMP PREEMPT Tue Feb 20 18:27:33 EST
>> 2007 i686 i686 i386 GNU/Linux
>>
>> --------------------------------------------------------------------------------------------------------------------
>>
>> ps -Leo pid,pri,rtprio,cmd |grep IRQ
>> 83 90 50 [IRQ-9]
>> 302 120 80 [IRQ-8]
>> 346 90 50 [IRQ-14]
>> 349 90 50 [IRQ-15]
>> 388 115 75 [IRQ-16]
>> 398 104 64 [IRQ-12]
>> 399 105 65 [IRQ-1]
>> 415 109 69 [IRQ-18]
>> 416 108 68 [IRQ-19]
>> 417 110 70 [IRQ-17]
>> 424 110 70 [IRQ-20]
>> 1146 90 50 [IRQ-6]
>> 1176 90 50 [IRQ-7]
>> 1590 114 74 [IRQ-22]
>> 2410 90 50 [IRQ-21]
>> 2918 90 50 [IRQ-4]
>> 2920 90 50 [IRQ-3]
>> 4861 21 - grep IRQ
>>
>> _______________________________________________
>> PlanetCCRMA mailing list
>> PlanetCCRMA@ccrma.stanford.edu
>> http://ccrma-mail.stanford.edu/mailman/listinfo/planetccrma
>
> _______________________________________________
> PlanetCCRMA mailing list
> PlanetCCRMA@ccrma.stanford.edu
> http://ccrma-mail.stanford.edu/mailman/listinfo/planetccrma
>
--
Simplify, simplify, simplify. -- Henry David Thoreau
Simplify. -- Wendy McElroy